Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Tool cart Question?

Posts

Tool cart Question?

#1

Tool cart Question?

Barry Irby

>I have posted several questions about enlarging my shop and am still thinking about it. Having the small shop blues, one of the things I notice is that I am constantly moving my accessories around at the lathe. My drill press and bandsaw and portable planer which are nearby become tool holders, which is OK until I want to use one of them and then I have to shuffle that stuff around and then back again. Don't some of you have a tool or accessory cart you use with your lathe? I was thinking of moving the planer into the other room(its on wheels) and "replacing" it with a cart.

Can someone give my some guidance on what you have and what you like about it and how you might improve it? Have you seen one that you wish you had. What makes this work well? How about a receptacle on it for the power sanding stuff?

The "stand" for the planer is a base for a jointer, which I just happened to have. Any chance of chucking the stand and making a duel purpose cart that would serve both functions?

Re: Tool cart Question?

#2

JL

Re: Tool cart Question?

JL

>I don't have a cart. I have the Jet 1642 EVS. I adopted Dominic's plan for a ballast box. I built the box and suspended it between the two legs. I then built a drawer unit to fit on top of the ballast box. Long drawer for tools, short drawer for chucks and stuff. It keeps the lathe stuff more or less contained. The tools that I am using go on top of the drawer unit in the basket. After the new shop is built, I am going to try the PVC pipe vertical tool holder that someone posted a while back.


img

Re: Tool cart Question?

#3

Re: Tool cart Question?

Carole Valentine

>Hmmph...looks like the display in Woodcraft Store to me! Not a shaving or a spec of sawdust (or any dust for that matter) to be seen.

Barry, I use one of those Craftsman 5 drawer units on wheels. My workbench is to the left of my lathe and when I built it I put outlets in which are really handy. If I was to build a rolling storage cart, I would definitely wire it with outlets and a heavy extension on a reel.

Re: Tool cart Question?

#4

Carol, I have clutter vision......

Barry Irby

>I think like most men I have clutter vision, the inability to see clutter. JL must have one of those newfangled shop cameras that has a dust filter built in. A special lens that is something like a polarized or UV filter that allows for the taking of pictures without the dust showing. The Woodcraft store here has more dust than that. I wish my shop were even close to that clean.

I have a set of drawers under my lathe, actually six, on full extension rails and I keep a lot of my stuff in them, but the clutter abounds. (Drawers under or even near a lathe need to be on self closing runners. Even a small gap is sufficient to fill them up with sawdust.) My drill for sanding goes on my left, on the drill press table. My tool rest goes on the in-feed table for the planer when I switch to the post for the coring system. The tools I am using at the moment often find their way to the table for the bandsaw, to my right.

This may be a "habit of work" problem. Perhaps I just need a little more discipline about putting each item exactly where it belongs every time.

Re: Tool cart Question?

#5

Re: Tool cart Question?

John Lucas

>Barry I'll post of photo of mine tonight. I have a Craftsman rolling cart probably similar to Carole's I built a 2 level rack to hold a lot of my lathe tools. It rolls so I can move it if necessary.

Re: Tool cart Question?

#6

JL

Re: No dust filter..

JL

>The picture was taken after I had installed it. It's a lot messier now.

Re: Tool cart Question?

#7

Re: Tool cart Question?

Russ Fairfield

>This is the one I use. It is portable. The shelves slide out for access. There are no drawers to fill up with shavings. Any tools that won't fit are used so seldom that there is no need for ready access to thenm.


img

Re: Tool cart Question?

#8

Re: Tool cart Question?

Russell L. Babbitt Jr.

>I store my tools in a roll around cart from Costco. It also holds my grinder. With all the tools I have I must store my accessories in a wall cabinet. But there would be plenty of room in the cart if I wasn't so tool crazy.


img

Re: Tool cart Question?

#9

Very nice, Russ. Two quick questions:

david

>1) What is that you are soaking?

2) Don't you wish that all 4 casters were pivoting?

Re: Tool cart Question?

#10

Looks like my kitchen drawers, Russell ; -)

david

>

Re: Tool cart Question?

#11

You have to much time on your hands...

Ron in Drums PA

>You have to much time on your hands when you start labeling your drawers!

Re: Tool cart Question?

#12

Re: You have to much time on your hands...

John Lucas

>Ron It would be easy to label mine. Junk, More junk, Stuff, More Stuff etc.

Re: Tool cart Question?

#13

George Balock

Re: Tool cart Question?

George Balock

>Barry,

I have an old microwave cart to which I mounted an old cabinet drawer. My tools sit in a PVC pipe carousel, with the excess living below the drawer. I wish the casters were bigger, but the price was right--free.

George

Re: Tool cart Question?

#14

Re: Tool cart Question?

Ed Karch

>Mine is an aluminium meat rack with 9 stacked meat trays full of tools. It is also from Costco but out behind the store in the trash bin.

Re: Tool cart Question?

#15

Re: Very nice, Russ. Two quick questions:

Russ Fairfield

>2 quick answers.

1. Slip stones for sharpening tools are soaking in mineral Oil and kerosene.

2. No. It stays in one place better when only 2 wheels swivel.

Re: Tool cart Question?

#16

LOL

Ron in Drums PA

>

Re: Tool cart Question?

#17

Re: Tool cart Question?

Barry Irby

>You are (note the envy in my voice) tool crazy. A drawer that size labeled "Gouges". I would ask if you have a favorite, but it would be like asking a parent of twelve children to choose a favorite. Nice cart, thanks for posting.

Re: Tool cart Question?

#18

Thanks, Russ. Value your input.

david

>

Re: Tool cart Question?

#19

Dick Hines

Re: Tool cart Question?

Dick Hines

>How do you people get any work done? If my shop looked that clean my wife would think I had quite turning and gone to chaseing women.

Re: Tool cart Question?

#20

my tool cart

john lucas

>Here is my tool cart. It will undergoe some changes in the future. Mostly there will be storage bins inside the drawers to keep everything from rolling around. I may put a rack on the top to hold #2 morse taper accessories such as drill chucks, drive centers etc.


img

Re: Tool cart Question?

#21

Re: Tool cart Question?

Ian

>mine is shop built, 7 draws increasinging in size as they decend. top draws contain marking and layout tools, sanding tools, misc tool accesories, then chuck and jaws, then finishing supplies and lastly misc that I don't use often.

the top rack is made of made of pvc scrap and holds about 30 tools.

a couple of pics may help the discption.

IAN


img

Re: Tool cart Question?

#22

Re: You have to much time on your hands...

Russell L. Babbitt Jr.

>Absolutely right, too much time. Part of my reason for doing this is I hold our clubs "hands-on" meetings at my place. It keeps me from having to hand out tools myself every time somebody wants something. Now I just have to teach them to read.

Re: Tool cart Question?

#23

Re: Tool cart Question?

Russell L. Babbitt Jr.

>My favorite is my "next" tool.

Re: Tool cart Question?

#24

Re: Tool cart Question?

Ian

>lets try this again, IAN


img

Re: Tool cart Question?

#25

Re: Tool cart Question?

Ian

>second pic,


img