I'm sure it would be.
Leo Cuellar
Terry. There is talk of building a new huge shipping complex on the coast of our county. If our politicians don't bollocks the deal I might be able to hop a container ship in a couple of years 
Knowledge You Can Build On — Est. 1998
I'm sure it would be.
Leo Cuellar
Terry. There is talk of building a new huge shipping complex on the coast of our county. If our politicians don't bollocks the deal I might be able to hop a container ship in a couple of years 
Re: New mods with a brighter
john lucas
Leo I don't think power would be a problem. I've run a very large chuck on my Carbo-Tec mini. Sure it doesn't come up to speed quite as fast but it seems to run just fine. I didn't see Terry's design earlier. That is pretty cool. I think mine would be easier to build. All you would have to do is drill holes.
Re: New mods with a brighter
Terry Scott
I have a large fly wheel Ive made 1100mm dia that Ive shown before that I just add lead weight to
Its not a problem getting it started its stopping the thing
I had to adjust my break on the stubby as the fly wheel wound of the spindle a few times.
Just for fun one day I had a LARGE piece on perfectly balanced and left it run after switching off I went and had a coffee and the thing was still spinning.1200 rpm that size just keeps going l.o.l
Re: New mods with a brighter
Leo Cuellar
John, I think for most people, what you have in mind would work quite nicely, and I'm a big believer in simpler & less expensive. That's why my first thoughts on the subject went straight to the junk pile.
God only knows what Terry will try to strap to his lathe next... the suggestions I made might not be up to the task! 
Re: New mods with a brighter
john lucas
Terry I had the same problem one day with my Powermatic. I had big heavy piece on the lathe and I must not have put the chuck on really tight. When I turned the lathe off the electronic brake made the chuck come loose and the bowl fortunately just hit the tool rest and stopped. I now tighten it more. I can see why the new crop of set screw chuck inserts are getting popular.