Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

cutting a large log

Posts

cutting a large log

#1

cutting a large log

john lucas

I'm trying something I've never tried. I want to cut a couple of platters as large as I can. I cut 2 flat sides although I kind of wish I had cut them parallel. Then I rolled the log on it's side using a chain and my truck. I cut some lines about an inch or more on each side of the pith. Now all I have to do is cut all the way through.

That will be the challenging task. This log is 34" on the narrow end and over 40 on the long end. I only have a 20" bar. I'm hoping it will be less than 40" thick 20 inches from each end. If it isn't it's going to be really interesting.

It will also be interesting connecting the cuts when I flip the log 180 degrees to cut in from the other side. I'm sharpening the blade often so that I can keep the cut as straight as I can.

Re: cutting a large log

#2

photo below

john lucas


Re: cutting a large log

#3

Re: photo below

bill Crommett

John: You may have to use a wedge for the final cut.

Re: cutting a large log

#4

Re: photo below

Ted Evans

John, I have a Husky 281 XP with a 30" bar that you are welcome to use if you like. If I can be of any assistance to you, I would be glad to bring it over and help.

Ted

931 788 5168

Re: cutting a large log

#5

Chuck Jones - West TN

This is what you need

Chuck Jones - West TN


Give Joel a call. He might swing by and help you. Memphis isn't that far when it comes to a nice log like that. :D

Re: cutting a large log

#6

Re: photo below

john lucas

I appreciate it. I have two friends locally who have really large saws if I really need one. MY friend who does rocking horses has a 5 foot bar on one of his.

Re: cutting a large log

#7

Re: This is what you need

john lucas

Chuck That looks like my friends saw only it's smaller. Russ Jacobohn has 5 foot bar. I may just go out and buy the 2 man buck saw I saw the other day. It was at least 6 foot long. Of course finding someone dumb enough to man the other end would be tough.

Re: cutting a large log

#8

This is so much easier

TomCollins

Sets up over the log, cuts any thickness, safer and makes parallel cuts with ease. It is a Lucas mill with slabbing attachment. $15 large will put one in your garage!


TomC

Re: cutting a large log

#9

I want one of those

Mike Foster

Re: cutting a large log

#10

Re: This is so much easier

john lucas

Tom Somewhere I saved plans for a bandsaw mill made from over inflated tires. It ran on a guide similar to that one and you just pushed it through the cut. The one I saw had no guards whatsoever and looked like it would cut a man in half in a heartbeat. I will put guards on mine. I believe I can build one for a few hundred dollars. If I ever have enough property to store something like that I'll build it in a heart beat. My biggest problem is moving logs like this.

Re: cutting a large log

#11

John, I talk to so many people

TomCollins

who want to buy a bandsaw mill and let the good times roll. They don't realize the big equipment needed to manhandle such logs safely. Good luck on getting yours sawn. I hope you can get some parallel cuts. My saw delights in defying my intentions of where I want to cut.

TomC

Re: cutting a large log

#12

Lyle Jamieson

Re: photo below

Lyle Jamieson

No problem, I do it all the time. You have the right idea about the sharp chain. The trick is to start off in the right direction so start slowly. After that, keep the curf clean so you can see down to the bar. Lift the chain out often to clean out the shavings. Close one eye and sight down into the curf and line one cut with the other and alternate back and forth from one 20 inch cut to the other 20 inch cut on the other end. Of course always go into the side grain. I wish I had a pirates eye patch cause my face gets tired keeping one eye closed for long periods of time. Go all the way through the log so when you turn it upside down you only have a couple inches left to cut from the back side. Dont try to meet in the middle.

Re: cutting a large log

#13

Steven Antonucci

Amen to that!

Steven Antonucci

I always wanted to cut my own lumber until I actually started doing field work. Logs of a certain size are a lot less attractive if you have to move them, and even moreso if you have to move them from the site before you can work on them.

I completely agree that someone could make something like this very inexpensively, but the best idea is to spend a day slabbing a big log with someone @ .50/bf...

S

Re: cutting a large log

#14

Chuck Jones - West TN

Not a problem

Chuck Jones - West TN


Re: cutting a large log

#15

Chuck Jones - West TN

"50 cents a BF? You're kidding...

