Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

my last micro goblets

Posts

Re: my last micro goblets

#26

Vince, send him enough....

Barry Irby

to sand ONE free. Whats it going to cost you? And when John gets famous you could advertise, "Sandpaper provided by Vince for Famous John's Creations." Send him a piece the size of a postage stamp. Most of it just to hold on to.

Or better yet, make up a mini random orbital unit he could use in a dentist's drill. Yeah, that's the ticket.

Re: my last micro goblets

#28

Re: Vince, send him enough....

John Lucas

I sanded the yellow heart ones with 1200 grit. Actually just a light touch on the edges to soften the corners. 600 was way too course and left lines. 1200 barely did anything but did soften the transition between tool marks.

Re: my last micro goblets

#29

Ellis Walentine

But the real question is...

Ellis Walentine

... what power magnifying visor were you wearing to turn these?

Ellis

Re: my last micro goblets

#30

Re: But the real question is...

Bob Macgregor

BYOB when you visit John, if you don't want to come away thirsty; he serves really small portions of wine to his guests.

BOB

Re: my last micro goblets

#31

Re: Vince, send him enough....

Vince Welch

Im sending you out a peice of 800 grit John!!! That should take care of it!

Vince

www.vinceswoodnwonders.com

Re: my last micro goblets

#33

Re: But the real question is...

John Lucas

Ellis to answer your question it's a 20 power stereo microscope. When doing the captured ring goblets the whole goblet just barely fills the viewing frame. On the 1/4" goblet you don't get all the goblet in there at one time which is why I had to rig up such an elaborate way to mount the microscope. I have to move it way to the right to be able to hollow the goblet and then back left to turn it.

depth of field is so shallow that I can't get the stem and outer edge of the bowl in focus at the same time. That's less than 2mm depth.