Pith removal
Phil Murray
>When creating bowl blanks, how much of the log center is considered the pith and needs to be removed? Vary by species or size?
Thanks, Phil
Pith removal
Posts
Re: Pith removal
#2Re: Pith removal
JamieDonaldson
>Varied by species and size is the correct answer- some will always be a problem,like fruit woods, and others are stable if turned uniformly thin and cured using the old paper bag trick!
Re: Pith removal
#3Re: Pith removal
Jim Pugh
>You generally cut on either side of the pith so that there is not a complete growth ring in your bowl blank. Usually about a two inch width will do it. On the other hand, if you cut 2 inches on either side of the pith you will have a 4 inch thick slab with the pith in the middle of it. This can be quickly removed on the band saw and the remaining pieces are essentially quarter sawn.
