Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Skews

Posts

Skews

#1

Skews

Paul Zerjay

>When it comes to turning spindles, the skew has become my tool of choice. This past spring I bought a couple of Lacer's skews and have grown to appreciate a thick, heavy tool. The problem is, if you want something heavy, like Lacer's, you can't find anything smaller than a 1/2". Turning all these Christmas ornaments has me wanting something smaller like a 1/4". Since these finials are small and delicate, it doesn't have to be super heavy, but I sure don't want something so flat and cheesy that I'm gonna get a lot of vibration. I have used a round bar (old skewchigouge) to fashion a 3-point tool that I use for dovetailing tenons. I'm thinking this is the way I want to go, so I guess I'm stuck making my own and will work from trial and error, unless someone has a better idea.

Re: Skews

#2

Re: Skews

Harry In beautiful downtown Kulpsville

>Bob Rosand will sell you a 1/4" round skew foe $20. I got one of these several years ago and didn't like it. Lately I've been using it for finials, icycles and lace bobbins. I find it works great for those little details.

Re: Skews

#3

Bonnie Klein Skew

Dave Staeheli

>I still reach for my Bonnie Klein skew when turning small beads if I can get in close enough. I think it is still available from Craft Supplies. If you want it to resemble a Lacer skew as I did, you have to do a bit of grinding and filing. I think it is 7/16". And if Glaser Hitec can ever get its act together, Bonnie designed a set called the Mini-G which ought to be phenominal.

Re: Skews

#4

Re: Skews

john lucas

>I have the Bob Rosand 1/4" skew and love it. I turn lots and lots of ornaments. My favorite however is my homemade skew made from a 3/8" spade bit. It has a 1/4" shank. I cut off the tip and ground it like a skew. The cutting edge is about 1/2" long. The round shank makes it very easy to roll beads and cut "flying saucer" shaped details using the toe.

Re: Skews

#5

Re: Skews

eliot d------WebKitFormBoundaryu+MBDi+0MX0Pf5O9---

>Believe it or not, my "go-to" small skew is a practically free one from HF. ( I think I paid something like $2.) Yes, it's made in China; but it does say High Speed Steel. Anyway, I sharpen and hone it carefully, and it works like a charm. For fine work you don't need anything particularly heavy.

Re: Skews

#6

Re: Skews *LINK*

charlie belden

>Got a 1/4" bench chisel? A 25 degree single bevel edge this size can get you into pretty tight spaces. You can "rub" either the flat back or the bevel to control the cut. Works like a bedan - only thinner. Assuming you don't need a long reach it works pretty well with a little practice. Not too good for long rolling cuts - but for tight space cuts - it works pretty well - as you can see in the pieces on the attached web page


Bench Chisel as a Bedan/Single Bevel Skew

Re: Skews

#7

Re: Skews

Curt Fuller

>My favorite skew for doing small spindle work is a home made 1/4" made from 1/4" round drill rod. I just ground the end on an angle to flatten it out and then grind the cutting edge from that. The round rod seems to give is some fairly good stability and lets it roll easily and the small cutting surface lets you get in to some tight places.

Re: Skews

#8

Re: Skews

john lucas

>I have one of those and use it quite often. I paid $5 for a kit of 4 tools. 2 of them are really nice. The other two were almost useless.

Re: Skews

#9

Re: Skews

John K Jordan

>Paul,

My favorite tool is a 1/2" skew and I have some from several makers. The latest I bought from Thompson Tools - very good steel and plenty tough.

I use two smaller made from round rods: a 3/8" and a 1/4". I made the 1/4" from a piece of HSS rod I got from Ed Moore. Ed will sell a complete skew made from these already in a handle, but I don't find it very useful because it's too long and too flexible. I seldom need more than 3" of shaft. On advice from Frank Penta, I mounted mine in a short handle with set screws so I can adjust how much of the shaft is exposed.

I made the 3/8" round skew from a 3/8" piece of the same steel that Doug Thompson uses in his other tools. I think he sells the blank for about $20. (These rods are great for making small negative-rake scrapers as well.)

I bought a set of Sorby (I think) mini turning tools once and it has a 1/4" skew made from a flat (square, I think) stock. I don't like it at all and I never use it.

JKJ

Re: Skews

#10

Re: Skews

Paul Zerjay

>Thanks for all the responses guys. I think I'll give Bob Rosand a try. You can't beat the price and I really don't care for tool making myself.

Re: Skews

#11

Re: Bonnie Klein Skew

Scott Greaves in Blackfoot Idaho

>Just an aside - I have a set of the Glaser Mini-G tools, and they are great! I'm working on a review of them, but until then you'll have to believe me that they are as nice as you'd expect them to be, considering they have the Glaser name attached. They are a steep purchase, but if you can get in touch with Paulo, he can probably get a set together for you.

Scott.

Re: Skews

#12

Roger in MO

Re: Skews

Roger in MO

>John, I made one from a 3/8 spade bit yesterday. Thanks for the idea. I may learn to use a skew yet!

Roger in MO