Chuck Jones - West TN

It's always interesting to notice the difference in cost of things depending on where you are.

I've always heard "The price of firewood depends on where it is and where you are." Same for sawing I suppose. I only saw for friends and neighbors when I can't move fast enough to avoid them, but I get 25 cents BF, if they help.

I used to live in NJ (and love the place) so I'm not completely shocked at the COL differences. Sawing turning stock does qualify as a cost of living item, doesn't it?

Re: cutting a large log

#16

Steven Antonucci

I haven't priced it in a while

Steven Antonucci

but I think it was .40/BF last time I asked, and that was 10 years ago or more... so I'd guess it's close?

I joined a turning club and we have a sawyer. I can ask him what he gets. As for me, a Stihl is close enough when the wood is free :)

S

Re: cutting a large log

#17

Google Logosol

charliel belden

They've got a set up that goes on your chain saw (at least on a Stihl). 2x4s as fist cut guides, top of that cut for the rest.

For stuff wider than your bar, but no wider than about 1 1/2 times your bar, cut part way through, wedge the kerf and come back on the other side - wedging behind the kerp as you go so you don't pinch your bar.

Regular bars and chains are designed for cross cutting. You want a Rip bar and a Rip chain. Thinner kerf and teeth ground for ripping rather than cross cutting.

Under $200, assuming you already have the chain saw - it's very portable - meaning you can do your cutting in the field - and leave the sawdust and what you don't use - in the field. Carry out just the stuff you want - and will use.

Re: cutting a large log

#18

Must have bigger chainsaw.

john lucas

Based on my current progress, you would need a much heavier duty chainsaw and way more aggressive chain to slab logs with this or the Alaskan Chain saw mill. I'm half way through the log, maybe more if you count cutting down the ends. I've used 4 tanks of gas, sharpened the chain about 6 times and spend about 2 hours doing all of the above.

I just flipped the log 180 with the truck. Of course now there is a big spike stuck in the log. I could not get the chain all the way around the log. My son and I were able to lay it down but simply couldn't flip it on up. My pry bar just digs into the gravel driveway. I drove a spike in the log through the chain which held it in place long enough to roll the log with the chain over the top.

I'll cut some more tomorrow and hopefully split the log. With the 2 cuts that I've made I will only have accomplished splitting the log and cutting the heart out of it. I will get some smaller platter blanks when I cut the pith out of these. I figure I've got about 4 to 6 more hours in this. Damn hope I don't get a lot of checks in the blank as it's drying.

Re: cutting a large log

#19

Re: Must have bigger chainsaw.

Paul Zerjay

What do ya figure those blanks are costing you before you even get 'em on the lathe?

Re: cutting a large log

#20

Does a Chevy Astro count as large equipment?

Dick Coers

That was the largest piece of equipment I had with my Baker manual bandsaw mill. I had a huge advantage though, the logs were sitting in an urban recycling lot when I got to them. I cut logs up to 34" dia. I would park the Astro on the side of the mill, and wrap a chain around the log to the van. A come-a-long would pull the log up the mill ramps. That first turn of the log was the tough part. I once snapped the 3" hard maple handle of my peavy. Needed a chiropractor after that day. Loading a wet 2x24x96 in the van wasn't a treat either. The funny part to me was that I would never have loaded a log into that van, but I gladly did it one board at a time. Now my newer 2002 Astro is not near the truck my 1995 was. I couldn't load this one that hard.

Re: cutting a large log

#21

What's a blank like that worth

john lucas

I don't know where to buy a blank 30" in diameter by 2 1/2" thick. That of course assumes I achieve the final blanks. I'm hoping for at least 2 large blanks and maybe a couple more. If I'm able to complete the project it will be worth many many times the labor I will be putting in to get these blanks.

Re: cutting a large log

#22

Re: Must have bigger chainsaw.

Jeff Rich

I cut open 2 large maple logs like that, both about 28" thick and about 48" diameter.

I used my trusty ol Stihl 041 with a skip tooth chain and it took about 10 or 15 mins to cut through the middle.

Now, this was a freshly cut silver maple....