Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

New Copper Lidded Box

Posts

New Copper Lidded Box

#1

New Copper Lidded Box

Jennifer Indy.USA

Here's another copper topped box that I finished yesterday. Same style as before just a little different design. This one is made from Australian huon pine. From what I read about this wood, it comes from the oldest trees in the world. It's very tight growth rings make it wonderful to turn and it had an odd almost incense smell to it. I left the inside unfinished so the wood could tell it's story. Again, the copper top with the surprise inside. It's about 2.5" diameter and about 4" tall. Dyed with Tandy gel Midnight Black leather dye. I masked off the inside. The gel dye is much easier to control when you don't want everything covered in black.

Thanks for taking a peek. Comments Welcome.

Jen


Re: New Copper Lidded Box

#2

Ooops....

Jennifer Indy.USA

I was trying to edit a typo in the original post and inadvertently deleted it.

Doh!

Re: New Copper Lidded Box

#3

Re: Ooops....New Copper Lidded Box

Joe Donohue

Great design and execution Jennifer.

Question: is this the Tandy Eco-Flo water based dye product? If so, how do you handle the grain raising? Or is it not a problem?

Joe Donohue

Re: New Copper Lidded Box

#4

Leo Cuellar

Another great one!

Leo Cuellar

And I'm not just talking about the box, Jennifer! The work you post is inspirational.

Re: New Copper Lidded Box

#5

Katherine Kowalski

Re: New Copper Lidded Box

Katherine Kowalski

Another exquisite box! Beautiful, Jen!

Katherine

Re: New Copper Lidded Box

#6

Re: New Copper Lidded Box

Peter Lamb in SC

Again absolutely beautiful!

Peter

Re: New Copper Lidded Box

#7

Re: New Copper Lidded Box

Joanne in Point Pleasant, PA

Another winner, Jen. I like how the finial design echoes the embellishments on the box side. The copper is a great contrast to the black dye, but I'm curious as to what the wood looks like in its "naked" or clear coat state. I've not seen this wood before.

Re: New Copper Lidded Box

#8

Inside shot.....

Jennifer Indy.USA

Thanks Joanne. I know you have a soft spot for swirls and curly-q's!

Here's a better shot of the bare wood inside. It's pretty bland wood but what makes it so neat is that it is such tight grained pine. It's almost unrecognizable as a pine.

Jen


Re: New Copper Lidded Box

#9

Re: Another great one!

Jennifer Indy.USA

Thanks Leo. That sure did put a smile on my face!

Jen

Re: New Copper Lidded Box

#10

Barb Siddiqui

Re: Inside shot.....

Barb Siddiqui

Neat.

Jen, did you use your new hammers to dome-shape that lid over a turned wooden form?

Re: New Copper Lidded Box

#11

Re: Inside shot.....

Jennifer Indy.USA

Yes Barb I did. I first used a turned form that was hollowed to make the bowl shape of the copper, then a form that was domed to hammer the texture.

Jen

Re: New Copper Lidded Box

#12

Re: Ooops....New Copper Lidded Box

Jennifer Indy.USA

Thanks Joe,

Yes it is the Tandy Eco Dye. I thought the same thing when I first tried it but there doesn't seem to be an issue with grain raising. I do find that I need to apply two sometimes three coats but that's okay if I can control the flow of it. The Feibings leather dye is easier to work with because you just swamp the piece with it, but I do like being able to control the Tandy dye.

Jen

Re: New Copper Lidded Box

#13

Barb Siddiqui

Re: Inside shot.....

Barb Siddiqui

Thanks. It sure worked well!