Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Lubricating wood screws *LINK*

Posts

Lubricating wood screws *LINK*

#1

Lubricating wood screws *LINK*

Bill Houghton, Sebastopol, CA

In a thread now buried three pages down, there was discussion of the best lubricant for wood screws, with particular attention to the screws used in cabinet hardware like hinges. I've linked one of the posts, below.

I decided to offer my suggestion as a separate thread, since the prior thread was a long one, and the lubricant question was a diversion from the main topic.

Some years back, I picked up, at a yard sale, one of those wax (or wax-like) rings used to seal toilets at the floor; I should hasten to mention that this was a fresh, unused ring. I don't know what wax or waxy substance is used in making these, but it makes a great lubricant for screws: stays soft, lubricates nicely, inexpensive (even more so at yard sales!). I carve off a hunk and put it in an Altoids tin, making it easy to put in the toolbox. One ring will be a lifetime supply for me, probably.


http://www.woodcentral.com/woodworking/forum/handtools.pl/page/3/md/read/id/490966/sbj/screw-lube/

Re: Lubricating wood screws *LINK*

#2

Re: Lubricating wood screws

Wiley Horne

I do the same thing Bill. If you want, you can just stick all the screws feet first into the wax and take them out in turn. Very satisfying, like if all the socks clump up together in the drier :) .

Wiley....with an oldhouse, there’s a good chance you will have a wax ring stashed somewhere, unless you have replaced the whole shooting match (which is also likely).

Re: Lubricating wood screws *LINK*

#3

Similarly...

david weaver

..years ago, I saw eddie castellin (sp?) put up a recipe for something he called "sanding wax". It's just 50/50 beeswax/mineral oil.

It is only slightly softer than a toilet ring. Stick the screw tip in it just a little and there's plenty. I like to think that on the planes that I've made with screws in them that one day, maybe they'll come apart a little easier and oxidize a little less.

But that probably won't happen - that wax probably gets drawn into the surrounding grain until there's no useful concentration left.

Re: Lubricating wood screws *LINK*

#4

Re: Lubricating wood screws

david weaver

I mistakenly thought these toilet rings were beeswax with petroleum oil of some sort, but I guess beeswax is too expensive.

http://www.woodcentral.com/woodworking/forum/archives_turning.pl/bid/2107/md/read/id/168172/sbj/beeswax-toilet-ring/

The price I paid for two pounds of pesticide free beeswax (in so much as the beekeeper didn't use pesticides, i'm sure the bees gather some on their rounds) is similar to that archived post - about $6 per pound, $12 total and $18 including shipping.

I've still got a pound that I haven't touched and the beeswax and mineral oil mix is about 8 years old. Also great for chapped lips / hands.

never did find much use for it sanding, though.

Re: Lubricating wood screws *LINK*

#5

"slack wax"

david weaver

looked up an MSDS for "harvey's no 1" toilet ring.

the only ingredient was "slack wax"

Which google search says is unrefined paraffin wax. Interesting that it's nearly identical in looks to beeswax (dark yellow or brown). Never smelled (a new) one, I'm sure they don't smell the same as beeswax.

Re: Lubricating wood screws *LINK*

#6

This looks like the real deal

Wiley Horne

http://www.crystalsrawhoney.com/product/Pure_Beeswax_1lb.html?gclid=Cj0KCQjw_absBRD1ARIsAO4_D3ufNkbLhTLqa18vAfZj1zJc6lYU0a-DrUFTuGgdhm0QQNZKSUinrjwaAqoiEALw_wcB

Wiley

Re: Lubricating wood screws *LINK*

#7

Re: This looks like the real deal

david weaver

looks like the stuff that I have - not sure if color can vary by more than just refinement, but I never regretted making a quart tub of what is essentially lip balm (bought a gallon of food-safe mineral oil at the same time - still haven't exhausted that ,either).

I've taken material out of the tub probably nearing 1,000 times now. Even to lubricate the friction pad on the exercise bike.

