Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Lathe for a new turner

Posts

Lathe for a new turner

#1

Lathe for a new turner

Earl

Hello all I am a flat wood worker but a project coming up and I will need to turn some parts. I have been thinking about a lathe for awhile and this is an excuse to get started. I was looking at the jet (1220) and the delta (46-455). I was going thru my grizzly catalogue looked at their offering (go658). They are all midi lathes and pretty close on price and spec's. The grizzly does have variable speed and outboard turning. Would those 2 features give the grizzly an advantage? Anyone know any bad things about any of these machine's? Thanks for any help you can offer. Earl

Re: Lathe for a new turner

#2

Richard Allen

Re: Lathe for a new turner

Richard Allen

More important than the lathe is learning how to use it. The best thing you could do is join the nearest woodturning club. These clubs are located all over the the US.

I would avoid the Grizzly. The Jet or Delta would be a better choice. I would lean towards the Jet but either the Jet or the Delta would be a good choice.

Re: Lathe for a new turner

#3

JL

Re: Lathe for a new turner

JL

Variable speed is a plus. I would lean toward the Delta 46-460 rather than the Delta 46-455. Another plus is the greater power (1 hp).

If you aren't considering the Delta 46-460 - the Grizzly does look better. Variable speed (IMO) is worth a lot. So is the capability of reversing if possible.

Re: Lathe for a new turner

#4

Re: Lathe for a new turner

Mike Brazeau

FWW #215 Dec. 2010 has a review article on the current crop of Midi's. We have two of the new Delta 460's in our Golden Horseshoe guild and I bought a slightly used one last summer for my Grandons to get started on eventually. Very impressive little lathe. They are knocking the socks of the people who turn on them. I would spend the extra to go for the 1 HP motor and VS.

Re: Lathe for a new turner

#5

Ken Vaughan

Re: Lathe for a new turner

Ken Vaughan

Was in the Tucson Woodcraft yesterday and saw the Delta VS on sale for $509 - I have turned on that lathe and am impressed.

I use a Jet 10 inch by 14 Variable Speed here in Tucson while snobirding and can not really justify the change but temptation is there.

Try to get "hands on" opportunity so you know the feel and sound of the lathe. The little things not in a spec sheet do make a difference.

Re: Lathe for a new turner

#6

Re: Lathe for a new turner

Duane Wiedman

Here's another vote for the Delta 46-460 (Variable speed). Many woodturners buy a first lathe to 'see if they like it'. Then they get sucked into the vortex of woodturning and want to upgrade to a better lathe. By not buying the first lathe and get the better lathe in the first place you have saved yourself the cost of two lathes. Good news!!. The Delta 46-460 is on sale at Woodcraft until March 3rd.

Duane Wiedman

Re: Lathe for a new turner

#7

Re: Lathe for a new turner

Brian George

All the earlier comments about the 46-460 are accurate. VS, indexing and bigger motor are all definite advantages. If you decide you don't want to get caught by the vortex, heaven forbid, it will be much easier to resell. I started on a Jet 1014 VS and love it but, if the 46-460 had been available I would have bought it instead.

Re: Lathe for a new turner

#8

Re: Lathe for a new turner

Peter Lamb in SC

+ for Delta 460. Mine has done all I have asked of it for the reasons stated above.

Peter

Re: Lathe for a new turner

#9

Re: Lathe for a new turner

Todd Nebel

I have the Delta 46-455 and really like it. I bought this over the VS because in 2001 I bought a Delta 16-42 Steel Bed VS and used it occasionally. In fact it wasn't used for a few years in a row. In 2009 the VS controller went and Delta told me in so many words; "that's what to expect, they don't last but 10 years - use or no use". It was ~60% of what I paid for the lathe new to replace that controller. Lucky for me a guy from Baldor came to my rescue with a replacement part at a sizable discount and a bowl I turned for him. So, for me I decided that since my interest in turning comes and goes, I would stick with a model that will stand some time in my workshop. I actually bought the Jet 1220 and returned it to buy the Delta. Better design and fit & finish on the Delta.