New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

July, "what are you working on"?

Posts

Re: July, "what are you working on"?

#26

Adam of Oakland

Re: A bench

Adam of Oakland

Nice one, Craig - and not sure if others got the "ratbike" reference, but I did. It's a perfect usage of the term. Elegant reuse of what's at hand.

Re: July, "what are you working on"?

#27

Adam of Oakland

Re: July, "what are you working on"?

Adam of Oakland

Joe, those are some really nice winding sticks! wowzers.

Follow up on the thread as your desk build progresses. desks are such an inspiring woodworking project theme. Like to see new ideas.

Best to you and your daughter at VA Tech. what's she going to major in?

Re: July, "what are you working on"?

#28

Adam of Oakland

Built-in project finished

Adam of Oakland

Hi Guys, I'm new on the forum after lurking for a while. I'm starting to understand the format and liking the vibe here.

First: Mr. Tindall, glad to see you cultivating your grand daughter for the woodwork shop.

Secondly, nice to see other folks' projects going on.

I would like to show off a piece I finished last weekend. A built-in bench/cabinet system for our bungalow. first time doing this kind of cabinetry. challenging but the extra storage and seating is very pleasant. I used birch ply for the bones (cut using a circ-saw). but the rest is clad in reclaimed doug-fir. Mostly hand tools for the hard to fit parts. A band saw and thickness planer helped a lot tho.




detail of furnace supply register vent below a smaller drawer


shop cat


Re: July, "what are you working on"?

#30

Re: Nice Larry, very nice ... more pics please!

Larry Barrett

Hi Derek

Here are a few more pictures. My wife requested a bench she could place by the front door to assist folks coming in and removing their shoes. Bench is made in the style of a Joint Stool, a la Alexander and Follansbee. Instead of riven oak, I used some cherry I had on hand. The legs are riven, as are the pegs; the rest is flat-sawn. I was not sure how well cherry would stand up to draw-bored joints, but it was fine. I left the pegs as-is on the inside top so someone someday can see how this was done. The top is a board with some rather wild grain for cherry, and had some twist in it. The rabbet and gentle curve on the edge were done with a rabbet plane and bench planes. I attached it with z-clips as you can see in one of the pics. Not easy to see in these pics, but the stretchers are some old cherry, cut and sawn at least 50 years ago. They are considerably darker than the newer cherry, which I suppose will have a similar apperance in another 50 years. Finish is just a coupls of coats of walnut oil.










Re: July, "what are you working on"?

#33

Nice work Adam!

John in NM

I like the louver for the duct, that is a very classy touch. This kind of built in can be very tricky to pull off, but it looks like you've made a very professional job of it.

Re: July, "what are you working on"?

#34

Welcome to the forum......

roger lance

Liked the built-ins.....liked the shop cat.....liked the shop with hand made roof trusses....and liked the big bandsaw! You're going to fit in just fine.

Re: July, "what are you working on"?

#35

Re: Nice Larry, very nice ... more pics please!

Derek Cohen (in Perth, Australia)

Hi Larry

I like the look of that Cherry far more than Oak. I have not worked much with Cherry, the little having to come from the USA. Perhaps Oak is more traditional, but he Cherry has a softer, cleaner, warmer look (and feel).

Why did you have a concern about drawboring in the Cherry? My logic says his should have been more workable ...?

Regards from Cape Town

Derek

Re: July, "what are you working on"?

#36

Re: A Special Box

Wiley Horne--So. Calif.

Hi Jim,

A very kind act, and lots of care taken with all the Greene & Greene details, too. Perhaps a remembrance for his family, or for the workplace?

Your story brings to mind a very well-loved co-worker who died at 50 or 51 of a sudden heart attack, way too young. Was a hugely shocking event, though he had a metabolic condition affecting his heart that all the marathon running couldn't reverse. He was running when he died. Very active in Habitat for Humanity.

These kinds of people are always with us in our thoughts. Your carefully made box will serve as a marker and example.

Wiley

Re: July, "what are you working on"?

#37

Re: Built-in project finished

Wiley Horne--So. Calif.

Welcome to the forum, Adam! A great first post, too. Beautiful clean work; gives the space a serene atmosphere. Extremely nice shop to do such work in--very fitting.

Wiley

Re: July, "what are you working on"?

#38

Re: July, "what are you working on"?

Wiley Horne--So. Calif.

That is gorgeous, Larry! I had to blow it up before I saw the ornament in the rails. Truly striking, and one for the ages.

Wiley

Re: July, "what are you working on"?

#39

One more photo

Wiley Horne--So. Calif.

I forgot to say it is a desktop. Here is a second photo, with the stringing flushed down and glue planed off:

http://www.flickr.com/photos/78661951@N07/9276142351/in/set-72157632172323442

Now the legs, drawer box, and drawers have to be built. I will be asking opinions of the group on ornamental details, as I go along.

Wiley

Re: July, "what are you working on"?

#40

Re: Nice Larry, very nice ... more pics please!

Larry Barrett

Derek

Why did you have a concern about drawboring in the Cherry? My logic says his should have been more workable ...?

