Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Compressors

Posts

Compressors

#1

Compressors

Rick Davenport

>Just how handy is it to have a compressor?

I can see how it would help to use it to get all that pesky sawdust out of every nook and cranny of my bowls, but what else may/will/could/should I use it for?

There's one on sale at Harbor Freight for $99 less 20%

It's regular price is $179

Is it worth it?

Here is the product description:

8 GALLON , 115 PSI AIR COMPRESSOR

Powerful and portable, this workhorse supplies all the air you need for air tools. At this affordable price no home or workshop is complete without one.

2 horsepower motor (rated)

115 PSI maximum,

Air delivery: 5 SCFM @ 90 PSI; 6 SCFM @ 40 PSI

8 gallon tank capacity

Oil lubrication

120V, 60 Hz, 3360 RPM

Thanks for any and all opinions.

Rick

Re: Compressors

#2

Re: Compressors

Rick Allen

>Is a compresor worth having? Absolutley!! Mine is used every time I turnwood. Thi is usualy to clean sanding dust off the turning between grits and if that is all I ever used it for the compresor would be worth it.

I don't know anything about the HF compresor. Mine is a twin tank Hatachi that I have had for 10 years. In the next year I will be replacing the Hatachi with someing LARGE so I can do air powered sanding and run a sand blaster.

A compresor is a LOUD machine. Most loud machines you push a button or pull a triger to start the noise. The compresor comes on when it runs low on air presure. Not knowing when the compresor will make noise is something I have never become used to.

Re: Compressors

#3

Re: Compressors

don in central illinois

>I agree, Rick. Whenever my 4 year old granddaughter is in the shop with me, I unplug it. When it starts up, it scares the ????? out of her. I also use mine for blowing the dust off the sandpaper as I am sanding. Well worth the investment. Have no experience with HF tools.

Re: Compressors

#4

Re: Compressors

david

>Having a compressor for housekeeping and getting shavings out of a hollow form is one thing, but to use an air powered sander, it takes a large capacity compressor. Otherwise the motor will be cycling on every five seconds. I have used the small pancake type units for nailing guns and those are fine for that purpose, but for tools that draw air almost continuously, I would say that a 5-HP unit with a fairly large capacity tank would be most desirable. Like almost all things, a lot depends on what you intend to use it for. Because of the noise from the compressor motor, consideration should be given to isolating the unit in a remote location or in a separate room with sound insulation.

Re: Compressors

#5

Re: Compressors

don in central illinois

>Just a note regarding storing the tank in another location. Make sure, especially in winter, that when you bring cold air (from the compressor) into a warm environment (hopefully a warm environment) you can get some condensation that you won't want.

Re: Compressors

#6

Dick Hines

Re: Compressors

Dick Hines

>I use mine all the time. It is great for getting the ships out of hollow forms. 90 Lbs of air will clean out a hollow form in seconds.

Re: Compressors

#7

Re: Compressors

Mark Mandell - Gone Round In Jersey

>Rick,

Running tools like sanders and drills on an air compressor is rarely worth it. Compare the cost of electricity for the little motor in the corded tool with the cost the run some big honking "real 3 or 5 hp compressor, plus drag an airhose around behind you and those nifty air tools will be gathering dust on the back shelf in rather short order. Air tools are great in factories and such where monster compressors deliver many hundreds of CFM to workstations.

In addition, with air compressors you get what you pay for. I have a portable Thomas 2hp {4 gal. $280) that I use to run framing and nail guns and such. It's way too loud for the shop so my shop compressor is a real 3hp 12cfm Ingersol-Rand that sits in the garage well out of earshot. It runs my shop air applications including a Turbo Carver, blow gun, die grinder, touch-up spray gun, and fuel/air soldering torch, plus keeps all the car tires inflated and rotated properly.

Re: Compressors

#8

Re: Compressors

Mark Kauder, Phenix City, AL

>Rick,

I found that the Air Compressor is second only to my Dust Collector for usefullness, but is not necessary. They are noisy, and I even built an add-on room to my shop to put the DC and the AC. Aahhhhhh really nice. Just this week, I finished plumbing my shop with copper for the AC - no more dragging the hose from point to point.

If you decide to buy one - and $$$ are an issue, I would suggest that you check your local pawn shops. I bought mine at one for a little over $120 for a 30gal tank model.

Mark

Re: Compressors

#9

Re: Compressors

Doug Thompson near Cleveland

>OilLESS compressors are louder than units that run with oil. I have a 5 hp, 30 gallon that is enough for a small shop. We do know that the HP ratings aren't true but that's another topic. The 30 gallon tank does run a spray gun, a small Grec(sp) random orbital sander for short periods and fill the tires on the car.

