I was watching a turning video tonight. The guy has lots of big expensive lathes in his shop and obviously knows what he's doing while turning. However when he described attaching the piece to the chuck he said you should turn a tendon. I hear this a lot. It's Tenon, not tendon. A tendon attaches muscles to bone. A tenon is a section of wood turned or cut down to fit into a mortise.
OK I'm off my soap box. Even on the soap box I'm still not very tall.
I'm with you on that one John- I saw the same video, and although I'm sure the guy has lots of confidence, he was also cutting against the end grain for both the tenon and the lower section of the hollow form. Maybe I have just seen too many really great turners demonstrate, but it's sort of frustrating to see so many folks working too hard without knowledge of better ways to do things. I realize there are lots of ways to get the final form, but just because the wood is coming of the tool doesn't mean the surface is really cut clean.
I think he could benefit from a few lessons from Jordan, or Mahoney, or Ellsworth, or Lucas, or Raffan, or Larsen, or ......
Not to get too picky, and certainly not argumentative, but a properly oriented (and sharpened) gouge will go uphill like that with very little discernable surface degradation, and if you change hands, no chips in your face. Many of the turners previously mentioned use that cut routinely.
I do, and show the cut to the audience during demos, pointing out the benefits...
How about this one. Almost without fail, at a show and tell session, someone will mistakenly identify the wood their project is turned from. To make it worse, they burn the species into the base. Recently a piece with fine grain and no visible pores, very similar to maple,with chatoyance, was identified as beech. Like oak, which it is related to, beech has visible rays....there was no way this piece was beech. Most likely it was a member of the birch family. I've seen maple confused with cherry, oak with ash, red oak with white oak, elm with oak. You get the idea...I've stopped discussing it, as I'm tired of being rebuffed by the experts.
Yes, there are times when I cut in the wrong direction (out of convenience, but knowing that I am). Why in the world anyone would teach that cut to rough off the corners is an immediate cause for concern!
Aside from having long splinters of wood break off into my face, the heat generated against your hand and the pressure of the wood hitting it makes it extremely uncomfortable. After one pass or maybe two, I doubt that edge is worth much too.
While there is more than one way to get wood off, there are certainly better ways than the way he showed. I went to his website to ask him, and he's producing very nice work, so I have no doubt that he has skills, but that thing really puzzled me.
Some people, one a very well known woodworker/woodturner who had a television show, another a well-known woodturning instructor/demonstrator calling them Fostner bits....they're Forstner bits.
I will be the last one to criticize someones spelling,as LOML is always correcting my choice of words,like hear,an here,always mixing up words like that,but Im 68 an there is a lot of things in life that I can do,an do well,just spelling an writing ain't one of em,but there is no way I will put someone in the dumb category,because of there lack of skills in any field.Rants over
When someone is describing something they made and its made of Cherry wood or Walnut wood. Of course its made of wood. Thats like saying I drive to work in my Ford car.
Hey John, what video was it? We all want to see....speaking of pet peaves, how about the phrase...."all things being equal". Seems to me, nothing is ever equal.
As my cousin Robert would say.... it would be nice if Americans were taught how to speak English, LOL, he lives in England.
When Dana was young we rented a video for her of Big Bird Goes To China, we thought it odd when in one scene Big Bird asked a Chinese child if "they spoke American" ... maybe not strange to hear in the US, but strange to many outside the US...
Spelling and sentence structure (written or spoken).. Simple things can make a big impression on others perceptions of the message being delivered.
Oh, goodness, there's a long list, but "very unique" gets me every time. Something is either unique (one-of-a-kind) or it is not. There are no varying degrees of uniqueness -- its all or none. I suppose it is possible to use "nearly unique", or "almost unique", but isn't "very rare" a better way to express that?
Thanks for mentioning "tendon" -- that is used here occasionally. My tendons are torn and sore from shoveling snow and raking roofs, but it has nothing to do with over-tightening my scroll chuck!
How about the pronunciation of "length" and "strength"? A lot of people drop the "g" so it comes out "strenth" or "lenth". I've even heard newscasters say it that way.
Also, there is a recent trend to say "gooder" instead of better. Emglish has specific rules for comparative modifiers. We were all taught them in school. Use them, please.
And don't get me started on "axe" for ask. You want to "axe" me something, I'm packing a Glock!
Several days ago I posted a request on the Wood Magazine "Off Topics" Forum, asking how to get in touch with the webmaster of the site to correct a glaring spelling error found on all of the forums pages on the WOOD site. (After considerable searching, there appears to be no way to get in touch directly with the webmaster on that site).
On each of the forum pages, there are sections which list Top "Kudoed" Articles and Top "Kudoed" Authors. I wanted to suggest a simple change on the web pages to the correct spelling of the past tense of the word kudos (which is really a noun, but can be used as a transitive verb, as in the act of bestowing praise), to the correct spelling of the past tense, as in 'kudosed'.
I was met by what I will call 'resistance' by people participating in that forum to my suggestion that the spelling be corrected, a relatively simple and benign change. In the end, the moderator just said "no" to any changes (aka.... corrections of spelling), despite the fact that hundreds, if not thousands, of people view the forum pages.
Even worse, one individual tried to educate me that 'kudo' was a pop-culture word (despite the origins of the word kudos in Ancient Greek, and its use for centuries), and that 'kudos' was the plural of 'kudo' (!), so when you 'kudo' someone, you do it once, and if you do it several times you give 'kudos'. He concluded that if you already did this (i.e. in the past), you 'kudoed' them. This is the way the word is used on the WOOD forums, so its use in this form was just fine there. Absolutely amazing.
I stand by the principle that you try to get it right when you can, and if you've made a mistake, you simply man up, correct the error, and move on. Unless we do pay attention to detail, maintain some standards, and go by the idea that 'spelling counts', particularly in places where one would expect to 'get it right', we will continue to see the degradation of English as a language, and as has been said previously, will continue to see the 'dumbing-down' of our society.
......and don't get me started on our modern students who now use abbreviated words, brought over from texting, when they write answers on exams and in composing term papers. I have no mercy for these errors.......
Pls dnt gt Ngre w me cuz ime startn 2 gt pssd off....K?