New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

What are you working on? April edition

Posts

What are you working on? April edition

#1

What are you working on?  April edition

Bill Tindall, E.TN.

Thought I had better get past April 1 to ask. I am still finishing up the line and berry chest. Miscalculated berries- there were 192 to add not 96. Thankfully I came up with a quicker way to locate the holes which I will post later. Bun feet are done and turned (literally) out well. All that remains is to scrape down the drawer fronts and add finish. Driving toward completion for daughters birthday April 12. And then its on to a modern desk from rift cut ash and stuff for daughters new house.

Re: What are you working on? April edition

#2

Jack Guzman from Maine

Spring has sprung

Jack Guzman from Maine

I started a new chair. Got all the legs turned and drilled and shaped the seat. Shaped and bent the arm.This will be another continuous arm windsor. My local people have started calling for spring time house repairs. I don't like doing carpentry anymore but my clients need it and I'm still able so I still do a few jobs now and then. Spring is always a busy time around here.---Jack

Re: What are you working on? April edition

#3

Re: What are you working on?  April edition

Ron Harper

Retrofitting a leg vise to my planing bench, making actoy box for a niece, and getting ready to make this for SWMBO


img

Re: What are you working on? April edition

#4

scott grandstaff

Re: What are you working on?  April edition

scott grandstaff

I got talked into doing a slab table. I was doing slab tables nearly 40 years ago.

But I needed the money

Here it is so far. A redwood slab 6' long. Its going to have a sturdy floating apron (both sides are finished so it can be flipped). Under that will be some original Eames hairpin legs.


But today, I was playing with an English Bowie I had started almost 20 years ago. I made the handle today. I used snakewood.

It is a hard enough wood that this entire handle was shaped entirely with files. A vixen milled tooth file and 2, 12" flat bastards. One sharp and one dull.



yours Scott

Re: What are you working on? April edition

#5

Just Finished !!!

Ron in Sterling, CT

I just finished a keepsake box. It measures 11.5 inches long, 8 wide, and 3 high. The box and top frame are made out of Paduk, and the veneer is Bubinga. Finish is 4 coats of lacquer, rubbed out with a coat of paste wax. NO sandpaper was used. All finishing was done with a card scraper.





Ron

Re: What are you working on? April edition

#6

That is an awesome tool chest

Bill Tindall, E.TN.

Lots of drawers for lathe tools, calipers, chisels, measuring tools and you could hang planes upstairs.

On a more serious note, it surely will not have metal drawer slides? I might be inclined to mock up the feet and experiment with lightening them up a but. If not designed to be separate top and bottom parts I would consider making it that way for ease in building and handling thereafter. It will be a handsome addition and a practical one too if you have stuff for all the small drawers.

Re: What are you working on? April edition

#7

question

Bill Tindall, E.TN.

I am about to make a desk similarly assembled-veneered field, black band, mitered edging. Will you provide strategy details for how these elements went together?

Re: What are you working on? April edition

#8

Re: What are you working on?  April edition

David Weaver

Kitchen cabinets, that's all for the next couple of months. Combination hand and power tools only because I don't have a good accurate saw or good accurate jointer or good power M&T setup.

Re: What are you working on? April edition

#9

Re: What are you working on?  April edition

Sgian Dubh

This, tentatively named 'Torpedo Cabinet'-- American cherry and hard maple. It's going in an exhibition in May. I might post some images of the manufacture after it's done, as well as images of the finished piece. Slainte.

 photo tamb-cab-1-700px-web_zps4ef77761.jpg

 photo tamb-cab-2-700px-web_zpsc44db984.jpg

 photo Tambour-Cab_zps5472900c.jpg

Re: What are you working on? April edition

#10

Re: What are you working on?  April edition

CStanford

Nice, also love your drawing style, very warm and evocative.

Re: What are you working on? April edition

#11

Re: What are you working on?  April edition

CStanford

Can you tell me what sort of markers you are using for coloration?

Re: What are you working on? April edition

#12

Re: What are you working on?  April edition

TomD

Ukelele. Apparently they are hot. I didn't realize. Should be fun, less acreage than a guitar.

Re: What are you working on? April edition

#13

Re: What are you working on?  April edition

Sgian Dubh

Your compliments are appreciated Charles, although, to be honest, I don't think my drawing skills are particularly good. I need to practice more, but I also have a general preference for seeing furniture designed by other designers drawn by hand, especially if they have good drawing skills. I admit to being not very fond of images created on programmes such as SketchUp and and 3D SMax, etc. To me drawings created on those programmes tend to be a bit raw-boned if the user hasn't developed sufficient skill, and the drawings from people struggling to use the programme to its full abilities all look as if they were drawn by Mr SketchUp-- they lack personality. On the other hand if the user has developed real skill the images created can be superb and almost photo realistic, but again, they tend to look a bit stiff and lack the human touch somehow.

Anyway, enough of that. The pens for the black lines are Micron archival ink pens, Pilot rolling ball pens like you'd use for old fashioned drafting on a parallel motion board, and Stabilo point with a tight felt (I think) nib. To render or work up colour I use a mix of Copic ciao, Letraset markers, Magic Markers, and a brush tipped marker made by Tombow. I like the Tombow markers a lot because you can sort of 'brush' a colour and deepen it without leaving a track. The hard wide nib pens, eg, Copic ciao, et al can leave a bit of a track. I think in those drawings earlier on I used quite a mixture of most of the above.

