Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Vacuum adapter

Posts

Vacuum adapter

#1

Dick Hines

Vacuum adapter

Dick Hines

I just took delivery of my new vacuum adapter. I got it from JT Turning Tools, LLC.

It is sweet. I redid my vacuum system this afternoon but have not turned anything I need to use it on yet. The adapers sure is better than the all thread rod I was useing. It looks kind of like a bottle stopper. It fits into the hand wheel and has two "O" rings to keep it from leaking.

Just a happy turner.

Re: Vacuum adapter

#2

Re: Vacuum adapter

Mike Foster

I have, and love, the same adapter for My American Beauty. The Oneway adapter does not work with the Robust. I really like the fact that it is so quick and easy to install. I only have it in place while I'm using it. Frees up the chance to use a knockout bar if needed.

Mike

Re: Vacuum adapter

#4

Alan Zenreich

Re: Vacuum adapter

Alan Zenreich

Dick,

I recently installed a vacuum setup from JT Turning Tools on my Nova lathe.

You might find some of my installation details useful. Photos and text are on one of my web pages: http://www.zenreich.com/ZenWeb/shop/vacuum_chuck.htm


img

Re: Vacuum adapter

#5

Vacuum pump setup idea *LINK*

Rich Pearson in Mill Creek, WA

I am also a happy customer of JT Turning Tools. Tom Styer did a custom hand wheel for my Jet 1236 to fit his vacuum adapter. A sweet set up, soon to be added to his line of products.

I used the setup tutorial at: http://www.jtturningtools.com/files/BUILDVACSYS.pdf

as a guide, including adding an air filter (Air Filter #4-1565) and silencer (# 4-1304 ) obtained from Surplus Center (www.surpluscenter.com) to the OUTPUT line of my Gast pump.

This decreased the noise from the pump by about 75% ... Well worth the minimal cost of the parts.

If you have a noisy pump, you might want to give this a try.


Vacuum system set-up tutorial

Re: Vacuum adapter

#6

Re: Vacuum adapter

Joe Herrmann

Thanks for the information in this post. I've been wanting to put together a vacuum system but haven't gotten around to it so the info is good news, especially about the adapter.

thanks again

Joe

Re: Vacuum adapter

#7

Dick Hines

Re: Vacuum adapter

Dick Hines

Alan and Joe I am not new to vacuum chucking. Have been useing one for over a year. The adapter is a great inprovement over the all thread rod I was useing though.

The filters on the out put side of the pump does sure make a difference.

Re: Vacuum adapter

#8

Dick Hines

Re: Vacuum pump setup idea

Dick Hines

Rich, I used some of the ideas when I built my system. I will print this out incase someone in my club needs it when building a vacuum system.

Thanks

Re: Vacuum adapter

#9

Don Geiger

Re: Vacuum pump setup idea

Don Geiger

I purchased a JT vacuum adapter while I was at the Texas SWAT. It is very cool. I won't fit my Stubby, but it will fit my new Robust American Beauty (due to arrive in early November)!!

Don Geiger