Re: Lubricating wood screws *LINK*

#8

requirements

Bill Tindall, E.Tn.

not corrosive (eliminates soap), good lubricant, sticks to screw (this factor separates the good lubricants).

Stick wax, is used to lubricate band saw blades. It is available from any machine shop supplier and I saw it at Woodworkers Supply store next to the band saw. Nothing sticks better. After all it is designed to stick to a blade. Try it and I think you will agree nothing could be better.

Re: Lubricating wood screws *LINK*

#9

Is this it?

Wiley Horne

https://www.ebay.com/itm/Relton-STICK-KUT-Wax-Stick-Lubricant/372730695251?hash=item56c87b0e53:g:CmcAAOSwnAddRqkD:sc:FedExHomeDelivery!91741!US!-1

Re: Lubricating wood screws *LINK*

#11

THANK YOU!


Re: Lubricating wood screws *LINK*

#12

should anyone buy some.....!

Bill Tindall, E.Tn.

Band saw the stick into 2" lengths and give to friends or sell on WC. 2" will do hundreds of screws.

Re: Lubricating wood screws *LINK*

#13

I remember that discussion...

John in NM

Wax rings are very useful for a lot of stuff, in addition to their intended purpose, so it didn't surprise me much to hear of this use. What surprised me is that someone would sell one at a yard sale!

There was an episode of Canada's Worst Handyman where there were a lot of toilet removal follies - one of which is that the intrepid amateurs mistook the wax for something else as they were removing porcelain shards from the drain.... That show was hilarious in many ways, potty humor aside.

Re: Lubricating wood screws *LINK*

#14

Re: should anyone buy some.....!

Warren in Lancaster, PA

I have used beeswax since 1962. I am having trouble imagining that beeswax is inadequate. I think this Olson stick costs more than four times as much.

Re: Lubricating wood screws *LINK*

#15

Re: This looks like the real deal

John in NM

I have a couple pounds in a bread pan, bought the cakes 20 years ago in Tucson where there was a beekeepers store in South Tucson then. Probably gone now, but it was cool - $2 a pound as I recall.

I had read about it's use as a leather treatment and I wanted to try it (and unfortunately didn't look up methods, youtube was still on the new side then). I put it on a hot plate and dunked my leather knife sheath in it, surprised to see how much air that leather had in it. After maybe 20 seconds I realized I was deep frying my leather :D :D :D Sheath came out pretty stiff, but the wax sure did preserve the heck out of that sheath!

I've since seen some vids on doing this correctly, so I kept the wax for one day when I have some free time.

Re: Lubricating wood screws *LINK*

#16

Re: should anyone buy some.....!

Bill Tindall, E.Tn.

Once again I am suggesting the curious try something new and you are advocating they stay stuck in 1820 technology. Your suggestions would be more credible if you provided some evidence of what you have done in woodworking in the past 40 years. Experiment with something new doesn't appear to be one of the activities.

I have used both so I have the benefit of the comparison when I make the claim the stick stuff sticks better and hence provides better lubrication. And the format is more handy to my taste. Other's results may differ. Try it and make an informed choice. I'm not selling either so I don't care how someone's preference comes out.

But then I am sticking screws in maple which you say you eschew for woodworking. And the stick works well on oak too. I am sticking screws in all sorts wood around the farm and screws of lengths unknown in furniture making. Three inch hardened screw, torex bit, 18V hammer driver, a bit of stick lube and I can drive the screw into any wood. These are all modern technologies I take advantage of.

If someone is using bee wax and satisfied with the results I would not advocate changing. The Headley shop uses bee wax and is entirely satisfied with it. They have a 5 pound blob of it so there is no risk they will need to buy something ever. The stick wax suggestion is only for someone that hasn't decided how they are going to do, whatever woodworking they do, 40 years ago.

Re: Lubricating wood screws *LINK*

#17

Is that what causes the...

Joe shelton

..."Curiously Strong flavor"...?

Just kidding, Bill. I keep screws and some small bits in Altoid tins, but I'm switching to the plastic cups from Ice Cube gum.