Maple, ash, and other pale woods can be a bit difficult to represent, but you can get off-white markers that seem to work reasonably well, and you can sort of indicate grain by using a very pale brown. In a presentation to a client I'd add a wee square of prepped and polished wood (or woods) to show the real colour, and this would be attached 'artistically' to the drawing which itself would be mounted on a board or boards-- something like that anyway. In some cases I'd maybe place the design presentation drawing of the proposed furniture item in a bit of a drawn in room setting to try and suggest scale and proportion. Slainte.

Re: What are you working on? April edition

#14

Re: What are you working on?  April edition

CStanford

You don't give yourself enough credit - your drawings are fantastic. Thanks for the list of types and brands.

Cheers

Re: What are you working on? April edition

#15

Re: question

Ron in Sterling, CT

Bill,

Obviously, your scale will be much larger than mine, but here is the basic steps and process that I went through. First, I made the top frame with mitered corners, and a slot on the inside edge to accept the veneered top. Dry assembly gave me the final dimensions for my veneered piece. I then made the veneer glue up. Being so small, I just squeezed it between a couple of melamine boards with lots of clamps. I cut the piece to final size, then routed the tongue to fit in the frame groove. Then I routed a groove for the inlay, cut the inlay to length with 45's on the corners and glued them in place. The veneer assembly was then slipped into the frame, and glued up. Hope this helps. PM me offline if you have further questions.

Ron

Re: What are you working on? April edition

#16

craigd

Table & plane *PICS*

craigd

I just finished this Shaker table, the wood is very bland so I did some learning and tried french polishing and glazing. "French" is a bit presumptuous, what I did was pad on shellac using [mineral] oil as a lube. It really helps, do a half ashed job and you don't need to sand (what you see is "off the pad"). I wanted to add lots of yellow and red so I used orange shellac and a "Antique Maple" gel stain, which looked to me like firebrick + brown. It really warmed up the wood.


Now I'm trying to stuff a "big block" into an old transitional plane.


Re: What are you working on? April edition

#17

Question for Sgian

Patrick Gibbons

I'd especially like to see some pictures and comments from you on making and dying the tambour. I've seen this made in a book but it looks like something that takes a great deal of precision to fabricate and it's too expensive to buy already made. I find your design to be very appealing. Once again, I'm curious about the dyed tambour and what it will actually look like. I know it's stating the obvious that you've chosen to use a design with simple "bones", the basic design, and elevate it with the cigar-shaped legs and the tambour with its' coloring along with the brightness of the maple interior. The tambour seems to be the element that can make or break this piece. This is a very appealing piece of furniture.

Re: What are you working on? April edition

#18

Re: Table & plane *PICS*

Patrick Gibbons

Craig, I really like the ornament on the corners and legs. Good job of polishing. You achieved a good effect with staining. I've been burned by staining in the past and would have used garnet shellac to get the red you wanted. You did a great job.

Re: What are you working on? April edition

#19

Charles, you're right

Wiley Horne--So. Calif.

Could not agree more. Richard's drawings are compelling. Clarity and warmth. I especially like the ones showing all the drawer details--in fact, every time I see one of them, I want to tell him to write a drawer book (he says it's already been done).

Wiley

Re: What are you working on? April edition

#20

Re: Charles, you're right

CStanford

Yep - innate talent meets formal training plus experience = Richard

Re: What are you working on? April edition

#21

craigd

Re: Glazing

craigd

Thanks!

The nice thing about glazing is that it is stain applied over shellac so if you don't like the look, it isn't a problem to remove. Also, it takes over night to dry so you can wipe some off, step back and look, repeat until it looks "right". Then top coat.

Re: What are you working on? April edition

#22

Re: What are you working on?  April edition

George Allchin in Lowell, Mich.

I am making a bird feeder to replace the one that a raccoon destroyed. I made it out of cedar.

Work safe,

George Allchin

Re: What are you working on? April edition

#23

Yes

Bill Houghton, Sebastopol, CA

I'm with Patrick: I really like the way you mirror the corner bead on the leg with the corner detail on the top.

Looking forward to your souped-up transitional.

Re: What are you working on? April edition

#24

Re: Question for Sgian

Sgian Dubh

I'll see what I can do for you there Patrick. I dyed and polished the individual staves for the tambour yesterday, and took a few snaps, so I have a bit of a record. No action shots I'm afraid as I didn't have a helper, so it's impossible to work on the job and photograph things at the same time without a camera stand which I didn't have with me, along with a time delay on the camera. And on top of that fiddling with the camera can lead to distractions and mistakes. Next will be joining all the staves together, fitting the pull and test fitting the assembled tambour in the cabinet. Slainte.

Re: What are you working on? April edition

#25

Re: Charles, you're right

Sgian Dubh

Wiley, both you and Charles are determined to get me all swelly heided, but I'm not going to fall for it, ha, ha. I guess my sketches work reasonably well, but my drawing skills really aren't particularly good when I compare them to the images produced by designers and, I suppose artists, that have spent a long time developing their drafting and rendering techniques, and have really nailed down perspective and the like. Amongst that sort of company I really do only just about get by. I'm guessing a bit, but I think the two sketches I put up earlier in the thread took about 30- 35 minutes each, and I'm reasonably happy with them.

As for a text on drawer making Wiley, there's dozens of them out there already, so I'd just be adding to the noise. Slainte.