Re: Oneway Lathe
Bob Herrman
A great tool. Well worth the dollars spent. As with most things in life, you get what you pay for. A quality tool and a great company with customer and technical support which you can place value on.
Knowledge You Can Build On — Est. 1998
Re: Oneway Lathe
Bob Herrman
A great tool. Well worth the dollars spent. As with most things in life, you get what you pay for. A quality tool and a great company with customer and technical support which you can place value on.
Re: It's a very "pokey" lathe
Dick Hines
Why spend $5000 for a plan mayo lathe when you can get a mustard monster for $3500?
Reviews Here *LINK*
Jerry Hall
The Mustard Monster Site has a bunch of reviews that might help in addition to the good dialog here.
My two cents is that I would never have a lathe without a sliding headstock.
Mustard Monster
Video Reviews on different Lathes Here *LINK*
Jerry Hall
http://woodturningvideos.weebly.com/
Re: Oneway Lathe
Wally Dickerman in Arizona
My Oneway 2016 is my 9th and at my age no doubt my last lathe. I decided that I would get the best lathe available to suit my needs. It is almost $7000 well spent. My wife asked me if I could justify spending that much on a new lathe. I got our some records and started adding up what I've made in profit from teaching and from selling my work for a lot of years. It added up to a surprisingly large figure.
I'm a lefty and I want to stand facing the piece when I'm turning, so I went for an outboard bed. My present shop is quite small so I opted for the 16 inch between centers model. I have the swingaway tailstock holder which adds about 4 inches to the bed length. I find that being able to switch from the inboard to the outboard to accomodate whatever I'm turning is most convenient. Easier than having a sliding headstock to do the same thing.
I got the 20 inch model instead of 24 inch. My last lathe had a 26 inch swing and I used it for big stuff when I first got it. Now however, I seldom turn anything larger than 12 inches.
The service from Oneway has been top notch.
Wally
Re: Oneway Lathe
Emmett Manley, Lakeland, TN
I have had my OneWay 1224 for over five years now and it is a smooth running delight. If you wish to drive a four wheel truck, get a Mustard Monster -- if you prefer a sports car, get a OneWay -- both of them will get you there.
$15 Morse 3 to 2 adapter solves that issue
Mike Brazeau
Re: Oneway Lathe
Mike Brazeau
The 1640 was just being introduced when I ordered my 2436 seven years ago. At the time Canadians paid about a 20% premium and I have gotten over that. Sure the tailstock locks down very securely, but would rather have that than everyone that uses our guild General 260, criticize the slding tailstock. As Jim Shaver said a factory tour sure shows you the pride the Clay family has in their product. Oneway is the only company with the whole deal and they support it to the hilt. Robust had an excellent model to study and obviously took ideas from the Powermatic and from Oneway. We probably have 8 or 10 1640's and an equal number of 2400 series among our Golden Horseshoe Guild members. Have never heard a bad word. Put the outboard addition on a 2HP 1640 and you have the equivalent of the 2400 series for capacity. I am biased I guess because I live just over an hour from the factory, but I am one happy Oneway owner!
Re: Oneway Lathe
Stephen Mushinski
Lon,
I agree with everything everyone has written. One suggestion I have for you is to try and find someone in your area that has the lathes you are considering and ask to drop over for a test drive. It will be the only way you can make an informed decision on which lathe works for you.
I have turned on each of the lathe mentioned here and they will all do the same thing - turn wood. Personally I own a 1224 Oneway and have another homemade lathe with a 30 inch swing. I will turn to the 1224 for just about everything. As for power well I have done coring with it so that kind of speaks for itself.
I travelled down to the Robust "Break In" party that Bil Grumbine had and would never say a bad thing about the Made in the USA machine. It is impressive to say the least. Should I be in the market for another lathe it would be a Oneway or a Robust. I should also say I do avoid (when possible) anything that has to come by boat to get to my house.
Happy shopping!
Re:MAYBE.... solves that issue
Don Evans
You are absolutely correct but I would advise a person take the money and invest (as soon as can) in a MT3 Oneway tailstock. Every adapter etc that is strung out making the length greater is a combination for inaccuracy. It really doesn't make lot of sense to spend the money for a super accurate machine and then introduce things that take away from that. Off top of my head I'm thinking things like drilling etc so you need MT3 livecenter and drill chuck.
Sooner or later you'll also want an adapter to go on the Oneway LCenter to accurately do reverse chucking and it goes on from there.
Don
Re: $15 Morse 3 to 2 adapter solves that issue
Barbara Gill
When I ordered my 1640 I knew it would have a #3MT tailstock. Oneway details why they have that size by the way.
I made a small investment in another Jacobs chuck and the #3 insert for it. I followed Forest Addy's instructions of how to put them together. It was about as simple as you could get.
Re: $15 Morse 3 to 2 adapter solves that issue
john lucas
I use the adaptors some times on my metal lathe out of necessity and it does introduce inaccuracies compared to tools that properly fit the taper. For wood it probably isn't enough to make a difference but could introduce vibration.