New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Does anyone work in metric measurements

Posts

Does anyone work in metric measurements

#1

Does anyone work in metric measurements

Bill Tindall, E.Tn.

Every time I need to divide a space into 5 drawer heights (result 5 and 5/134") I think how much easier the task would be working in the metric universe or even decimal. But then fear of the unknown pulls me back from this path. Has anyone make the leap from English to metric? What were the problems to be overcome. The scale on my table saw and planer would be two that come to mind.

Re: Does anyone work in metric measurements

#2

Re: Does anyone work in metric measurements

Richard Jones

Bill,

I use it more and more. So much easier to divide, do percentages, golden means, etc. The tapeline at my lathe is both metric and Imperial, but I rarely look at the "inch" side anymore. Now I find it carrying over into flatwork, although I do little of that anymore.

If an old guy like me can do it, so can you.

Rich

Re: Does anyone work in metric measurements

#3

Re: Does anyone work in metric measurements

david weaver

When a buddy and I used to work, he did his plans in autocad in mm. We jointly chose projects so that we could do two of the same thing and make it easier for us to do the plans and get supplies.

I mooched his plans and we worked in metric.

I work with decimal inches where I can, but not using anything but a bandsaw now, it's rare that I do anything where the ruler needs to have that much precision. I'd rather use a matching part to make a mark.

Still, I can't see any virtue in using fractional inches.

Re: Does anyone work in metric measurements

#4

My problem with metric

Patrick Gibbons

I have two problems with metric. One is that I don't have metric-based measuring tools nor are my chisels, etc metric. But the real problem is that I conceptualize in inches/feet. If I think of 13 mm, I will think of it as a large half inch. It's the same problem I have with foreign languages. I translate in my head rather than thinking in the language. I've been told that I will eventually do this but it has never happened for me. I think most people will do better at this than I do. I think the analogy is sound. Using metric is like speaking a foreign language. By using it you'll eventually conceptualize in it.

Re: Does anyone work in metric measurements

#5

Re: My problem with metric

Bruce, a MN Galoot

I use metric for small measurements. Although I've been using Imperial measurements my whole life and am very adept at everyday use thereof, juggling metric is just simpler and much less likely to confuse. Some of my tools are metric, some are Imperial. Frankly, I don't know which, and I don't care. There is very little plywood that is actually 3/4", I thickness boards to fit the situation or to what looks good, and it doesn't matter to me whether that turns out to be one measurement system or the other. I rarely build to plans anyway, but if I did it would be hard for me to visualize the metric equivalent of 36" because I'm so accustomed to Imperial measurements for relatively large sizes.

Re: Does anyone work in metric measurements

#6

Re: My problem with metric

hennebury

We use metric in Canada. I use metric for small measurements, but still conceptualize large dimensions in feet and inches, never have seemed to break past that yet either.

I do find it very easy to work with for small measurements, and always have a digital caliper set to mm in my hand for measuring stock and joinery etc. I fitted one on one of my thickness planers a few years back and found it great.

For the most part I try not to measure anything that i don't have to; I usually divide lengths and transfer dimensions directly from dressed stock on to a master layout stick, doing all layout lines with a marking knife. the more measuring the more chances for making a math mistake, and imperial measure is the worst.

Re: Does anyone work in metric measurements

#7

Like a language...

John in NM

You do eventually get used to it when totally immersed.

When I used to work in Mexico, I quickly got used to thinking in Spanish and kilometers, and valuing stuff in pesos.

I don't, however, use metric in the shop. There is just no point for me.

Re: Does anyone work in metric measurements

#8

Canadian problem

Jerry Gibbs

Took a class with a woman from Winnipeg. I said at least you can work in metric system. She said that although Canada is metric, when you go to Home Depot etc. you get goods in Imperial, so she still has to deal with both systems. Jerry

Re: Does anyone work in metric measurements

#9

Re: Does anyone work in metric measurements

William Duffield

I have a degree in computer science and used to program back when programming required working in binary, or one of its logical extensions, octal or hexadecimal. Fractional inches make all the sense in the world, and I have no problem working in halves, quarters, eights, sixteenths, etc. Someone made a huge mistake a long time ago when they thought it would be cool to invent a number system where you had to count on your thumbs as well as your fingers. They must have been from the equivalent of Texas, where the dogma is that more is always better.

