Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

another shop made tool

Posts

another shop made tool

#1

Jack Guzman from Maine

another shop made tool

Jack Guzman from Maine

I just had to post this. This a chairmaking tool that I made. Anyone have an idea what it is for? I got a better tool for the job but this was what I used at first.

Re: another shop made tool

#2

I made one of those

Clifton C

Here's a pic of the one I made... :D

Re: another shop made tool

#3

Jack Guzman from Maine

here it is

Jack Guzman from Maine


Re: another shop made tool

#4

Re Shop made tool

Philip F Duffy

Looks like a scratch awl to mark the location of the grove around the chair seat. P.

Re: another shop made tool

#5

Re: here it is

Joe shelton

Looks like a scratch stock, but I don't think you're using it to saddle that seat.

Re: another shop made tool

#6

Re: here it is

roger lance

Scratch stock.

Re: another shop made tool

#7

Jack Guzman from Maine

Correct

Jack Guzman from Maine

It is a scratch stock for the groove on continuous arm chair bows and bowbacks. I use a better scratch stock that I made since but that screw did the job just fine.

Re: another shop made tool

#8

Re: Correct

William Duffield

Do you put the groove in before or after you steam bend it? Or, after it is bent, is it still close enough to straight that a straight sided scratch stock is immaterial?

Re: another shop made tool

#9

Jack Guzman from Maine

Re: Correct

Jack Guzman from Maine

After bending. My scratch stock has a curved face for the inside groove.

Re: another shop made tool

#10

Re: here it is

Methomania

It is a Scratch stock, I also use one of those.