Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Carved Maple Bowl

Posts

Carved Maple Bowl

#1

Carved Maple Bowl

Jennifer@Indy.USA

>Here's another one that I finished up today. This is my second attempt at carving and while I think it's an improvement from the last....I have so much to learn it's not even funny. Carving is very humbling for me. I find it very difficult to know where to remove wood and where to make curves and stuff. I would love to take a carving class sometime. I thought I was done with this one when I brought it in this evening. Maybe I've been looking at it too close for too long...but after taking these photos, I feel like it needs something else? I don't know what though. It is a piece of maple about 8" diameter and 4" tall. Again I was using the BLO for wet sanding and so that's the finish it got. Can I put something over it? Both these pieces just feel flat or something? I like the depth they have though.




Well there ya go....that's what I've been doing in my shop the past week or so. Comments or ideas as to the thought of doing something more to it...or leaving it alone would be welcome :)

Thanks for looking.

Jen

Re: Carved Maple Bowl

#2

Re: Carved Maple Bowl

David

>Can't tell from the photos, but I think it would be neat if the "inside bowl" looked like it carried down to the base and the outside texture is replicated on the slightly raised base.

Re: Carved Maple Bowl

#3

Re: Carved Maple Bowl

Carol from AZ

>Ahhh!

Cleavage. That's what I'd name it.

I like it. And I usually do not care for 'thick' looking bowls.

Re: Carved Maple Bowl

#4

JL

Re: Carved Maple Bowl

JL

>Nice texturing job. I like the way the curves swirl towards the base.

Re: Carved Maple Bowl

#5

Re: Carved Maple Bowl

Terry Quiram, Roanoke Illinois

>Jen

More, more!!!! I like this one a lot.

Terry

Re: Carved Maple Bowl

#6

Re: Carved Maple Bowl

George Van in WI

>I like where you are going with this Jennifer. It gives potential to those roughed blanks that didn't turn out as I wished. The carved curve seems to flow well.

Re: Carved Maple Bowl

#7

Re: Carved Maple Bowl

Ed Kelle

>Hey this is great too, rough coming out of smooth. Can you still use your wipe on poly to add shine to the smooth and leave the rough as is? Might be a nice contrast. Keep having fun with these, they are super

Re: Carved Maple Bowl

#8

Re: Carved Maple Bowl

Carole Valentine

>Oooh...I like it Jen. You can certainly use additional finish over the BLO I would think. You might try Russ' mixture.

Re: Carved Maple Bowl

#9

Now THAT'S What I'm Talkin' About!

Thomas Skaggs, Foothills of Mount Level

>Jen,

What took you so long to do another carved piece? Fabulous! I say leave that traditional work in the dust and keep moving in this direction. This is your ticket to fame and fortune!

Tommy

Re: Carved Maple Bowl

#10

Re: Carved Maple Bowl

Jerry Whitaker

>Everything flows nice....I would not change a thing. Just get busy makeing more.

Re: Carved Maple Bowl

#11

Magic

Mike Rubes, Apex, NC

>Hi Jennifer,

Lovely work! Out of all the different types and styles of woodworking, there is nothing that is as magical to me as carving. Getting the curves right and proportions and being able to "see" a piece hidden in the wood is just amazing to me.

I really like this piece. The carving seems very delicate and not to be a sexist, but very feminine while the overall heaviness of the piece is masculine. I love that dichotomy and think it works really well in this piece. The bowl within the bowl is a very powerful form and the way the smaller bowl is emerging from the larger bowl I think ties this all together wonderfully. I like almost all the pieces I see here on WC, but this one really "speaks" to me. I don't think there is anything to add that could make the piece better. The only thing I could offer is that in the last picture you can see how the rim starts to curve in and tuck under the other side? It might be just the photo, but that looks like the rim straightens out a bit. Could that be carved a bit more to curve more into the outter side? That might not make sense. The idea, I think is to have the rim curve in like 1 spiral arm of a nautilus? That's how it looks in the first two pics, so it may just be the way the photo turned out in teh bottom pic.

Thanks for posting. I cannot even imagine how cool your stuff will be *after* you take a carving class!!!

Mike

Gonna need a bigger "keeper" folder soon in Apex, NC!!!

Re: Carved Maple Bowl

#12

Re: Carved Maple Bowl

Gil Jones on Lake Seminole GA.

>Jen, it looks very nice as it is. It might be interesting to find out how adding color to the stippled area would look (just a thought).

Re: Carved Maple Bowl

#13

Re: Carved Maple Bowl

Doug in AZ.

>Beautiful Jen! You have a woderful touch. As to your question of missing something, the only thing that comes to mind is maybe an ebony base for contrast and presentation. Keep it up, you have something going on!.

Later,

Doug in AZ.

