I would like to make a Kaleidescope, the kind with a spherical lens at one end and I know not what inside and something(lens?) on the observation end. Anybody know how, and where to get parts.
Thanks in advance for any help you can offer. It's been a while since I made anything round.
All you need to do is hold 2 long skinny mirrors together along the long side. The viewing port (eye end) is located / tucked into the vertex of the mirrors. It can be as simple as a small hole. At the far end you put a chamber with stuff in it - actually anything you want to be Kaleidoscope'd. The smaller the angle between the two mirrors the more reversing segments in the view. The angle should also be such that it divides 360 a integral number of times (say 30 or 15 not 25)
Putting a third mirror on the open side of the mirror 'V' will hide being able to see whatever enclosure it ends up in but is not needed for the visual effect.
Lenses are not really needed but can be used to improve the experience. A big spherical lens outside of the viewing chamber can be used to draw more light in making the view brighter.
- Dave
(I made one with 1' x 6' mirrors when I was in HS, a large gimbal mount, no viewport or lenses. you just stuck your head in the center and pointed it at stuff)
Jim Duxbury has a website and dvd on turning a kaleidescope...I got the dvd from him at our local meeting sometime back....check out his website, the dvd is excellent:
Plan your escape from the chilly place you are currently residing and enjoy a demo and sunshine on sandy beaches in the same trip. Jim will be visiting family and getting in a little demo time too. Multi-tasking on vacation--what a concept. Actually, our clubs in Hawaii insist on it, as we are not responsible for the cost of demonstrators getting here. This message is a thinly veiled gloat and has not been approved by the Hawaii Tourism and Convention Bureau.