I don't know anything about a HF compressor but they are nice to have around the shop.

Re: Compressors

#10

Re: Compressors

Barry Turner

>Air compressors are very handy to have around the shop. Blowing sawdust off turnings, blowing chips and shavings off the lathe, spraying finishes on turned items etc,

But, saying that "an 8-gallon workhorse will supply all the air you will ever need for air tools" is taking it just a bit far. No 8-gallon, 115 volt compressor is ever going to do that. It will power an air hose for blowing a bit of dust and shavings and maybe spray a bit of finish on small turnings through a touch-up gun or air brush.

It will NOT power an air sander, sand blaster or any other tools that require a lot of CFM's. If you want to pwer ALL air tools, plan on at least a 5 HP compressor with a 60-gallon tank or larger.

Re: Compressors

#11

Re: Compressors

Rick Davenport

>Thank you for the advice gentlemen.

From what I gather, I would use it just for dust cleanup and maybe some spray finishing.

Don't believe I will ever graduate into an array of air tools.

The noise factor seems an issue.

And Harbor Freight has never been known for its precision equipment.

You've helped me make a decision.

I've had my eye on a new Sweezey bowl gouge.

I think I might go for it.

The compressor can wait.

Thanks guys,

Rick

Re: Compressors

#12

I.........

W.C. Turner

>wouldn't be without one. They have more uses than you can shake a stick at!! Hey, I believe that needs to go into the "Old Sayings" thread, doesn't it?

Don't forget keeping the auto tires properly inflated so you can save that $4 a gallon gas!

I use it for everything, blowing out furnace filters, hairdryer filters, cleaning off the lawn mowers, inflating basketballs, air mattress', shall I continue?

What I'm trying to say is you'll never regret buying one.

Re: Compressors

#13

Re: Compressors

Mike from St. Clair Shores

>Rick,

I bought my wood shop 24 years ago, and it included an old 80 gallon cast iron compressor.

I use it everyday, Blowing sawdust from my lathe, out of hollow forms, running angle grinders, blowing my clothes off, nail guns, sprayers, powercrafter, etc., etc., etc. I often think what would I do if it quits running someday. Well, here's my solution. Others in this forum have spoken unfavorably about what I am about to say. My wife says that she thinks I am immoral about this, but here goes. Do you have a Costco in you area? They will take back anything for as long as you own it as long as you have your receipt. Do I think this is wrong? No, because it's their stated policy and one that helps to put all the little MA and Pa stores out of business. So they created it and I as a member use it. Plus theirs is better that HF.

Re: Compressors

#14

interesting

tek-Brunswick, Ohio

>Ia a ship in a hollow form, anything like a ship in a bottle? LOL ;)

Re: Compressors

#15

Dick Hines

Re: interesting

Dick Hines

>Should have been "CHIPS". The only thing you want to get out of a bottle before the ship goes in the rum.

Re: Compressors

#16

A few things to look for...

Peter Teubel

>Having a compressor is very handy. You'll find that you have more uses for it than you think right now. Here's are a few things to look for when deciding which one (IMO):

1) Ignore HP ratings...UTTERLY. They outright LIE about it. Peak HP means its the amount of power it will produce a split-second before total motor failure.

2) Oil-less compressors are much louder than splash-oil lubricated units (seperate motor and compressor head). They also don't last as long, but in an occasional use environment its not really an issue).

3) A larger tank means the compressor will cycle less frequently, all other things being equal.

4) Look at SCFM (standard cubic feet per minute) ratings. Look at the SCFM @90psi number because that's where most air tools will be operating. Compare that to the CFM requirements of the tools you might be using with it.

Personally, I have a Husky (from Lowes) 60 gallon 10.3 SCFM @90psi unit for my lathe shop and a 4 gallon oil-less Porter Cable 4.1 SCFM @90psi unit for portable work.

Re: Compressors

#17

Re: interesting/Dick Hines

W.C. Turner

><<<"It is great for getting the ships out of hollow forms.">>>

Dick,

You crack me up!! 8^)

Re: Compressors

#18

Re: A few things to look for...

Walter Ahlgrim

>The horsepower lies started as little built on each other to the point where horse power rating is worthless. Anyone with a brain the size of a pea knows the motor in that 28 pound shop vac is not really 6 horsepower. Just look at the skinny little 16 gage cord and you know there full stuff. They say it pulls 11 amps how many seconds before that 16 gage cord melts. Since its clear they will lie about horsepower and amps. Can you trust there SCFM ratings? How do you know when a liars is telling the truth? Just because they use the word standard?

Walt A