Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

for bowl turners *LINK*

Posts

for bowl turners *LINK*

#1

for bowl turners *LINK*

Phil Joines Krum, Texas

>If you follow the link it will lead you to the best drawings I've seen for utilizing logs to make bowls. It shows what a bowl would look like from different orientations. The drawings where used as a handout for a demo at the Dallas Area Woodturners but the demonstrator doesn't know where they originated. Has anyone seen them before?

From the DAW home page click on "Bowl Blanks from Log Handout".


http://www.dallaswoodturners.com/

Re: for bowl turners *LINK*

#2

Re: for bowl turners

adrien

>Indeed, very helpful....

Re: for bowl turners *LINK*

#3

Great stuff and great diagrams!!

david

>Wish I had these a couple of years ago. Going to laminate the sheets and keep them in a binder by my lathe. Never saw these before either. Thanks for the information!

Re: for bowl turners *LINK*

#4

Hey, thanks for posting this, Phil!

Eddie Pacheco, San Jose, Ca.

>

Re: for bowl turners *LINK*

#5

Re: for bowl turners

Allen Neighbors

>Just copied and saved it to my desktop. Will print it out and take it to my binder in my shop. This is what I've been wanting for a long time, I just didn't know it. Never saw anything like this before. Good stuff, Phil, thanks for posting this!

Allen

Re: for bowl turners *LINK*

#6

Re: for bowl turners

Mike from St. Clair Shores

>This is only a guess, but they look like drawings from a book I read a while ago. It was titled,"Turning Green Wood", by Michael O'Donnell. I'm not 100% sure, but I will check tomorrow when I go to my Wood Shop. In any case, it was well worth the read.

Re: for bowl turners *LINK*

#7

Re: for bowl turners

Phil Joines Krum, Texas

>Mike,

I just checked Mic's book. The drawings aren't from it but I had forgotten how good the book is. I think it�s the best one on the market as far as showing how to get the best use from the log. I�m going to read it again. His videos are well worth watching too.

Re: for bowl turners *LINK*

#8

Todd Hoyer

Dave Peebles Lyons, Ohio!

>Hi Phil,

I remember going to a demo by Todd Hoyer several years ago and these were the very diagrams he handed out. I do believe that he is the guy who created them. Either way, they are a great source of information.

Best wishes,

Dave

Re: for bowl turners *LINK*

#9

Re: Todd Hoyer

OB OBrien In Pensacola

>Yes they came from Todd Hoyer. I got one of his handouts at a symposium in Provo a couple of years ago. Called him and got permission to copy them if I gave him credit.

Re: for bowl turners *LINK*

#10

Thanks, really good info!

Bill Howatt

>