Cherry is indeed more workable than oak, at least more workable than air- (or kiln-) dried oak. The work Follansbee does is using green, or green on its way to air-dried, oak, so is considerably more forgiving. My concern, however, was with the cherry pins. Even though these were made using riven cherry, these pins take considerable abuse when driving them into the draw-bored holes. These were 5/16 (slightly less) pins, driven into 5/16 holes, with an offset hole in the 3/8 tenon. I wasn't sure if the cherry could take it. I did make a test piece and it worked fine, so I boldly moved ahead on the bench, and all went well. I have used oak for this before, and had no worries, but cherry is not as tough.

Re: July, "what are you working on"?

#41

Adam of Oakland

Re: Built-in project finished

Adam of Oakland

thanks for the compliments, guys!

i'm very lucky to be able to do this sort of work. last week i realized this is the first piece i've done that might just last longer than me, and i'm okay with that, but the thought does give me pause.

woodcentral is a cool forum. took me a bit of time to get used to the format but now that i *get* it, I am happy with it. Mostly, I just like the folks. good people and good content. I learn a lot here.

here's another mini project for today, a wall mount mirror for our 1/2 bath that was just put in over the winter. The frame will be screwed right into the wall over the sink:


here's the mirror, 14"dia. I think it was a cocktail service tray or somesuch. My wife found it an an antiques fair and thought it'd be a nice mirror for our small 1/2 bathroom:


Re: July, "what are you working on"?

#42

Re: Built-in project finished

Bill Houghton, Sebastopol, CA

Very nice. Those carve-outs for the drawer pulls are a nice custom touch; not something you'll ever find in the catalogs.

Very pretty shop cat; looks a little like our shy guy.

Is that your window trim in the first photo? And what's the age of your bungalow?

Re: July, "what are you working on"?

#43

Adam of Oakland

Re: Built-in project finished

Adam of Oakland

Hi Bill - thanks, the drawer pulls i think were the best thing i've ever done so i'm glad you noticed them. Our cat, Paulo, is pretty shy, too. he was a rescue, borderline feral. started to take a shine to my bench, tho.

It's a 1911 bungalow. like most of the single story houses in our zipcode, they're roughly 1200' sq ft with one jack/jill bathroom, and two bedrooms. She's had a new foundation applied in recent years and feels pretty solid. I'm amazed at the quality of wood these older houses are made from. Very ring-dense and pretty clear. We had a crew rip out some ugly linoleum, etc and just have the subfloor treated with varnish showing. Even though it has some nail holes, it's gorgeous to our eyes anyway.

I contracted a local carpenter to help us remodel the house's south side (back yard facing). We redid the room where this built in was installed. Put in a 1/2 bathroom, French doors and a deck. I did the trellises and bench in rough cut redwood using timber framing methods with wood pins, etc. This was finished back in February:


Re: July, "what are you working on"?

#44

Adam of Oakland

Re: Built-in project finished (Window Trim)

Adam of Oakland

Sorry, forgot to answer your orig. question: The carpenter who did a lot of the heavy lifting on this project did the windows. they are very simple and straight forward. We ordered Marvin windows for the room to replace existing ones and then my guy just used some prefab molding butted to a 3/4" stick with the edges rounded over to make the base.

Re: July, "what are you working on"?

#45

Jim in Burlington Ont.

Re: A Special Box

Jim in River Oaks, Ont.

Thank you Wiley,

The box indeed is symbolic of Barry and his close knit family with brothers and sisters. I have found a way to take a design kindly shared with me by Darrell Peart to reflect on key facets of Barry's family and life. I wrote to the family and explained each detail and described how it united them in the family's story. He was one of six children so there are themes of 6 and 5 throughout. His youngest brother wanted to keep him so I choice to go for a look that would indeed be timeless. I will post images and story when I am done, I think that sometimes our work is inspired by design, other times our work is guided from life, for me this box is from a place I had forgotten about inside myself for some time.

Like your firnds passing, Barry's was without warning and came as a great shock to all of us who knew him and his family.

Thank you again,

Jim

Re: July, "what are you working on"?

#46

Still needs work 


Re: July, "what are you working on"?

#47

Re: Nice Larry, very nice ... more pics please!

Winton Applegate

My response after seeing the details of your bench was

Aahhhhhhhhhhhh !

LIke one's response after a large quaff of a particularly agreeable beer.

Re: July, "what are you working on"?

#48

Thank you all for the nice compliments ...

Larry Barrett

and my better half likes it as well, so a successful project.

Re: July, "what are you working on"?

#49

Re: July, "what are you working on"?

Joe in a Cleveland suburb

Thanks Adam.

"Best to you and your daughter at VA Tech. what's she going to major in?"

She received her BS last Spring and is going to Virginia Tech to begin working on her Phd in Soil Sciences.

Thanks.

Re: July, "what are you working on"?

#50

I used to have a cat...

Patrick Gibbons

Almost exactly like yours. I really love Doug fir. When it's good, it's very good.