Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Starfish from under the Jordons tree

Posts

Starfish from under the Jordons tree

#1

Starfish from under the Jordons tree 

Terry Scott

If you dig down under the recently felled Maple at the Jordon's you will find that the sea bead many millions of years ago came to their front door /As the oceans evaporated they left behind many echinoderms .How this one survived intact with all those roots reaching out for the water is any ones guess

I had to make about 6 prototypes before I could finally risk my last piece of maple from the stash sent to me

Had me beat for a while but finally got there

Turned similar to my winged vessels

Some would say why not carve it well I am a turner and I could

My head just couldn't figure how to blend it all together

The color I used some oxide watered down and then blew off while wet with an air gun at 100 psI

The texturing on the spikes took an age as I made up a sharp needle then with a burner dot dot dot dot and more dot dot dot

I turned a spigot on top and bottom then hollowed through the spigot so then that spigot could be used to hollow through the other

I took this piece into our club last night I was quite chuffed as many ah's and oo's were herd And also some other words which are not repeatable here

Know that I have it sorted I plane on doing a big one this is 6 or 7 inches across the spikes

Comments welcome


Re: Starfish from under the Jordons tree

#2

Re: Starfish from under the Jordons tree

Terry Scott

The last picture is of the vessel up side down

I also manged with a bit of smacking my Kelton mini set around in the vice to get in and under cut this vessel right to the spikes

A few anxious moments as I had the tip well off centre

Re: Starfish from under the Jordons tree

#3

Bill Blasic

Re: Starfish from under the Jordons tree

Bill Blasic

Terry,

Awesome piece, just awesome.

Bill

Re: Starfish from under the Jordons tree

#4

Re: Starfish from under the Jordons tree

Randy Gleckler

always amazing work Terry and it's great to see what you come up with and turn. Another beautiful piece.

Re: Starfish from under the Jordons tree

#5

Re: Starfish from under the Jordons tree

George Van Beynen

Terry, I picture a mad scientist working all night on a mission to solve a problem. Your solutions turned out to be stunning!

I enjoy your story, you must occasionally watch the Science Channel. :)

Re: Starfish from under the Jordons tree

#6

Re: Starfish from under the Jordons tree

Bill Neddow

I agree.

Re: Starfish from under the Jordons tree

#7

Steven Antonucci

6 prototypes, huh?

steven antonucci

I musn't be trying hard enough. I would have probably given up at 3...

Nice work. 7 spikes? 7 doesn't divide easily into 360... :)

S

Re: Starfish from under the Jordons tree

#8

Re: Starfish from under the Jordons tree

Matt Overton

Does your mind ever stop imagining? Wonderful, as always.

Re: Starfish from under the Jordons tree

#9

Chuck Jones - West TN

uh, Steven, you missing a finger? 

Chuck Jones - West TN

Re: Starfish from under the Jordons tree

#10

Steven Antonucci

ahhh... 8.  I see the one I missed hiding now!

steven antonucci

I figured Terry was man enough to try to do something crazy like 7...

S

Re: Starfish from under the Jordons tree

#11

Re: Starfish from under the Jordons tree

Bill Clark

Beautiful and amazing piece Terry. Really like everything about it. The branding, color, form ....... All great!

Re: Starfish from under the Jordons tree

#12

Re: Starfish from under the Jordons tree

John Jordan

Very cool, Terry. This actually was a tropical sea-our limestone is filled with all sorts of sea creature fossils. :)

Thanks for doing it-be sure to send Vicki her large photos.

John

Re: Starfish from under the Jordons tree

#13

But You Didn't Hollow The SPIKES???

George Guadiane

Seriously, as usual, yours is an inspired piece of work. Very cool!

Now, did you carve the spikes THEN hollow the piece or did you hollow it then carve?

Re: Starfish from under the Jordons tree

#14

Re: Starfish reply to questions

Terry Scott

Glad you all like this piece your comments are

what drive me to try new ideas Thank you

The Process was like this

Mark out the starfish shape cut out on the band saw then turn the spikes and shape them

Next I turned the inside by holding on a spigot top and bottom

First I drilled a hole right through

The wall thickness was gauged with the fingernail tap test (hence 6 prototypes went though into the void between the spikes 3 times the other 3 I lost the wings as they snapped off were the grain ran across the points

Sort of a Allan Mallard turning to start

Being able to bend my mini Kelton Hollowers helped remembering to get the shavings out every couple of seconds was a trick

turning cross grain helped as the scraping action chipped out small pieces

Then with a sharpen of the tool I manged to get a very smooth finish inside

Important as this may well be kept to go into the Royal Easter show and the judges will have torches and mirrors out

Well I better get out and finish the Waka I am making

Thanks again for taking the time to comment

Re: Starfish from under the Jordons tree

#15

Really cool

Mike Foster

Another great piece Terry. Love the colors and texture. What an imagination!

Mike

Re: Starfish from under the Jordons tree

#16

karl jr

Transcendence

karl jr

Terry,

your turning always amazes me. I barely feel adequite to respond to your works. IMHO you've transcended your media. The air up there must be pretty thin, seeing as so few people achieve that level.

Sorry that that sounds like pandering, but it's all true.

KTK

Re: Starfish from under the Jordons tree

#17

Leo Cuellar

Absolutely flummoxed at how...

Leo Cuellar

you manage to keep surpassing yourself!!! You have an amazing and rare talent Terry. Thank you for sharing another superb work with us.

Leo

Re: Starfish from under the Jordons tree

#18

Re: Transcendence What?

Terry Scott

Hell Karl that was a bit deep mate I just spent the night searching on Google trying to find out what it meant L.ol

Oh and I live down under

Seriously thanks for making my day