gantry mill? Lee Valley get on it
TomD
Sorta, I think they run on a 2 axis set-up, with one being X, and the other Z; Left Right, Up Down. There are a few out there. One of the impacts is that one can design tapers on 1 inch, or any increment, vs the current 6 inch format. That might be overkill for many sections, but I am sure there are transition points that would benefit from that kind of thing. Since most people are designing in CAD anyway, I think the thing has legs if it ever get generally accepted that inch increments are the way to go.
http://www.rlnunley.com/nm42901.jpg
A CNC project has been on my to do list, seriously, for about 5 years, and the years just go by. There is the usual Canadian sourcing issue, and I probably chose some blind alleys also, I am really interested in this seemingly simple home made mill, but it actually turns out to be really expensive. I keep waiting around for the industry to supply parts, but they are not comfortable with the model where they supply parts, they want to be the entity that comes up with a 2-10 K machine everyone will want. And while that makes sense, I don't see CNC in quite that light. I think the whole thing is more open source. And I think someone like Lee Valley should realize that and sell parts that are somewhat easier to use, but allow one to configure specific tools. Unfortunately it is probably too late. What is that really saying? Someone should come up with a way of making this easier for 50 year olds? Like those smart phones with big buttons and small feature sets...