Re: LOL!!
Allen Neighbors
>
Knowledge You Can Build On — Est. 1998
Re: LOL!!
Allen Neighbors
>
Re: Making Tools: Brass 360 Follow-up Part 1
RonZ
>SWEET!
my stronghold-NO..my talon- YES
robert davis
>
Al, my Oneway jumbo jaws fit my...
Steve Kubien
>SuperNova2 chuck, as well as my Nova midi. I do not have a Stronghold chuck. If I am not mistaken, the main difference between Oneway jaws and Nova jaws (regular jaws, not jumbo's) is that the Oneways do not require a dovetail to hold a blank whereas the Nova's do.
Cheers,
Steve Kubien
Re: Dougie...
Doug Thompson near Cleveland
>I can find them for a song but shipping is a killer. California has a lot of used equipment for sale, it might be worth a look.
What about a wrapped gripping surface?
david
>Not necessarily a padded bar like Rolly Munro, but what about those aftermarket grip wraps that they sell for tennis racket handles?
David... I looked at several
dwr
>grips but could not find a slip on with the right diameter. These are "long and strong" for big 36" and larger) turnings. I like the idea of a wrap....:)
Dave
Re: Making Tools: Brass 360 Follow-up Part 1
The MountainMan
>Don't get sticker shock when you go to buy the lead shot!!! The price for a 25# bag is near $40-45 dollars these days!! I shoot lots of trap and do my own shotgun shell re-loading - used to be cheaper than buying commercial ammo!!
Regards
The MountainMan
Great presentation with photos!!
Re: Check with your local tire dealer ...
Jamie Donaldson
>........and see if he will give you some old used tire weights. Chop them into useable bits with a hatchet(hand ax) and load them into your tool handles- the price is right, and they won't run all over the place like shot when trying to escape!
Yeah... I got a 10#...
dwr
>... bag for $20!
Sand from the Borg is looking real good about now... or "free" from the coast is even better, but not headed there for a long while...
My old green lathe in the pictures is on a four leg stand made from well casings and filled with sand...
Might save the shot for the smaller handles after I test it in one of the big handles... anything to save the wear and tear on my joints these days.
Thanks Jamie...
dwr
>... that bears some looking into. My little brother has some connections along those lines, as well as his own shop, so I suspect I can get a bunch for free... always a good price!
Re: David... I looked at several
Ed Karch
>Try electrical heat shrink tubing. We use the big stuff on aluminum telescope struts to keep your hand from freezing to it in the cold.
Great idea!
dwr
>