Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Suggestions for hanging saws.....

Posts

Re: Suggestions for hanging saws.....

#26

Re: Suggestions for hanging saws.....

roger lance

Making use of this part of the saw to hang it may be simpler than trying to fill the open handle area.

The profile of the LV saws have both a useable curve and a gradual increase of blade/back width that would help the saw lightly wedge itself in place.

I'll be looking at this approach.....simpler is usually better.

Re: Suggestions for hanging saws.....

#27

Re: Suggestions for hanging saws.....

roger lance

TomD.....using your suggestion/example as a means of hanging saws flat against a wall, I came up with this solution:


The retaining bar uses magnets to stay in place:


Thanks TomD for the direction.

Re: Suggestions for hanging saws.....

#28

Re: Suggestions for hanging saws.....

david weaver

Very tidy!

Re: Suggestions for hanging saws.....

#29

Re: Suggestions for hanging saws.....

roger lance

naturally

Re: Suggestions for hanging saws.....

#30

Re: Suggestions for hanging saws.....

david weaver

I mention that only because a skill (tidy and organization, etc) that I am completely without!

Clinically without, no matter how hard I try, I can't visualize things being organized and can't do it.

Re: Suggestions for hanging saws.....

#31

Re: Suggestions for hanging saws.....

Hank Knight

Great solution, Roger! I have a "thing" about hanging tools with magnets, but your solution that puts the magnets on the retainer bar keeps them away from the steel. I like it a lot and may steel it for some future project.

Re: Suggestions for hanging saws.....

#32

Re: Suggestions for hanging saws.....

roger lance

I'm not sure why I'm more in the tidy/organized camp.....but, I do know there are some nature/nurture elements involved.

My mother use to kid me about a little toy ambulance that I had as a very young child and that I would take extreme care of this toy.....it survived in pristine condition until I was too old to play with it anymore and then it went off to siblings and its ultimate fate is still unknown (just part of family folklore).

I grew up working summers and weekends with my dad who was a housing contractor/builder. It was his habit to stop working before lunch about 15 minutes early so that the job site could be cleaned and extraneous tools put away and things could be organized for the afternoon. Then; at the end of the day; another job site cleaning, tool storage, reorganization session, etc. took place before going home.....thus, the job was readied for the next morning.

Another aspect of home/furniture construction is the design/planing stage where you are thinking of different approaches and different requirements and the best most effective way to do something.....like storing/displaying 5 saws above your bench in a given area where they can be easily accessed/safe/visible/ etc.....and not be in the way of the fixed electrical outlet.....be above the bench by some margin.....have enough room to lift the saw up out of its holder and get it back without hitting each other or the shelf unit above.....have a margin of space on the right side so that the saws look proper on their area....etc....etc....

I'm sure that when you build a plane you must be going through a similar process of exploring options and deciding on what you feel is the best solution given all the factors of which you are aware.

This same approach can extend to your shop also.....as you say.....things are changing.

Re: Suggestions for hanging saws.....

#33

Re: Suggestions for hanging saws.....

roger lance

Hank.....by all means.....

The magnets I used are from Lee Valley....99K3905....3/4" cupped magnet set.....which I've not used before but like very much.....they have a strong attraction and hold that retainer bar well.....but its not difficult to slip the bar loose....and they are held in by a screw which is very convenient. I'd definitely use this product again.

Re: Suggestions for hanging saws.....

#34

Re: You and I

Hank Knight

Roger, you and I arrived at the same place via different routes. My father gave me my interest in woodworking when I was a young kid. He, like David, had no organizational skills. In fact, I think he was constitutionally opposed to neatness and organization. When I would try to build something in his shop, I spent half my time clearing off a place to work an the other half looking for tools. It was enormously frustrating; and I swore if I ever had my own shop, it would have a place to put everything and that I would keep my work surfaces clear. I've kept that promise and adhere to it. The only time my shop gets really cluttered is in the middle of a project when I get too engrossed to put stuff away. Eventually, I get to a point where the clutter makes me want to scream. I stop there and clean up before resuming. It is a very calming exercise.

Re: Suggestions for hanging saws.....

