Eccentric turning lathe vibration revisited(Long)
Leo Cuellar
Hi All!
After Terry's post about using 2 jaws for holding work of an eccentric nature. I decided that there had to be a way for those of us without massive lathes to take advantage of this application without shaking our lathes & shops to pieces.
My solution was to make a faux jaw to which a counterweight could be attached to even out the forces from having the wood mounted off center.
First picture is of the lathe running with no chuck and my trusty coffee mug sitting on the ways...
You will notice no waves formed in the cup.
Second picture is with an off center blank spinning in the modified chuck...
You will notice a slight wave pattern from vibration. I would not even be able to set the cup on the lathe without the modified chuck!
Third picture is a shot of what the rig looks like while sitting still.
The bolts fit through the weight from the backside and screw into the faux jaw which has been drilled & tapped. This jaw must be the same thickness or slightly thinner than the original jaws so that it does not interfere with level placement of your stock. The bolts must also be no longer than the total thickness of the metal parts plus a lock washer for the same reason.
Fourth picture is a front view of the chuck along with the first set of weights I've made for it. 3/8th" thick steel mounted with 3/8th" bolts.
I've picked up some 1/2" & 3/4" steel as well to make additional weights from, believing that the nearer the mass is to center, the healthier it will be for the lathe and myself in the long run.
Hanging a weight over the top of the spindle was nowhere near as effective as this method. While I could have set the cup on the lathe, most of my drink would have splashed out.
Now I just have to turn some new jam chucks that will clamp into this size jaw.
Comments & questions are welcome as always.
Thank you for your time!
Leo
The easily adjustable variable weight will happen eventually. Changing the weights at this point is actually pretty easy, though, I'll need to make a few more in between the weights I have. The harder thing is removing the faux jaw when you need it centered. Might warrant investment in (yet) another chuck.
Got to play around with it a little yet tonight, tried some of those intersecting bowls that Terry does. Those are way harder than he makes it look!











