Not all jigsaw mats are compatible
Chuck Jones
>Watch out for the jigsaw mats. We've bought them from a couple places and they are not compatible... the interlocking edges are different.
Knowledge You Can Build On — Est. 1998
Not all jigsaw mats are compatible
Chuck Jones
>Watch out for the jigsaw mats. We've bought them from a couple places and they are not compatible... the interlocking edges are different.
Re: fatigue mat?
waltc
>Yep, I use 'em.
I picked up a package of 2'x2' spongey play mats from Sam's club. As I remember, there were 10 of them, for around $15 to $20. Very reasonable.
They intelock, have finished edge pieces, and have worked well for 3 years. the surface is smooth enough so that it sweeps off well. If I wanted to, I could have red, yellow and blue floor mats, but I prefer the black back.
I also use insoles and wear tennies, usually. No foot problems, and I have had some in the past.
Walt C
Re: tools rolling off the lathe bed
Chuck Jones
>John,
I whipped up one of those little shelves today. Based on pleasure per minute and dollar spent, that may be the best investment I've made in my whole workshop. Aggravates me that I didn't think of it before. Thanks for sharing the idea.
Re: tools rolling off the lathe bed
GalenV
>John
I'll make one but use different dimensions, wood and type of carpet to get around your patent. :-)
Should be better than laying them on the work bench beside me and getting them lost in the collection there!
Wait, maybe if I just clean house.....
Galen
I have one
Carole Valentine
>Almost exactly like that, but I Just don't use it..seemed to get in my way more often than not. I made a rolling rack that sits just off to my right, so tools don't get put on the bed as often now.
Re: I have one
John K Jordan
>It does get in the way when sliding the tailstock way back, but I guess I've just gotten used to picking it up, tools and all, and setting it on the other side of the tailstock.
This little tray has also saved me from knocking things like allen wrenches and small cabinet scrapers into the tubs that collect shavings under the lathe.
JKJ