Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Mahogany Platter

Posts

Mahogany Platter

#1

Barb Siddiqui

Mahogany Platter

Barb Siddiqui


African Mahogany, 16" in diameter, and about 1" deep.


Re: Mahogany Platter

#2

Re: Mahogany Platter

Carol Reed, Strawberry, AZ

Lovely, Barb.

Re: Mahogany Platter

#3

Chuck Jones - West TN

I like it--a lot

Chuck Jones - West TN

Nice bead work on the rim. I'm trying to figure out how you did the pattern. Branding? Very subtle. Nice.

Re: Mahogany Platter

#4

Barb Siddiqui

Re: I like it--a lot

Barb Siddiqui

Thank you, Chuck. 'Subtle' is exactly what I was going for. The rim has two U-shaped grooves with a 5/8" wide flat in between. I used one of Lee Valley's carvers' punches (square) on point to stamp the diamond patten around the rim.

Re: Mahogany Platter

#5

Katherine Kowalski

Re: Mahogany Platter

Katherine Kowalski

Beautiful platter Barb! Love the decoration!

Katherine

Re: Mahogany Platter

#6

Leo Cuellar

That is gorgeous...

Leo Cuellar

Barb! I agree with everyone else, I really love the understated pattern on the rim. Is it Khaya? I've got a couple of 13"w planks somewhere in my woodpile. I didn't think much of it for flat work, but it did seem to turn fairly nice.

Re: Mahogany Platter

#7

Looking good Barb!

Jorge Casta�eda

Re: Mahogany Platter

#8

Re: Mahogany Platter

matt overton

Great looking piece! I love the rim.

Re: Mahogany Platter

#9

Nice work

Randy Gleckler

Very nice platter, Looking good Barb.

Re: Mahogany Platter

#10

Re: Mahogany Platter

john lucas

Well done Barb I like the subtlety of the stamp. It's attractive but doesn't pull your eye away from the piece.

Re: Mahogany Platter

#11

Beautiful Platter!  Well Done.

greg haugen

Re: Mahogany Platter

#12

Barb Siddiqui

Thank you, everyone

Barb Siddiqui

and thank you, John Lucas, for all your helpful guidance on lighting tricks for a light tent. I was worried about losing the detail on that rim pattern, but your articles helped a lot. Still learning on the digital photography, and this 16" piece was almost too big for my small light tent, but it worked fairly well.

Re: Mahogany Platter

#13

Barb Siddiqui

Re: That is gorgeous...

Barb Siddiqui

Leo, I don't know what Khaya looks like, but this is Mahogany, and not a very good mahogany at that. It is very light when raw, here oiled with Watco Fruitwood, waxed and buffed. I was told when purchased, it is African Mahogany. Now some woodworkers tell me the African is usually darker than others, so I'm not sure. It was definitely darker a few years ago, and has lightened up considerably, much to my disappointment. Michael Dresdner saw a piece made of it some time ago, and questioned whether it was mahogany at all because it had lightened so much. I hope the Watco helps this one retain its color over time.

Re: Mahogany Platter

#14

Re: Mahogany Platter

Jennifer Indy.USA

Barb it's lovely! I want to see more of the detail in the rim though. It almost looks etched? Nice job on a very nice piece!

Jen

Re: Mahogany Platter

#15

Richard Allen

Re: Mahogany Platter

Richard Allen

Nice platter! Mahogany is so nice to turn and so predictable with how it works. I love the mahogany ages. That should make the subtle pattern become slightly more prominent over time.

Re: Mahogany Platter

#16

Barb Siddiqui

Platter rim

Barb Siddiqui

Thank you, Jennifer. I've long admired your rim treatments, and especially one you did with wide bands carved and colored with carving on each band going out from center. Seeing everyone's beautiful work before me, I'm finding it hard to be original with a rim treatment! Here is a closer photo of the edge, where I used a Lee Valley carver's punch, square on point, to stamp on the diamond pattern.


Re: Mahogany Platter

#17

Barb Siddiqui

Re: Mahogany Platter

Barb Siddiqui

Thank you, Richard. I could barely see the pattern before I oiled the piece, but finishing it brought up the detail just as I'd wanted it.

Re: Mahogany Platter

#18

Re: Mahogany Platter

Don at Central Illinois

I missed the rim embelisment at first glance. Just subtle enough to add a very interesting feature. Ya done good.

Re: Mahogany Platter

#19

Barb Siddiqui

:-)   ....Thanks!

Barb Siddiqui

Re: Mahogany Platter

#20

Re: Platter rim

Jennifer Indy.USA

I love it Barb. It's subtle but shows your dedication to keeping things in alignment and your attention to detail. If you got off at all with this pattern it would certainly stand out and I don't see that going on here. Very nice.

Jen

Re: Mahogany Platter

#21

Leo Cuellar

Re: That is gorgeous...

Leo Cuellar

Barb, everything that I've seen labeled as Khaya Mahogany has a rather orange cast to it just as your piece does. To me it seems to feel and work more like Philippine Mahogany. The stuff I picked up had some really interesting looking grain and random dark lines visible even though rough sawn. Turns out the grain in my boards changed directions worse than cottonwood, horrible for flat work :\

Re: Mahogany Platter

#22

Barb Siddiqui

Back view

Barb Siddiqui

Leo, I think of Phillipine Mahogany as 'Luan.' Aren't they the same thing? And it works terribly. Mine had at least one darker streak on it, barely visible from the back side just right of center. Do these streaks look like what you are talking about?


Re: Mahogany Platter

#23

Re: That is gorgeous...

Doug Trembath

I had guessed Philipine Mahogany as soon as I saw it, but there are a number of sister species, I think, that get lumped in and marketed as Mahogany (Barb is right on with Luan, it often shows up, as well). It takes some cherry pickin' to get boards that are compatible sometimes. Not so with our lon gone friend, Honduras Mahogany. (I still have almost 100 Bd ft of that hiding in the shop, and most of my friends covet it as much as I do).

I agree, Leo, this stuff can be a royal pain with grain directional changes, as well as texture and color variations, but when you finally get it smooth, I really like it. It finally darkens, like all wood, I guess, and takes stain nicely.

Barb, very nice work. I like it, along with everyone else...

Doug Trembath

Re: Mahogany Platter

#24

Really nice

Mike Foster

I love the subtle effect of the stamping. Something I may have to try at some point. Great work.

Re: Mahogany Platter

#25

Barb Siddiqui

Thank you, Mike. 

Barb Siddiqui