Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Lubricating wood screws *LINK*

Posts

Re: Lubricating wood screws *LINK*

#26

Screw tackiness research

Bill Tindall, E.Tn.

I found myself in a craft store in Asheville today (apple run for Cortland) where they had candle making supplies in bulk. There were three wax offerings- bee, paraffin and microcrystalline waxes. There are various grades of paraffin wax so the following ranking might change for some other grade. In terms of tacky, that is ease of sticking some to a screw or nail-

microcrystalline>>paraffin>bee. The microcrystalline was about like the band saw lube sticks. Fifty cents worth would be a 40 year supply for most.

The problem with candle wax is it likely contains hardeners which will make it less tacky. One common hardener is steric acid which could promote corrosion.

Re: Lubricating wood screws *LINK*

#27

Re: Lubricating wood screws

William Duffield

I saw that same tip, probably about the same time you saw it. I tried it, but someone must have left a critical step out of the instructions, because when I tried to turn the knob to extend the wax, the threads in the wax stripped. Evidently, I should have done something to loosen the bond between the wax and the container before I tried to extend it. It's still around here somewhere, and still works in a low-tech manner, by just pulling the cap off and sticking the ends of the screws into the wax. :D

Re: Lubricating wood screws *LINK*

#28

Re: Lubricating wood screws

John in NM

I thought those things pushed a plastic backer up on the screw... maybe you were missing that part?