Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Lathe Gloat and question

Posts

Lathe Gloat and question

#1

Lathe Gloat and question

Ricc havens

Well it's a gloat for me! A few years ago due to being downsized I sold all my woodworking/woodturning equipment. Got my tax refund and Last weekend I decided to get back into the vortex of turning and bought a used Nova 3000 lathe. Got a great deal including leeson 1-1/2hp variable drive system, 2 bed extension, a Gary Sanders light stand, extra banjo, stand, stronghold chuck, slow speed grinder and wolverine system, and a couple bowl gouges.

Still need to acquire some other turning tools i.e. skew, parting, spindle, scrapers, bandsaw, etc.

Question: does anyone know anything about programming the GE driver controller model AF 300? the digital readout doesn't match the speeds on the belt pulleys.

Watch the classifieds as I will be posting soon one of the bed extensions for sale or trade for other turning related stuff.

Thanks

Ricc Havens

Elkhart, IN


img

Re: Lathe Gloat and question

#2

trying the lathe pic again

Ricc havens

trying the pic again


img

Re: Lathe Gloat and question

#3

Re: Lathe Gloat and question

Bill Howatt

Nice.

My guess is that the VFD is showing motor RPM which wouldn't be what you get at the spindle because of the pulley diameter ratios. I don't know if you could adjust it for more than one pulley ratio, and maybe not even that. If this is the case, you could make a table for actual vs indicated for each pulley ratio. However, I'll defer to the experts for a more informed opinion on whether programming it is possible.

My General has a chart to relate speed settings to the pulley ratio being used and the knob setting. I don't really use it - I just set the speed to what I feel is comfortable.

Bill

Re: Lathe Gloat and question

#4

Steven Antonucci

Thought the same thing

steven antonucci

I am not that hung up on the RPM reading as much as the qualitative aspects of it. 2000 RPMs is meaningless. Too fast or two slow is useful. I wouldn't get hung up on the number if it works (spins the wood).

Congrats and enjoy. My Nova continues to be my baby.

Steve

Re: Lathe Gloat and question

#5

Re: Lathe Gloat and question

Stuart Johnson

I don't have a speed display and to be honest I don't know why it makes any difference if you have variable speed. Turn at the safe speed for the piece. If you are turning an 8" bowl and your speed indicator said 1700 at what speed is the tool touching the wood on a 14" bowl?

Re: Lathe Gloat and question

#6

Re: Lathe Gloat and question

Harry in Beautiful Downtown Kulpsville

If you really need to know the speed, you can get a non-contact, laser tachometer. I got one on eBay for $16 including shipping. It reads within 1 rpm of the speed dial on my Nova DVR.

Re: Lathe Gloat and question

#7

Re: Lathe Gloat and question

Cyril Griesbach

I've got to go along with the others here, Ricc. Knowing the RPM is a neat thing but not really useful. I was over at a friends yesterday to see and turn on his new Robust American Beauty. He previously had a PM 3520B like mine and when he wondered about not having an RPM readout I told him he wouldn't miss it. Yesterday he told be I was right...he doesn't miss having the readout.

Looks like you got a great deal to reenter the turning world. Welcome back.

Re: Lathe Gloat and question

#8

Re: Lathe Gloat and question

Ricc havens

Thanks for your replies everyone. I guess it's not that important and I may check on getting a laser tach like Harry suggested. Gadgets are always fun to have!!

Thanks

Ricc