The other important concept they missed was in not inventing a positional notation system for counting on your fingers. With a positional notation, you can count from zero to 31 on one hand or to 1023 on both. BTW, the unit "K" is not 1000, it is 1024 (when it's not Kelvin). Some idiot who didn't understand made a rough approximation for all the other mathematically challenged out there.

The attempted conversion from Imperial to Metric just traded one can of worms for another. The trees still are not convinced. They still grow in imperial units. How much do you pay for FAS tulip poplar in Euros per cubic meter? Oh, forget it. Tulip poplar doesn't grow in Europe.

"There are 10 kinds of people in this world: Those who understand binary, and those who don't."

OK, rant mode off (mostly). To answer your question, yes, I use metric, but only when I need to measure the placement of a Festool Domino or to set the depth of cut of a Festool plunge saw. (I find that to be a major annoyance, but they make up for it in other ways.) I have one 6" steel ruler with metric graduations on one side and imperial on the other, and digital calipers with a button for automatically converting between inches in 64ths, inches in 100ths and millimeters. They stay mostly buried in the bottom of a systainer. I prefer using my dial calipers that read in 64ths, because for most operations, that's all I need and those calipers never suffer from a dead battery or a CME. None of my Starrett rules and none of my tape measures are graduated in metric. That would be a waste of real estate.

Re: Does anyone work in metric measurements

#10

Metric  Smetric

Paul Dzioba

Use a pair of dividers to divide that space into 5 in about 30 seconds.

Re: Does anyone work in metric measurements

#11

Re: Canadian problem

hennebury

Its true, in Canada we are supposed to be metric but half of what you go to a store to buy is in imperial.

Just last week i was looking for a metric tap at the hardware store; good luck with that one.

Re: Does anyone work in metric measurements

#12

Re: Does anyone work in metric measurements

Robin Corell in Atascadero CA

Way back when I was an apprentice the first tool I bought was a 12” Starrett rule marked in 32nds, 64ths, 50ths, and 100ths. This was when I was just starting to learn decimal inches and the reason I bought that particular rule is because it is what my boss told me to buy, and the one thing I had learned by that time was to do what the guy who signed my pay check said to do. It probably took me most of a year to really get decimal inches down to the point to where I started to think in decimal inches vs. fractional to an accuracy of 32nd. Now I find myself writing down decimal inches when using a fractional tape.

Robin

Re: Does anyone work in metric measurements

#13

Bill I can't go there

Ron Harper

I have tried. I understand your point completely. There is no question that it makes the arithmetic surrounding our work a little easier.

I once knew an idiot even more opinionated than I am who swore that the metric system was a more accurate form of measurement. Arrant nonsense. I think he was also trying to say that the arithmetic was easier.

I am way too set in my ways of thinking in feet and inches.

Re: Does anyone work in metric measurements

#14

Metric taps

Bill Houghton, Sebastopol, CA

"Just last week i was looking for a metric tap at the hardware store..."

Go to a good auto parts store.

Re: Does anyone work in metric measurements

#15

Re: Metric taps

hennebury

Thanks Bill,

I will check there next time.

It is just a little frustrating when we are supposed to be metric here, and yet its all just a hodgepodge of both.

Re: Does anyone work in metric measurements

#16

Yes

Kees

But that's really no wonder, having lived all my life in Europe. I do read a lot of American and Britisch stuff though, and I am starting to get better at imperial meassurements.

Re: Does anyone work in metric measurements

#17

Re: Does anyone work in metric measurements

jack curtis

Certainly I do, and love it. A millimeter is as small as I ever need, so I'm always working whole numbers. I've also developed some fast, mental conversion methods, such: 100 mm ~ 4", 25.4 mm = 1", and 450 g ~ 1 lb. Where I have a little trouble is with volumes, so I still cook in ounces, pints, quarts, and pounds.