Re: Lubricating wood screws *LINK*

#18

Re: Lubricating wood screws

Garthinsandiego

Both toilet wax ring and bandsaw lubricant also work well to temporarily hold a screw to the screwdriver in those cases where your fingers cannot reach. Just lightly coat the point of the screwdriver with wax and stick the screw to it.

Re: Lubricating wood screws *LINK*

#19

‘..if you would provide some evidence’

Wiley Horne

Hi Bill and all,

I have gathered over our years on the forum, that Warren is a professional cabinetmaker, joiner, carver, and perhaps pattern-maker and other trades I would not be familiar with.

In other words, it appears to me that he takes on a variety of commissions, all involving making something for a client, or repairing/restoring/replicating a piece of historic or emotional value for a client. If this is correct so far, then Warren may feel ethically or legally bound not to photograph a client’s property for the purpose of aggrandizing himself on a forum.

My surmises may or may not be right, but I am suggesting it wouldn’t hurt us to be sensitive to the wide range of reasons our fellows may have for presenting their ideas as they do.

Wiley

Re: Lubricating wood screws *LINK*

#20

Storage, cost and access

Jim Matthews

My shop isn't controlled for temperature or humidity.

Natural materials containing fat tend toward mold.

Small things get lost.

The curious items are expensive.

If you're spending your own money - there are other considerations.

I like leftover candles for this application.

Functional (the wax sticks to screw threads), they're big enough to find in the clutter atop my bench, and they come at no cost.

Re: Lubricating wood screws *LINK*

#21

Re: Lubricating wood screws

Darrell LaRue

I've been known to use glue to lubricate screws. You've all seen how slippery parts are when you smear them with wood glue, yes? Well, it works for screws too. But you may have a devil of a time getting those screws out if you change your mind about them.

Re: Lubricating wood screws *LINK*

#22

The mention of candles...

John in NM

Reminds me of a statistic I heard once and just looked up again - in an age when we have no fewer than 3 distinct light bulb technologies and great debates over which is best, retail candle sales in the US still tally in the billions of dollars.

Isn't that a bit like the choice between beeswax and saw lube? :D

Ironically, I end up using whatever paste wax I have on hand, heathen that I am. My shop is 50' down a hill from the house, and for some reason my pan of beeswax is up at the house. The at hand choice wins every time, regardless of the replacement cost....

Maybe I'll remember to bring the wax pan down next time, or maybe I'll spend the $2 for a toilet ring and use that :D Pretty cool to live in a world where we have so many options available and the ability to discuss all of them with everyone from Warren to Bill T. Sure beats reading magazines, though I did like the pictures (shows you how my head works, look at all the pictures first :D )

Re: Lubricating wood screws *LINK*

#23

Jim DeLaney, Austintown, Ohio

Re: Lubricating wood screws

Jim DeLaney, Austintown, Ohio

About twenty years ago, I melted some beeswax into an empty (and cleaned out) stick deodorant container - the kind that you turn a knob to raise the product out of the tube (Arrid, I think).

I've been using that for screw lube ever since. It's nearly time for a refill, but I've been amazed at how long the original has lasted.

Re: Lubricating wood screws *LINK*

#24

Re: Lubricating Saw Blades - Thanks

William Duffield

I'm off on a tangent, again, but I wanted to thank you for some other excellent advice you had given me and everyone on this forum. I had asked about problems with clogging of bandsaw blades when sawing hard oily exotic hardwoods, in this case Peltogyne and Dalbergia species. You recommended WD-40. I've been using it, sprayed on with the blade running and cleaned off with a toothbrush. It works well, better than anything else I had tried. (No, I haven't tried the Olson saw blade lubricant, but hunting it down and paying for it seems a bit redundant at this point.) The WD-40 leaves a bit of a mess, but that is easily cleaned up with a paper towel, and the folded and rolled paper towel pushed (carefully) into the running blade finishes clearing it of sawdust.

Re: Lubricating wood screws *LINK*

#25

I wonder

Jim Matthews

Would antiperspirant do?

Handy dispenser with a cover, readily available and cheap.