Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Three Hollow Forms

Posts

Three Hollow Forms

#1

Three Hollow Forms

Bob Verne

I've been following this message board for some time and have much admired and learned from the skill and artistic talent displayed by so many of its contributors. Thus far, I haven't contributed. So here's my shot at it.

I turned these hollow forms for my 3 adult kids for Christmas. I was really pleased with how they came out. All of them are from maple burl from here in eastern NC. I've taken to calling them "The Three Sisters," because of their similarities. Protecting the natural edges while turning them rather thin (~1/8") was interesting, to say the least.

Lately I have been drawn to the elegance of the more classical forms, thus the contours shown here. I'd be interested in any comments, especially on the shapes.

Sizes are 5 to 6 1/2 inches high and 4 to 5 inches in diameter. Finish is Waterlox, with Beall buffing (tripoli only) and Renaissance wax.

Happy Holidays to all.

Bob


Re: Three Hollow Forms

#2

Welcome Bob, and wow...

GaryG in MD

Thanks for sharing your work. Those are beautiful and well done. You did a great job with the thinness and keeping the bark on. I particularly like how they are all very different in shape. I wouldn't mind being on your Christmas list! ;-) We will look forward to seeing more of your excellent work. ...Gary

Re: Three Hollow Forms

#3

Leo Cuellar

Echoing the wow...

Leo Cuellar

Bob! They do indeed look like sisters. In fact they remind me of 3 of my step-mother's sisters; Matilda, Julia & Mary. Very nice work, thank you for sharing.

Merry Christmas!

Leo

Re: Three Hollow Forms

#4

Re: Three Hollow Forms

john lucas

Excellent Bob You did a great job. Not make that really great. Personally I would consider leaving the feet off the 2 on the right. I went through that phase where I felt like they wouldn't be stable enough without a base. After watching critic's by David Ellsworth and some other well known turners I decided mine didn't need feet either. Not having a foot on the middle piece would allow your eye to follow the form on around instead of focusing on the foot.

Re: Three Hollow Forms

#5

Chuck Jones - West TN

Has WOW already been used?

Chuck Jones - West TN

Re: Three Hollow Forms

#6

Re: Three Hollow Forms

fgvanatta

A beautiful and interesting array of pieces.

Frank

Re: Three Hollow Forms

#7

Re: Three Hollow Forms

matt overton

Beautiful. Great job keeping the bark intact.

Re: Three Hollow Forms

#8

Re: Three Hollow Forms

Bob Verne

I used a good amount of thin CA glue at various stages to keep the bark intact and attached. At the lip, I was careful to approach the edge from the outside to minimize the forces that would push the bark away from the wood. What was a big concern was keeping the edge intact along the openings in the middle at the bark inclusions. No way there to approach the bark edge from a preferred direction. It all stayed together, though. Maybe I had a little luck and some well-behaving pieces of wood.

Bob

Re: Three Hollow Forms

#9

Mike Stafford

Re: Three Hollow Forms-Beauties!

Mike Stafford

Beautiful work, Bob. I am glad you will be sharing your work on WC.

Now I hope you will bring those for the raffle at the next meeting.... :b

Merry Christmas to all and to all a good night.... :D

Re: Three Hollow Forms

#10

Bob Moffett

Re: Three Hollow Forms

Bob Moffett

I think I like the two on the right the best and the center one the best of those two. They are all beautiful. I have seen your finishes and I know how much care you put into your work and it certainly shows. I'm with Mike, I look forward to your putting them in the raffle at the next club meeting.

Re: Three Hollow Forms

#11

Re: Three Hollow Forms

Bob Verne

Sorry, Bob, but by the end of Christmas day I will no longer be the owner of any of them. You will have to negotiate with my kids if you want one of them. No doubt they'll be tougher to deal with than me.

I hope you have a nice holiday.

Bob