Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Waste Block vs Glue Block?? (vote)

Posts

Re: Waste Block vs Glue Block?? (vote)

#26

A

Barbara Gill

Re: Waste Block vs Glue Block?? (vote)

#27

Re: Waste Block vs Glue Block??  (vote)

Jorge Casta�eda

c

although they are basically waste wood, I call them glue blocks when used in a faceplate like I do with platters and sometimes with blocks too, one mount affords me access to both sides, so it save me time, then I use the parting tool to make a grove and separate the work from the glue block with a japanese saw.

The work piece goes to the vacuum chuck to clean and finish the bottom, the waste block get trued, and it is ready for next. Eventually it gets thin and I just add more wood.

To clarify, my glue block is actually a two part, the part next to the face plate, is usually oak that holds screws very well, to this I glue a second block that is the one that gets wasted, the one with the screws is quite permanent.

This arrangement also makes a little more space to work.

Re: Waste Block vs Glue Block?? (vote)

#28

Re: Hijack - type of wood?

Carol Reed

Alder or poplar for me.

Re: Waste Block vs Glue Block?? (vote)

#29

Making a Woodturning Dictionary Doc?

Wally Dickerman in Arizona

Re: Waste Block vs Glue Block?? (vote)

#30

A

keith zimmerman, Normal IL

Re: Waste Block vs Glue Block?? (vote)

#31

Thank you, thank you, . . .

Doc Green

Before this thread gets buried, Thanks to everyone who responded. The additional comments shed a lot of light (different thread?) on the many different ways that turners approach the same objective.

Now, what the deal is . . . I'm working on a how-to piece that I hope to get published someday, maybe, and it's always good to know how people refer to various things before you throw a big word out there. Web searches revealed that a lot of turners use "waste block" and "glue block" to mean the same thing. Others make the distinction based on whether the block is used again, glue blocks being reusable. And that is exactly what your responses confirmed.

When I first started learning about turning, I was not clear on the meaning of "spigot." I erroneously concluded that it was a recess. I looked it up in the dictionary: "a thing on the side of the house that water comes out of." Finally, somebody told me it was a tenon. Herrrumph. I was a little disappointed.

Thanks again!

~Doc

Re: Waste Block vs Glue Block?? (vote)

#32

Re: Waste Block vs Glue Block??  (vote)

Harry in Beautiful Downtown Kulpsville

Different names for the same thing.

Re: Waste Block vs Glue Block?? (vote)

#33

D, a glue block is a waste block but not...

Craig Daymon

...the other way around.

I see either one as a scrap of wood used for some disposable purpose.

The difference being that a glue block is a waste block where glue has been (or will be) applied. A waste block does not necessarily require glue.

I would consider a block of wood that I turn into a cup or jam chuck to be a waste block, but as I would apply no glue to it, it is not a glue block.

This is a case of inheritance. Like a car and a truck are specific types of vehicles, a car is not a truck. Both are waste blocks (vehicles), but the glue block is a special case of a waste block.

Re: Waste Block vs Glue Block?? (vote)

#34

Re: Waste Block vs Glue Block??  (vote)

Sam Scalzo

I would say A

Sam