Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Working on new mini goblets

Posts

Working on new mini goblets

#1

Working on new mini goblets

john lucas

I think I've outdone myself. I've made an ebony goblet so small I don't know how I'm going to photograph it. It's approximately .013 wide and maybe .030 or so tall. It has better shape than any of my small goblets. I'll try to shoot it early next week.

Here is a shot of my new micro tools. The big ones are .025" the medium ones are .015" and the small ones are .010" except for the captured ring tool which is tapered from .080 down to almost nothing and has a burr on the end that does the cutting. The tool on the far right is the ring cutting tool and the one next to it is a skew. I[m really proud of the tools and wish I could photograph the points. They really do have bevels and look just like a big skew.



I decided to see how small I can go on the captured ring goblet. This is the first one. I don't know if I can go much smaller and still get a loose ring. We'll see. I'll try tomorrow.


Re: Working on new mini goblets

#2

Re: Working on new mini goblets

Ted Evans

I like miniatures John but these are absurd, and didn't your mother tell you that you would go blind playing with those things?

Any chance you will be bringing them to the meeting this month in Crossville? I would really enjoy seeing the macro miniatures as well as the tools.

I do not know how you can pull it off but it is amazing. You are not playing games with Photoshop, are you?

Ted

Re: Working on new mini goblets

#3

Only one ring on the mini goblet?;-)

adrien Coblentz

Re: Working on new mini goblets

#4

Re: Working on new mini goblets

john lucas

Ted I will miss the meeting this month. I'm taking a class at John C Campbell. I will have them at the next meeting. I'll have to find out when that is. The meetings usually get messed up by Thanksgiving.

As the joke goes, you'll go blind doing that, well can I do it until I need glasses. :)

If you knew how bad I was a photo shop you wouldn't even ask the other question. I can size and retouch spots. That's about the limit of my skills.

Re: Working on new mini goblets

#5

Don't temp me-the microscopes still set up

john lucas

Re: Working on new mini goblets

#6

Steven Antonucci

Any smaller and it would be called fission...

Steven Antonucci

Re: Working on new mini goblets

#7

I need some Nano robots

john lucas

Re: Working on new mini goblets

#8

mini captured ring

john lucas

I'm taking a break from trying to turn a smaller captured ring goblet. I've broken 2 of them now. I've tweaked my mini skew to cut down on the vibration by shortening the shaft. I've turned a new goblet head and started the ring. So far so good but I was getting shaky so it's time to break for lunch. I saved one of the mini rings just to give you an idea of how small I'm working. Still frustrated over my new camera's capabilities. This would have been easy to shoot with my old film cameras. None of my macro attachments work properly with the new gear. The only way I could get it this big was to crop the hell out of the image.

Re: Working on new mini goblets

#9

Chuck Jones - West TN

So this is what you used the big log for?

Chuck Jones - West TN

Re: Working on new mini goblets

#10

Yea- I just grabbed some curls from the chain saw 

john lucas