This was helped along by purchasing and using Japanese and European tools.

I also occasionally use digital imperial, mainly because I bought this cool dial caliper 100 years ago and it still hasn't broken. The power of 10 is powerful and easy.

Re: Does anyone work in metric measurements

#18

Re: Does anyone work in metric measurements

Bruce McCrory

I think the back room wants to dump fractions. The Science Lab is pushing to force metric. Unfortunately, the standards board (for metric, SI(?)) keeps changing everything--for job security--and ucking fup the cart.

2.54cm, 25.4mm = 1-inch. From there, I multiply and divide. My tools are mostly English; and for that prefer to stay with same.

Years ago, I learned to pace in chains, then feet: 5.5' = one pace. Pace = lead foot to lead foot. A step is 1/2 a pace.

In my profession, I could eye-ball feet [outdoors] quite closely to accurate. In architecture, I used a mechanical AddFeet Jr.. I still do. For civil engineers, who think the world revolves around their 10th of a foot, my 1/4-inch scale drawings are 4:10. (Yes, one prick can nearly destroy his profession's credibility. The worst one of very few.)

In CAD, I use feet, inches and tenths to 100ths of each. I used to know decimals of fractions to 16s and expressed them in 100ths. I had a cheat sheet, two pages, for oddball referencing. I don't do fractional design in CADD. It's like telling the book keeper to type the numbers ('one', for example) when balancing the books.

A few years ago, about 10, CA (Canada) buddies snickered when I asked how they like metric. They all cheated and used English when possible. I wonder if Oregon still requires metric. Current status of AutoCAD is close to "ease" of a button for conversion.

Ya, shuur', it's a sad world when I can't use my thumb and little pinky anymore; for all the numbers they carry to the table.

Re: Does anyone work in metric measurements

#19

Cms . . .

steve mackay

I do but I work in miniature. One of my best friends is a 15 inch ruler with metric. It hangs in a place within easy reach of ALL work stations. The only drawback is calling Dad for advise on a set-up. He is an "oldschool" tool & die maker and doesn't speak METRIC.

Re: Does anyone work in metric measurements

#20

and nautical charts

Jerry Gibbs

While having a wonderful time on the Trent-Severn waterway, the small boat channel of Georgian Bay and the North Channel of Lake Huron, we had to switch from metres to feet to fathoms depending on the chart page. Jerry

Re: Does anyone work in metric measurements

#21

aerospace industry

Jerry Gibbs

I don't know about today, but my father-in-law worked in inches and tenths of inches regardless of length. Jerry

Re: Does anyone work in metric measurements

#22

Jack Guzman from Maine

Re: Does anyone work in metric measurements

Jack Guzman from Maine

I remember when I was in grade school(long ago?)they tried to convert us over to the metric system. The attempt failed and that is as close as I ever got to using the metric system. Sometimes when I'm laying something out on paper I'll use the metric side of the ruler if it helps lining up marks on paper. Otherwise I either use story sticks and such or imperial measurements. I get confused easy enough without complicating things further.---Jack

Re: Does anyone work in metric measurements

#23

What am I missing here?

MikeL

I spend my days as a biochemist using exclusively metric units. When I go home, I work almost exclusively in imperial units. Unless a calculation involves working across very large magnitude differences (e.g. femto to micro), I don't see anything particularly more efficient with metric measurements over imperial. Unless your work piece happens to be an exact multiple of 5 in metric units, you'll still have to deal with fractions somewhere when you divide it into 5 equal sections. Sure, you can push the decimal place around and easily go from cm to mm (or even um if you have bionic eyes) but, as you alluded to, there's nothing inherently different in that than using hundredths or thousandths of inches.

That said, I think we (the U.S.A) missed the boat when we refused to change over in the 1970s but that's more about standardization of practices rather than metric being easier.

Re: Does anyone work in metric measurements

#24

Re: Does anyone work in metric measurements

Edward in Vancouver

Actually, I do!

