Re: Busted
TomD
Deep neck joints on guitars glued with pretty much anything (not epoxy) can be reversed with a needle and steam. This is a bread and butter repair/maintenance with steel string conventionally constructed guitars, though some kind of bolt on joint is a better choice. But that doesn't answer all the questions.
- Three are various joints that can be reversed with alcohol or heat that do not require the violence of drilling holes and steaming stuff.
- I am still unclear about the regluing phase. A mono layer of something that doesn't glue to itself would be bad. Hide glue chemically bonds to itself.
- Busted wise Franklin says the following:
"How do I clean up wet glue or remove dried glue?
For most of our water-based wood glues, it is often best to use a damp cloth and remove excess glue before it has dried. After the glues have dried, scraping or sanding works well. Steam from an iron may also be effective, but it will not take the glue out of the pores of the wood."
I would call that Franklin not making the claims you made quite as forcefully. Of course your claims may be more accurate, but people relying on Franklin may have seen something like the above.