#35

Re: Suggestions for hanging saws.....

david weaver

I think there are brain types, and mine works different than an organized, planning, sequential person's would. I'm kind of interested in this sort of thing because I'm sure over time, we'll find out what anxiety, OCD, etc, is tied to (it may be tied to both if people are on the far ends).

Too much planning gives me anxiety and I get confused and literally start forgetting things. I pick a few things I won't settle on and then work with them and figure out the details on the fly (which is how I would complete something like a plane). I have to own the knowledge, I can't "borrow" it from someone else temporarily and use it effectively in sequence, if that makes sense.

My wife is on the other end where there is no amount of organizing that is too much, and it results in things I can no longer find (she will organize some of my things if she can get a hold of them, but she stays out of my shop because it overwhelms her).

I have read since learning what gives me anxiety and why that disorganized but creative people often have a complementary skill set to people who are very sequential and planning and who have great executive function. People who are great both ways are rare (I guess depending on where you set the bar for great).

I don't learn that well from other people, which is unfortunate. Sometimes the lack of being tied to a routine makes it so that I can solve unfamiliar problems very quickly, though.

Re: Suggestions for hanging saws.....

#36

tooth protectors

Neal in SC

Next time you are near an office supply store, pick up some slide grips for report covers. Just went to the Staples website and they have a box of 100 for $34.69, which may be a few more than you need! I think I paid about a dime each several years ago. The down side is they are only 11 inches long. That works for most back saws, not so much for larger ones.

Re: Suggestions for hanging saws.....

#37

good quality reinforced tape..

david weaver

...would solve the problem of pairing them together.

Re: Suggestions for hanging saws.....

#38

Re: tooth protectors

roger lance

Neal....your option works out to be about 35 cents for a 11" plastic protector.....not too bad.

Highland Woodworking offers a 27" heavy plastic blade guard for $4.99....item number 454901.

The product I reference from Tools For Working Wood is actually 5'....not 5" as I mistakenly typed.....and can be cut to length.....sells for $6.95 and is item GT-SBG.

And as William says.....make your own by kerfing a piece of scrap.

Re: Suggestions for hanging saws.....

#39

Re: You and I

roger lance

Hank....I'm not totally anal about this cleaning/organization thing.....I too find myself working into a mess with tools/debris all over the place.....and, if I'm tired, I'll knock off for the night (that table saw requires a clear, rested mind).....maybe unplug stuff.....dust off some tool surfaces.....leave things as is.

But, first thing next time in the shop will be spent cleaning and putting tools away.

Re: Suggestions for hanging saws.....

#40

Re: Suggestions for hanging saws.....

roger lance

Anxiety = a sense of impending doom.....free floating/unspecified fear.

Interestingly, I find that the more organized I am.....the more prepared....the more knowledgable I am.....the less anxious I am because my level of control is high and my sense of doubt is low.

Not being tied to a set routine/thought process would allow for creativity/problem solving.....because, you are literally thinking "outside the box".

Re: Suggestions for hanging saws.....

#41

Not really necessary

Bill Houghton, Sebastopol, CA

I use them, too, and just butt them up against each other. A little hassle when removing/installing them, but not much.

Incidentally, putting them on is easiest by sliding them on at the heel of the saw, and then continuing toward the toe.

Re: Suggestions for hanging saws.....

#42

Re: Not really necessary

david weaver

Good tip - heel to front. I used to use those things, but with a till that stands saws, I don't need to any longer. But I learned your tip (albeit slowly) and it is a good one.

Re: Suggestions for hanging saws.....

#43

Re: Not really necessary

roger lance

Heel to toe for western push saws.

Toe to heel for eastern pull saws.

Re: Suggestions for hanging saws.....

#44

Re: tooth protectors

William Duffield

For a longer saw, you can attach two in a row. They are easy to cut to length. They work for rectangular card scrapers, too, even if you put a hook on all eight edges. The problem I have with them is they tend to get caught under the next tool in the tote and pulled off when you are removing the saw. Eventually, you have to pull everything out of the tote to retrieve them when you are packing up at the end of the demo.

Re: Suggestions for hanging saws.....

#45

good point

Bill Houghton, Sebastopol, CA

I own just one Japanese saw, which came in and continues to rest in a plastic sleeve; so it didn't occur to me to think about that style saw.