New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Shooting End Grain: How Heavy A Cut Do You Take?

Posts

Re: Shooting End Grain: How Heavy A Cut Do You Take?

#51

Re: Should have....

Derek Cohen (in Perth, Australia)

Hi Rob

Seems we brought the warm weather with us, but forget to take it along the remainder of our travels. I hear it was 49.5 C in Queensland.

Regards from a chilly Vegas

Derek

Re: Shooting End Grain: How Heavy A Cut Do You Take?

#52

Jack Guzman from Maine

Re: Impressions and some highlights of our trip so

Jack Guzman from Maine

Derek,you got lucky on two counts. When I visited Joel's shop(he was in Manhattan then) he wasn't there. I had to be content to drool over the tools.When my wife and I toured Frisco we crossed a fogbound Golden Gate Bridge and couldn't see anything.This was in July.

I have seen the Grand Canyon,from 30,000 feet.

Sounds like a great trip. You will have some good memories. Thanks for sharing.---Jack

Re: Shooting End Grain: How Heavy A Cut Do You Take?

#53

Re: the grand canyon

Lars Parrington

i visited the grand canyon a couple years ago. we drove in at the crack of dawn. so early that the park gates weren't manned and we didn't have to pay the entrance fee. so early because we were planning on doing a day hike down into the canyon and wanted to have plenty of time to get back out.

the morning started off clear, but by the time we got to the trailhead, it was foggy and drizzling. the whole canyon was filled in with fog. we couldn't see down into it at all and it looked like the trail was going to be slippery. so we sat in the car for a couple hours and thought about going home. before we left, we decided to just try the trail out a bit, to see if it was too dangerous, or if it was manageable. maybe we'd at least get some exercise even though there was nothing to see.

well it turned out to be relatively easy going, though we did have to shelter under an overhang once or twice when the rain picked up. we decided we'd hike for an hour and then turn around. when time was up, i said, "lets just hike up to this corner and then stop." well, ~100 feet later, we walked right out from underneath the cloud layer. suddenly the whole canyon was spread out in front of us, and we could see the sun moving in from across the way. pretty spectacular view. and pretty neat to think that almost no one else could see it. all those people at the rim of the canyon were still just staring at fog.

so we hiked down for a couple more hours, and had a picnic at the end of horseshoe mesa. from there we could just barely see the colorado river. we still felt like we had the whole canyon to ourselves. we saw only one other brave soul until we were once again only about an hour from the rim. by then the fog had lifted, and crowds of other tourists were starting to stream down the trail.

Re: Shooting End Grain: How Heavy A Cut Do You Take?

#54

That's a great story, well told!

Bruce, a MN Galoot

My undergrad adviser lived at the bottom of the Grand Canyon with the Havasupai for a year, doing his dissertation research. Your story is reminiscent of his. What a great memory!

Re: Shooting End Grain: How Heavy A Cut Do You Take?

#55

It won't be any warmer in L.A., BUT

Bruce, a MN Galoot

That's nothing compared to Minnesota, North Dakota, Ojmjakon or Sebastopol.

Re: Shooting End Grain: How Heavy A Cut Do You Take?

#56

Cold is a relative thing *LINK*

Bill Houghton, Sebastopol, CA

I found the entertaining YouTube video below yesterday. Southern Californians have a different standard of cold than others.


http://www.youtube.com/watch?v=_6t-EjrtD3U

Re: Shooting End Grain: How Heavy A Cut Do You Take?

#57

Re: the truth of why Derek is in Vegas... *LINK*

Patrick Gibbons

Here's a little poem I read as a child. Of course hell is relative.


He'll in Texas

Re: Shooting End Grain: How Heavy A Cut Do You Take?

#58

Jack Guzman from Maine

Great poem

Jack Guzman from Maine

I really like that. I'm going to print it and frame it so it can be read by all who would be so inclined. Thanks---Jack

Re: Shooting End Grain: How Heavy A Cut Do You Take?

#59

Don't Mess With Texas, Jack

Patrick Gibbons

Some of us still love the place, warts and all. My sister, also a native Texan, used to go up to Maine on a regular basis. She absolutely loves the place. Of course that was in the summertime.

Re: Shooting End Grain: How Heavy A Cut Do You Take?

#60

Jack Guzman from Maine

I like Texas

Jack Guzman from Maine

Maine is nice in the summer. But Texas...

I lived in San Antonio for couple years and visited Austin a bit. I also made a trip down through Odessa and Sonora to Brownsville/Matamoros and we even checked out Padre Island one time. I have a lot of respect for Texas. It is a big place with alot of different environments. The only thing I don't like about the state is Houston.---Jack

Re: Shooting End Grain: How Heavy A Cut Do You Take?

#61

I like Texans...

John in NM

The keep the NM Highway Patrol suitably distracted :D :D :D (Ducking and running :D )

Re: Shooting End Grain: How Heavy A Cut Do You Take?

#62

Grand Canyon

jack curtis

Truly as worth a long visit as everyone says, we were so impressed we stayed about 5 days, camped on the south rim.

However, you want to plan your next trip for as soon as possible. The uranium miners are getting rabid again, and if they win in court the canyon and everything around it will turn radioactive in very short order.

Re: Shooting End Grain: How Heavy A Cut Do You Take?

#63

Re: I like Texas

Patrick Gibbons

Jack, I was born and reared in Dallas. When I use to come down here to Houston for business, in the summer especially, I couldn't wait to leave. After I moved here I came to appreciate Houston for its merits. I still don't like the summer here, but I'm getting to the point I don't like summer almost anywhere. I find it almost impossible to work in the shop in the heat. When I get my finances in order again, I want to fix up the shop for cooling. Put in windows, insulate and Sheetrock the walls and ceiling, add an AC. Probably one of those pipe dreams that will never happen. October to March or April are great. Sometimes even May and June are OK. July through September are the pits. People in colder climes would probably reverse that order. We all have to put up with something.

Re: Shooting End Grain: How Heavy A Cut Do You Take?

#64

Jack Guzman from Maine

Re: I like Texas

Jack Guzman from Maine

I never actually visited Houston. I suppose I never gave the city a chance.When I came through it there were four of us and we were hitchhiking to New Orleans. I think it was 1972. All I remember is this long stretch of highway that went right through a business district. It was noisy and dirty. We got rousted several times by the Houston Police. They told us it was illegal to hitchhike anywhere within city limits so we ended up walking clear through town. It was a long walk.Needless to say,we were happy to be rid of the place and I have forever held unfond memories of it.---Jack

Re: Shooting End Grain: How Heavy A Cut Do You Take?

#65

Re: the grand canyon

Keith Newton

The first time I saw the GC, was Jan 1 1978. It was snowing at the rim, melting just below the rim, then evaporating within a few hundred yards on down.

I've spent a week pack-packing down in the canyon twice, which was pretty incredible. I need to dig out some of the slides, and scan them into my computer.

It was great getting down past where the crowds never go, finding indian ruins etc.

One day, I hiked up a side canyon from our base camp to view the highest waterfall in the canyon. Trying to get the best pic I could, I climbed up a scree slope through very thick brush, and found what I'm pretty sure was a Dinosaur egg. Man, I wanted to sneak that thing out, except for it weighing about 40#, and having about 3 days walk to get it out. Our packs were 80# when we left Phantom Ranch on the way in, but would be lighter coming back out. However it is more uphill on the way back. ha