Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

TAW Symposium

Posts

TAW Symposium

#1

Chuck Jones - West TN

TAW Symposium

Chuck Jones - West TN

My wife and I just returned from Nashville and the TAW Symposium. Tired! We had a great time. Really good line-up of demonstrators and vendors and some extremely nice pieces on display. Stuart Baty, Bill Grumbine, Michael Mocho, and Molly Winton. Hard to beat that. I was exposed to a lot, hope I learned a little.

We sat with some of the Mid-South Woodturners (Memphis) folks, including Keith Burns, at the banquet and auction. That alone should improve my skills by a few points.

Is it possible that there is more than one John Lucas? Several folks have commented on how he seems to be everywhere; on the internet, in his shop, at work, attending symposiums. I saw several of his post just before I left for Nashville. Got to Nashville, there he was. Glanced at WC that night, there he was. Next day at the symposium there he was again. It's always a treat to get to talk with John. I learn something worthwhile whether I intend to or not.

The TAW folks really put on a good show. I always enjoy the opportunity to get together with them and with the Mid-South Woodturners Guild folks. Sometimes I wish we hadn't decide to retire so far out into the sticks, but I get over it quickly.

I posted some unsorted, unedited, unlabeled pictures from the TAW Symposium on our local club web site if anyone is interested. www.wtnwoodturners.com and click through to "Photos"... you'll find them.

Re: TAW Symposium

#2

Re: TAW Symposium

john lopez

"Is it possible that there is more than one John Lucas? Several folks have commented on how he seems to be everywhere; on the internet, in his shop, at work, attending symposiums. I saw several of his post just before I left for Nashville. Got to Nashville, there he was. Glanced at WC that night, there he was. Next day at the symposium there he was again. It's always a treat to get to talk with John."

Dude...

John Lucas is everywhere, :D

probably one of the hardest working people in the trade.

I have to respect that kind of energy.

Re: TAW Symposium

#3

Re: TAW Symposium

john lucas

Ha, If you just knew how tired I was last night. I drive back and forth to the symposium and I think that's a mistake. It does save money but it's an hour drive twice a day. Well it's an hour if you drive like I do. You see I chewed on my pencils when I was growing up and the lead in the paint apparently all landed in my right foot.

No, by not spending the evenings and breakfast time around the hotel you miss a lot of companionship. Consequently I didn't get to spend any free time with some of the best turners around.

What always amazes me about these things is the quality of the work in the instant gallery. Where do these people hide out. Most names you don't know. There are a lot of good turners out there.

I always have lunch with Doug Spahn of Chattanooga when I demo down there. I had never seen his work. He had a great piece. I'll post a photo later.

The folks from GotWood were there with a lot of bowl blanks. Pete from BigMonk lumber was there with his usual fantastic stock of exotics. Can't wait to get at the wood I bought there. Micheal Hare from VM woodworking was there and that cost me. He was out of the mini spiraling tools but unfortunately for me he was willing to take my money and send me one. Can't wait to get it.

I ran cameras for Micheal Mocho and he had some fantastic tips. Because of him I may resurrect my spiralling tool. I was never able to get it to cut clean. Thinking back on it I bought it used and after his lecture I realize that the previous owner probably messed up the edge using a grinder to sharpen it. I now have metal lathe and think I can put the cutters on there and restore the crispness of the edge. The coolest texture he showed was a Moire pattern insert piece. He did this with the threading tool. I didn't get a photo of this but will be making one shortly so I'll try to pass this on. His tip on using a metal drill bit gauge to accurately size small tenons was worth the price of admission. I'll try to pass that along later because it's just too cool and simple.

I spent the entire day cleaning the other house yesterday. Still have to replace the kitchen floor and refinish the living room floor, then clean up the outside of the house and yard and then I can get back to turning.

Re: TAW Symposium

#4

You're burning that candle .........

JamieDonaldson

..at both ends as usual John! Some good rockin' bluegrass music will help you stay awake in the car during those after hours commutes!

Re: TAW Symposium

#5

Re: TAW Symposium

John Jordan

John, you could stay with us next time. We had a good time, and spent the day with Michael yesterday. Fed him some sushi and took him to the airport.

John

Re: TAW Symposium

#6

Re: TAW Symposium

John Lucas

Thanks John I do have a 20 below sleeping bag so I could just camp near the log pile. :)

Re: TAW Symposium

#7

Re: TAW Symposium

Barry

I succumbed at both VM Woodworking and Got Wood's booth's. I bought a couple of tool blanks, 1/4" and 3/8" square. After watching Micheal Mocho use a Bedan during his demo's, I thought I would make my own and give it a shot. Still have to turn a couple of handles. I bought about as much wood as I could carry to the Jeep at Got Wood. I turned a small natural edge bowl from a maple burl blank today. Nice wood!