Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Shopsmith Turning Tools?

Posts

Shopsmith Turning Tools?

#1

Shopsmith Turning Tools?

Ron in Eugene

Greetings all,

Since I am not a wood turner and don't even own a lathe I'm asking for your assistance. I have 5 Shopsmith

Chisels that have barely been used by a friend. I have included the numbers stamped on the end of each tool in case it can be helpfull. Each is about 16 inches in length. I would like to find out what these might be worth.

Any opinions or guesstimates are appreciated - I know they will be more accurate than mine.

Thanks in advance for your help.

Ron


img

Re: Shopsmith Turning Tools?

#2

Re: Shopsmith Turning Tools?

fgvanatta

This sells as a 5 piece set on shopsmith.com:

505586

5-piece Lathe Chisel Set

Price $93.75

Frank

Re: Shopsmith Turning Tools?

#3

Re: Shopsmith Turning Tools? *LINK*

Dick Coers

Probably carbon steel, but for a reference, Harbor Freight has a high speed steel set for less than $50.


HF chisel set

Re: Shopsmith Turning Tools?

#4

Re: Shopsmith Turning Tools? *LINK*

Jim Pugh

Shopsmith lathe tools have been High Speed Steel (HSS) for years.

I would suggest half to 3/4 of what your friend paid would be a fair price. Let him suggest what he might want then go from there.


http://http://www.shopsmith.com/ownersite/catalog/l_lathechisels.htm

Re: Shopsmith Turning Tools?

#5

Re: Shopsmith Turning Tools?

Ron in Eugene

Thank you all for your input I greatly appreciate it. In the event anyone here might be interest - $55 plus shipping is probably fair. Just email me if you have an interest.

Re: Shopsmith Turning Tools?

#6

Brad Vietje

Re: Shopsmith Turning Tools?

Brad Vietje

Ron,

Chiming in late...

These are so common that they aren't worth all that much. They would probably have higher value if they were vintage, and matched with the original machine they came with.

I have a set like those that are much more used (and carbon steel). Mine were made in 1955, and came with the Mark-V that sits out in my barn. My son, now 29, has my dad's all-original 1957 ShopSmith and the turning tools it came with. That still makes them so-so tools, and the ShopSmith is, in my view, only a so-so lathe (the newer models are a little better), but its pretty cool to have a little piece of Woodworking Americana from the days when turning was so different than today.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Shopsmith Turning Tools?

#7

Re: Shopsmith Turning Tools?

Ron Berlier

Hi Brad, thanks for the update I appreciate the information.

Taking your note into consideration anybody need a backup set? $20 plus shipping, seem fair? If interested please email me-

Ron

Re: Shopsmith Turning Tools?

#8

Ron, tried to send an email and

John Kaner

I would like to get the ShopSmith tools. Thank you.