Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Glaser/CET Tools?

Posts

Glaser/CET Tools?

#1

Glaser/CET Tools?

Barry

Has the Glaser/CET line of tools disappeared completely? I have one of their 5/8" bowl gouges and have been satisfied. Just curious.

I have also been very satisfied with anything I have purchased from Doug Thompson. If I need any additional tools, I am sure they will be either Thompson or Crown.

I like Sorby's, but not at the current price point. If a company could ever price themselves out of business, I think Sorby just may have done it.

Re: Glaser/CET Tools?

#2

Rob Wallace

Re: Glaser/CET Tools?

Rob Wallace

Barry asked:

Has the Glaser/CET line of tools disappeared completely? I have one of their 5/8" bowl gouges and have been satisfied. Just curious.

Yes, I am pretty sure we can declare them functionally extinct in our lifetime.

Like you, I really like my Glaser gouge (I have a 5/8" 15V in the Glaser design made by CET), however there seems to be no likely offering of any more of the Glaser-designed tools in the foreseeable future. I have previously spoken to CET's Paulo Marin several times, and he has repeatedly assured that the tools would be offered "in the future", however in my opinion, this is likely to never happen. I have no faith that this 'future' will ever get here. Some years ago, I had the good fortune to meet Jerry Glaser and found him to be an outstanding person; it is very unfortunate indeed that his strong legacy of excellent turning tool designs and quality "named" tools will no longer be available to the woodturning world.

I have come to REALLY like the gouges offered by Doug Thompson (I suppose I have a total of about 6 of them) as having excellent quality (great flute geometry, top-notch tool steel & hardening, edge holding, etc.) at affordable prices. Great bang for the buck. I now advise new turners who are in the major tool acquisition mode to select Thompson Lathe Tools as a wise investment - a better investment than most new Sorby tools, particularly if having to buy them at full retail price.

I would not advise holding one's breath or waiting for CET to produce any Glaser turning tools in the foreseeable future. I might be eventually proven wrong, but I don't think so; I have arrived at the conclusion that this 'eventually' will be a very long time coming, if ever.

Rob Wallace

Re: Glaser/CET Tools?

#3

Re: Glaser/CET Tools?

bob elliott

Careful Rob, you may evoke another friendly, reassuring reply from Paulo stating the company is still alive and kicking, ready to supply the woodturning community in the near future.

Re: Glaser/CET Tools?

#4

Re: Glaser/CET Tools?

Barry

It's really such a shame, what with a legacy like Jerry Glaser left. My CET/Glaser 5/8" bowl gouge is a red handle, so I guess that makes it a 10V. I have been completely satisfied with it. I lost the end cap after a couple of weeks and contacted CET for a replacement. I found Paulo Marin very nice to deal with. When my end cap did not arrive, I sent another email. I got another response from Paulo, and not one but two end caps, in the mail shortly after. I saw the tools at Louisville AAW and the entire line-up was very impressive. Unfortunately, it takes more than that to maintain a following.

So far, I have a couple of Doug Thompson gouges. I have found them to be completely satisfactory. Now he has several handles available. The extruded aluminum with lead shot handle appears very similar to the Glaser handles. I think Doug will continue to expand his line of quality tools and I think his line will be the "go to" tools for a lot of woodturners.

Re: Glaser/CET Tools?

#5

Richard Allen

Re: Glaser/CET Tools? *LINK*

Richard Allen

I doubt that woodturning will be impacted either way buy new Glaser/CET tools.

I suspect that the carbide insert tools will be the tools of choice in the years to come. The inserts cost about $2, yea I know there is a little markup for these inserts when marketed to woodturners. $2 means that sharpening will be a thing of the past. Who is going to spend $50 for a bowl gouge when a $2 carbide insert can be used to produce the same woodturned objects?


$2 carbide inserts

Re: Glaser/CET Tools?

#6

Re: Glaser/CET Tools?

Brian George

Have never heard of Glaser tools but, I can attest to the great value in the Doug

Thompson tools. They really keep an edge and are a real pleasure to use.

Re: Glaser/CET Tools?

#7

Keith Tompkins

Re: Glaser/CET Tools?

keith tompkins

HI Richard, Those carbide inserts are everywhere....planer heads, router bits, shaper cutters, etc. Like it or not, I agree they are here to stay.

Re: Glaser/CET Tools?

#8

Check Dougs site-

John Kaner

He recommends the V nose for replacing in Jerry's handle. He stated "don't let a good handle go unused" or to that effect...

Re: Glaser/CET Tools?

#9

Re: Glaser/CET Tools?

Barry

i agree. Glaser Tools used to be the "gold standard" while Jerry Glaser was in charge. After he sold the company to CET, there have been availability and other problems. Perhaps, the new owners will eventually get things sorted out.

In case you are intererested: http://glaserhitec.com/

Re: Glaser/CET Tools?

#10

Re: Glaser/CET Tools?

Chuck Engstrom

Hi folks -- I *think* I once read that Doug Thompson will supply his tools in proper size to fit into Glaser handles if you let him know what you are doing. Better check, though.

Best--

Chuck

Re: Glaser/CET Tools?

#11

Re: Glaser/CET Tools?

Doug Thompson near Cleveland

I have tools to fit any size handle on the market and it's still the best steel out there.

Re: Glaser/CET Tools?

#12

Re: Glaser/CET Tools?

Steve Worcester

It is pretty tough to train a carbide insert to cut the same way a bowl gouge does (at least for me).Like on the inside of a bowl.

I agree carbide inserts are awesome, and let me say the inserts are definitely not all alike, but I don't see them replacing my bowl gouges or detail gouges.

Plus startup for a custom carbide is SUPER EXPENSIVE.