Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Calif. Buckeye Vessel

Posts

Calif. Buckeye Vessel

#1

Calif. Buckeye Vessel

Bill Clark

>This is another piece in my California Buckeye series. This vessel is 7 �� in diameter and 4 � � tall. The entry hole is 1 5/8�. The piece has a �disappearing� base and sits on a 1 �� turned flat spot on the bottom. The walls are 3/16� thick. It is finished with 2 coats of shellac to seal the soft wood, then 3 coats of satin MinWax Wipe-On Poly. The vessel is also sanded and finished on the inside. The blank for this piece was taken from a much larger Buckeye root ball. It�s been very interesting watching the differences in figure and color display themselves as each piece is turned. It�s like opening a series of surprise packages and not knowing what to expect inside.

All comments/critiques welcome.


img

Re: Calif. Buckeye Vessel

#2

Re: Calif. Buckeye Vessel

Bill Clark

>This is the top of my California Buckeye Vessel. The figure was so interesting I wanted to include a photo showing it from another angle. Information about the piece is included with the previous photo.

All comments/critiques welcome.


img

Re: Calif. Buckeye Vessel

#3

Re: Calif. Buckeye Vessel

RevDoug

>Beautiful wood and workmanship. I love it. Others may disagree, but I like what you've done with this piece.

Turn 'em round,

Re: Calif. Buckeye Vessel

#4

Re: Calif. Buckeye Vessel

Bill Clark

>Thanks, RevDoug. Your comments are appreciated. I'm getting better at this as I go. I used a Don Pencil hollowing set up on this piece and really enjoy making hollow forms now that my confidence level is growing.

Re: Calif. Buckeye Vessel

#5

I'm in the RevDoug camp...

david

>Nice work. I also like the no base look.

Re: Calif. Buckeye Vessel

#6

Keith Tompkins

Re: Calif. Buckeye Vessel

keith tompkins

>Bill, that is one of the nicest collars I've seen in a long while. It makes the piece. :)

Re: Calif. Buckeye Vessel

#7

Re: An excellent job all around,....

Jamie Donaldson

>.. both the turning and photo are first rate!

Re: Calif. Buckeye Vessel

#8

Re: Calif. Buckeye Vessel

Bill Clark

>Thanks for the comments everyone. The collar is something I saw on someone else's work and used it on this piece for the first time. I liked the look of it so much I using slight variations of it on two other works in progress. As my experience grows and I'm not as concerned about making major turning errors I find myself spending more time on the form of my pieces.

Re: Calif. Buckeye Vessel

#9

Muy Bien!

Jorge Castaneda

>Me encanta,

Gracias por compartir

Jorge

Re: Calif. Buckeye Vessel

#10

Mike Stafford

Re: Calif. Buckeye Vessel

Mike Stafford

>A beautiful piece of wood turned and displayed beautifully. I love the integrated collar.

Re: Calif. Buckeye Vessel

#11

Re: Calif. Buckeye Vessel

Bill Clark

>Jorge and Mike, thanks for the nice comments.

Re: Calif. Buckeye Vessel

#12

Re: Calif. Buckeye Vessel

MIke from St. Clair Shores

>Nice job on a beautiful piece of wood.

Mike

Re: Calif. Buckeye Vessel

#13

Brad Vietje

Re: I'm in the RevDoug camp...

Brad Vietje

>I agree with RevDoug on all points but one -- I can't imagine anyone disagreeing ! I think its spot-on; nice use of wood great shape, excellent finish, and I like the collar and opening (about which I can be pretty picky).

Too bad these are so easy and take almost no time to learn that even unskilled beginners can make them -- can you make this on more than one axis ???.... OOPS !... That was my annoying evil twin Peter typing there...(see "The Case Against The Vessel", below, for details)... ;-)

Its as close to perfect as you're going to get, but I'll be glad to see what you do for an encore...very nice piece !

Safe spinning,

Brad Vietje

Newbury, VT

Re: Calif. Buckeye Vessel

#14

Re: Calif. Buckeye Vessel

Craig Daymon

>I like it a lot! Of course, it helps that it's buckeye burl. Everytime I see a piece of this stuff it makes me think of NASA photos of galaxy clusters. Really a neat wood. Someday I hope to buy a nice piece to turn myself.

This is a terrific looking piece. I really like it.

-Craig

Re: Calif. Buckeye Vessel

#15

Re: Calif. Buckeye Vessel

Bill Clark

>Yes Craig, you're right. The wood does make the piece. Without the figure and color the vessel would just be another turning with a nice collar. Of course this could be said of most pieces turned with beautiful wood. Each species of wood requires different turning techniques to bring out the beauty of the wood. Buckeye is very soft and tears almost like spalted wood. Fortunately I'm learning how to deal with it.

Like you I also see images in the wood. The "eyes" and figure in some of my pieces reminded me of Van Gogh's Starry Night.