Re: One Would Be My Vote
Michael Brady
The more dovetails, the more side-to-side grain surface for gluing. Whether that is a measurable benefit in this situation is debatable.
Knowledge You Can Build On — Est. 1998
Re: One Would Be My Vote
Michael Brady
The more dovetails, the more side-to-side grain surface for gluing. Whether that is a measurable benefit in this situation is debatable.
Re: FYI
Hank Knight
I've used this "wrap-around" joinery in two pieces recently. It is very solid and helps resist wracking of the carcase.
[URL=http://s50.photobucket.com/user/hankknight/media/Hunt%20Board/DSCN0599.jpg.html]
[/URL]
note the small post
Bill Tindall, E.Tn.
I think it a must joint for a small post. Overkill for a big one.
BTW, nice joinery. What's the rest of this project look like?
Re: note the small post
Hank Knight
Bill,
The first time I cut this joimery was on a hunt board Garrett Hack designed and published in one of the magazines. I modified it a little to suit our needs. I posted this piece a while back.
[URL=http://s50.photobucket.com/user/hankknight/media/Hunt%20Board/DSC_2020Medium.jpg.html]
[/URL]
More recently, I used the joint on a chest of drawers I built for my kids:
[URL=http://s50.photobucket.com/user/hankknight/media/Chest%20of%20Drawers/IMG_1629_zpsovohrr03.jpg.html]
[/URL]
As you noted, both of these pieces have small posts.
Hank
Re: FYI
Michael Brady
Very slick solution for added strength where the legs incorporate into the carcase.
Beautifully done Hank!
Re: note the small post
Wiley Horne--So. Calif.
Hank,
I really love that hunt board. Could you comment on the woods and finishes?
Stunning work!
Wiley
Re: Beautifully done Hank!
Hank Knight
Thanks Brian. That's a very nice compliment.
Re: note the small post
Hank Knight
Thank you, Wiley! The top, door panels and drawer fronts are curly cherry finished with Waterlox. The carcase is soft maple dyed with reddish brown TransTint and painted with black milk paint which was partially rubbed off with fine steel wool and then waxed. The result was a soft very dark finish with mahagony colored highlights that does not show up well in the photo. It shows a little better on the left front leg in this photo:
[URL=http://s50.photobucket.com/user/hankknight/media/Hunt%20Board/DSC_0004.jpg.html]
[/URL]
Re: note the small post
Wiley Horne--So. Calif.
Hank,
Thank you! One other thing. I am very interested in the internal structure of cabinets with drawers and dividers and such. Could you describe how the drawer runners and guides and dividers are fixed? For example, what are the drawer runners attached to on the backside? Am trying to get a mental picture of the internal structure.
These questions are uppermost to me in the initial planning, when figuring out the sequence of how the thing is to be assembled.
Thanks,
Wiley
case internals
Bill Tindall, E.Tn.
This picture shows the framing for the base of my display case

For design reasons the front rail is thin. Instead of M&T the runner into the front rail I used a "3/8" lap joint and M&T into the back rail. This is typical of the joinery I see in Period stuff. I "lift" the runner about 1/32 above the drawer divider so the drawer doesn't scrub on it for a 100 years or so.
Re: note the small post
Bill Houghton, Sebastopol, CA
I don't usually like high-contrast wood mixes, but that one works very, very well.
Thank you, Bill
Wiley, check your email.