Re: Carved Maple Bowl

#14

Are you crazy?!

Joanne Adler in Pt. Pleasant, PA

>Were you not just the other day bemoaning the fact that Carole is charging past and leaving you in the dust in the turning arena? Now, not to take away anything from our Rodeo Girl, Carole, and the incredible work she's been producing lately, but these two pieces are fabulous! Add in the platter with the bb's and swooshes that you posted a few weeks ago (I loved that, btw) and we're talkin' High End Gallery, girl! I've been trying to add some carving in my flat work. Now I think I'm re-inspired to try again. Thanks! See, I knew I liked lurking over here.

Gee, maybe you could get your work on display in that gallery where that famous Thomas Skaggs shows his fine furniture. :-) Now that would be a great combined show! Keep 'em coming, Jen.

Re: Carved Maple Bowl

#15

Re: Carved Maple Bowl

tek-Brunswick, Ohio

>That is a very nice turning, Jen. I don't think you need to add any more design elements to it. Danish Oil will go over BLO. I'm partial to General Finishes Danish Oil, but any of them should work.

Tom

Re: Carved Maple Bowl

#16

Re: Carved Maple Bowl

Scott Greaves in Blackfoot Idaho

>Hi Jen!

I think it's wonderful! At this point you should see if you can take a course by Trent Bosch. He's an excellent teacher, and he makes all this carving stuff seem easy and fun!

Scott.

Re: Carved Maple Bowl

#17

Keith Tompkins

Re: Carved Maple Bowl

Keith Tompkins

>Hi Jen...Both pieces are great. I like this one better by far however. I am impressed.

Re: Carved Maple Bowl

#18

Yes, she IS crazy!!! LOL

Carole Valentine

>Do you know that she did not even bring any of her work, except some pens, to the Gathering???? Really bugged us because we all wanted to hold it. She is producing some really neat stuff and has inspired me to try my hand at this carving thing. I think she needs a swift kick in the butt like the one the crew (including her) gave me. ;)

Re: Carved Maple Bowl

#19

Sensuous.....'nuff said.

Eddie Pacheco, San Jose, Ca.

>

Re: Carved Maple Bowl

#20

Re: Carved Maple Bowl

Bob Fawcett

>I like it like it is Jennifer.

Don't change it.

Re: Carved Maple Bowl

#21

What are you wondering about, exactly?

Doug Trembath

>Jen, it's fluid, graceful. and flows well all around. Didn't see the bottom, but I know you well enough to trust you on that, so,

again,,

What are you wondering about? Put a pricetag on it, and go on to the next one!

Really beautiful, Jen..

Doug Trembath

Studio in the Woods

Re: Carved Maple Bowl

#22

Thanks....and some comments....

Jennifer@Indy.USA

>Thank you everybody. I feel better now :)

The main thing that I guess wasn't sitting right with me is that I had hoped that after I textured the inner bowl that it would appear darker than the rest of the piece. Almost like it was emerging from the larger bowl. I was hoping that the oil would soak in and darken on that part. There's not much difference in color as you can see. I'm hesitant to add color....a darker brownish tone....with Prisma Marker or dyes...fearing it would blead out from the textured area. I would like for the innter bowl to stand out more than it does. I also think I was a bit tentative on the carving....but I suppose I'll get more brave on the next one...and then the next. I'll probably chicken out at adding color....unless somebody tells me a fail safe way to do it and talks me into it.

I'm thrilled with your comments on this one. I think I'll try another!

Jennifer

Re: Carved Maple Bowl

#23

Caramba!

Jorge Castaneda

>That is very nice Jen, why you did not any piece to Ellijay??

Thanks for sharing

Jorge

Re: Carved Maple Bowl

#24

Re: Thanks....and some comments....

William Duffield, on the Cohansey

>You would be crazy to not try another, and another, and another... I really like this one.

Note that I haven't looked at your pics of the cottonwood one, yet. I don't want any impressions of that one to bias the following suggestions.

If it were something I was creating (not that I could have created it), at this point, I think I would make two changes.

Where the two falling ramps collide, I would remove the little stepped ridge between them. A sharply defined V, extending back towards the interior bowl, with the slight swelling of the outside edge of the left ramp at the intersection, would look cleaner, and still show the interaction of forces.

Where the right ramp begins to fall away from the textured bowl, I think the beginning of the drop is a little too abrupt. I would feather it out a little.

Please understand that I might completely change my mind if I could see and feel it in three dimensions, instead of just two.

Re: Carved Maple Bowl

#25

Re: Carved Maple Bowl

Jim Shaver Oakville, Ont. (In Phoenix!)

>Hi Jennifer,

I like the bowl emerging from the bowl form. The texturing looks neat, I am thinking one that might be similar to the carving might be a fun design form as well.

take care,

Jim