Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Ryobi recipro carver questions

Posts

Re: Ryobi recipro carver questions

#26

Re: If You're Looking to Move Serious Wood

Donna Banfield

No Mark, I would never attempt to carve someting that large using just hand tools and a mallet. I would start with my chainsaw and carving bar with the dime tip. As a tool junkie, I would love to have a few of those chisels. But as someone with a cap on the $$ that I can spend on my tools, I have to be able justify the expense. I can see me making something that size MAYBE once a year.

It's just like the 20" plus bowls. Yes, they're cool to say you've made one, but try to find a market for that size. You've now narrowed your potential buyer to about 5% of the wood bowl buyer market. But if there suddenly is an increased interest in the purchase of large wood sculpture..... maybe.... :^)

Re: Ryobi recipro carver questions

#27

Re: If You're Looking to Move Serious Wood

Donna Banfield

You do beautiful work, Betty.

I have the arbortech mini grinder with the carbide disc. I have considered the arbortech reciprocating carver, but have read at last one review that a plastic part near where the chisels are fixed to the machine didn't hold up as well as expected. This surprised me, as I've been pleased with the mini grinder and thought is very well made.

I will likely go with the Automach, because all the reviews I've read about this machine have been postive.

Re: Ryobi recipro carver questions

#28

Re: If You're Looking to Move Serious Wood

John Jordan

I love that walnut detail, I don't care what you carved it with. :) Fabulous.

FWIW, I've worn out two Automachs. I use a Ryobi for a certain texture mostly, but take two or three to classes with me, and they work fine-better than a Wecheer or Proxxon. I wished they still made the Ryobi-they were a good value for people to start. I still have a couple of new ones, and even have a european/japanese 220 volt version for traveling. :)

Using multiple tools means not having to change cutters, and you can alternate if carving a lot to prevent overheating.

John

Re: Ryobi recipro carver questions

#29

Ha!

Mark Mandell - Gone Round In Jersey

Sell? As in Making Money (let alone a living) at this? :D

Certainly you jest ;)

Funny though, when I was carving by hand-power, I figured I needed any number of shapes and sizes of chisels. When I went to the air-power, I found my No. 7s were my favorites, especially the 25mm. I could move more wood with way more control with that tool than any other.

BTW T&H makes a "bantam" size reciprocating tool, but I'd think you would have some issues with getting your chisels to fit. They have an 800 tell [ 800-451-4349 ] so it might be worth it for more information.

Size Matters? "See, Mom, I made this Big Thing!" "Great, now all I have to do is figure out where I'm going to store it until you grow up." :D

Re: Ryobi recipro carver questions

#30

Betty Scarpino

Re: Ha! Sell it!

Betty Scarpino

Well, Mark, you SELL it, as in make money as an artist!

Thanks, Donna and John, for the kinds word. When I first started carving, I used a mallet and carving tools. I wanted to be a "purest." That lasted for just one sculpture, then like John said, it doesn't matter what I use to remove the wood! Anything is fair game. I've been known to power sand with 60-grit discs.

Mark, that sculpture of yours looks like stone! What did you finish it with? Must have been a huge log.

Re: Ryobi recipro carver questions

#31

Finish

Mark Mandell - Gone Round In Jersey

The exterior was a filled-pore high gloss poly, buffed with auto compound. The "interior" surfaces were given a couple of applications of Danish oil and a bit Briwax to just preserve the chisel polish in the cuts.

Log was a bit over 6 feet by something like 30+" in diameter (chain hoists are our friends). Carved in a "V" cradle. Miraculously, nobody's reproductive system was harmed during production. ;)

Went to a collector in Florida. [In a LARGE crate]