.....Just not with woodworking, though.

In "my other life" I'm a baker and chocolatier,--in Canada. ALL of my recipies and measurements are in metric, and in weight--not volume. Makes it very easy to increase/decrease recipie batches, and for food costing.

But for woodworking? No. Any lumber I can get my hands on is in imperial, all fasteners are in imperial.

I don't have any issues with the metric system, I used it when I lived in Europe for 6 years, and I like it just fine.

I'll use metric in woodworking when the lumber comes in metric measurements, and that won't happen until the U.S. goes metric, and that's anyone's guess.

Besides, I'm not ready to give up my most treasured Fleamarket find: A 24" Starrett rule in 8'ths and 16'ths only--got it for a Toonie (CDN $2.00 coin)......

Re: Does anyone work in metric measurements

#25

Re: Does anyone work in metric measurements

TomD

I work in either, and was schooled in metric, while the world around was imperial at the time. Canada is not metric. The government is metric, but the market is a bit of both. You know, 4x8 sheets of plywood, chisels, and screws and bolts. Today I was at the large non-local industrial supply, and could not get the metric supplies I needed, when a job started out around a Sandvik, part. Now I am ending up with two distinct lines of crap, as I know that the one I made will be metric (stuff to order for that), while the stuff I am thinking of selling I just decided to do in imperial, because that is what the US will want.

If you can do anything do it in one style only. The math issues and other issues are all nonsense. There are a whole bunch of more, or as, accurate methods of doing a divide by five. I think a lot of this comes from a general lack of knowledge about mechanical drawing. My uncle, whom I rarely see, used to be responsible for admiralty naval charts. We were once doing a job, and what he could do with dividers, and other things, was eye opening. I only wish I could have heard more.

I also do a lot of Cad, stuff, and I can just print out scales, that are customized story boards. So if I want to do a musical scale, I really don't care if metric or imperial divides more easily by 18. I just spew it out in frets. And if I really was connected, I would do it straight to CNC.

Metric is maybe new to someone, but let's face it, it was the beginning of the modern scientific age, not the least bit current. The irony is that in the old days, they measured off body part units. Then some jackass comes along and figures certain physical ideas like the boiling temp of water, and density, and calories, is a better way to do things. Never proved the least useful in my world, after school. But today, we can model human dimensions, or anything else directly, we don't need the mediation of some admittedly elegant/irrelevant system. Back to the body parts in a sense. I don't judge a system of measurement by how well it works in some other guys place of work. I'm not connected to the verities of nature, I live in my installed base and supply chain.

With metric/imperial (which is the real world of metric in NA). You will generate thousands of new calculations, and stock problems, that just won't come up if you are in one or the other. If I lived in an entirely metric environment that would be great, but the US is not, and Canada is not.

There are a lot of situations where fractions are easier to work, with. I am not saying better overall, but there are many advantages, 5/8 over 2 equals 5/16 kind of stuff. On longer measurements, such as in boatbuilding, the tape gets confusing in metric, and errors occur, they show up on metric plans a lot more. But I have to say, on small stuff it probably doesn't mater. 231, is probably fine, it is when you start to look for a place on the tape that is like 23132.

I think there is a caché to any system that is not in general use. Most of the people who say how great metric is will cough up some completely irrelevant science argument, that may well be true, but has no bearing on the real world. It's like Doc Martin boots or something. If you believe you won't be happy with anything else, but as to any real advantage, not so much.

An example of the real world, take the lathe mentioned. A scale has not that much to do with the machine. The asian machines are mostly metric in their guts, their gearing, and their threads. But most are being sold to work imperial tooling, collets, chucks, work and markings. It's a giant kludge. Just more of the nonsense one gets from the new world order.

I started out in life, and in cabinetmaking with metric. As to the latter, I thought I was being smart, but when I converted to all inches in the shop, life got a lot easier. I have a trimaran project in metric. You guessed it, the boat is called the "18", because it is 18 feet long. Every other measurement is metric. Great...