New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

What are you working on? Dec. edition

Posts

What are you working on? Dec. edition

#1

What are you working on?  Dec. edition

Bill Tindall

Well its almost Dec 1. Thought today was Sunday. The perils of retirement.

Tis the gift giving season. I am working on a plant stand, and some turned ornaments and a bench for son in lay. And learning to do line and berry. Looks simple when seeing it done. I'm finding that some experience is required.

Re: What are you working on? Dec. edition

#2

Robert Tutsky

Re: What are you working on?  Dec. edition

Robert Tutsky

Hi Bill,

We all have those senior moments from time to time. And speaking of time, if my computer didn't show the date I wouldn't know what day it was either. If you don't have to be anywhere at a certain time... who cares anyway?

As far as working on things, I have been jumping all about lately. Major project is a wall mounted tool cabinet. I have a small one room shop and even wall space is at a premium so I have to find ways to cram as much as I can into a small cabinet. Looks like I'll have to fashion a bunch of do-dads to hold the tools.

Next is I just received a Stanley #5 in the mail today and it needs the full gamut of fixing. Looks like the plane was sent to me just after it's last use with a few shavings still clinging to the throat. Can't understand how it even cut wood though, the iron looks like it was sharpened using a cinder block. Oh well, I enjoy tinkering with the planes anyway, in hopes of getting them to work correctly.

In my other life I'm graphic designer and have been using Adobe Illustrator to design and plan out my projects as I go and it works for me. Been using Illustrator since it's inception (Illustrator '88) and the program is like a pencil in my hand but for woodworking it has it's shortcomings. So, the latest (ongoing) project is learning Google's Sketchup. I think that's the best route to take for designing anything wood related.

Next are making some carving knives to add to my collection. I like carving smaller objects and during the process I envision the next carving knife that would make the carving process more efficient. For now I've got a few blanks ready for heat treatment to mount in their handles.

Lastly I am working on another marking gauge. A small one, as I usually build on a small scale. I picked up some nice walnut and gaboon ebony and thinking of using those woods for the gauge. Never used ebony before and it's going to be interesting to see if I can even work with ebony, that wood feels like hardened steel.

Anyway, that's what I've got going presently.

Re: What are you working on? Dec. edition

#3

Jack Guzman from Maine

Re: What are you working on?  Dec. edition

Jack Guzman from Maine

Cleaning up the shop in preparation for snow.Once the snow falls,I'm inside for the season. Alot of furniture repair projects to get out of the way .I really need top get back into chairbuilding.I haven't picked up a drawknife in months.---Jack

Re: What are you working on? Dec. edition

#4

Re: What are you working on?  Dec. edition

Ron Harper

For Christmas

Bedside table Arts and Crafts spindle side

2 small pic frames from a recent FWW article by Christian Becksvoort,

Celtic initial carving.

2 clocks ala Paul Sellers

For the shop

Storage for my planes ... found a wonderful idea on Pinterest

40 inch by 24 inch joinery bench

Redo storage for chisels.. Making some of Bob Easton's racks

New leg vise for planing bench

Rack for layout tools

Rack or hammers and mallets

Unlikely to complete in December.

Ron a Kokomo Galoot

Re: What are you working on? Dec. edition

#5

Re: cherry "TV" trays & small end table


Re: What are you working on? Dec. edition

#6

Robert Tutsky

Hey Ron re 40 inch by 24 inch joinery bench

Robert Tutsky

I am curious about your thoughts on a bench that size (40 inch by 24 inch). I am thinking along those lines for a bench for myself as a main bench. I won't be building larger pieces anymore because of my shop's small size and on a third floor of a building. Knowing my situation do you have any recommendations for a smaller bench? Presently I was thinking of a 30 x 48 bench top size with end and side vises. Thanks.

Re: What are you working on? Dec. edition

#7

Re: Hey Ron re 40 inch by 24 inch joinery bench

Ron Harper

Is the back six inch dimension for a tool tray? It is totally personal preference issue, but I think 24 inches is plenty for a work bench depth. Your 48 inches would work for me if I did better planning. I tend to leave a bunch of stuff laying round while I work.

I am doing this to optimize the height or the planing function, and making a place for joinery and carving. I could adapt to the "bench on bench" option. But my floor space allows me two benches.

Re: What are you working on? Dec. edition

#8

Robert Tutsky

Tool tray...

Robert Tutsky

Yes, I think a 6 or 8" tool tray would be a good idea. I could incorporate a "cap" for the tool area making an overall flat surface for clamping or whatever. My other shop had lots of sq footage but now I realize that I spent a lot of time looking for misplaced tools so I purchased multiples of tools so I could have them in every corner of the shop. Can't do that where I am now. That's the beauty of a small organized shop though... everything is within a general area and easy to find.

Re: What are you working on? Dec. edition

#9

I won't have another one.

Ron Harper

Again, it is a matter of personal preference. A tool tray encourages untidiness and catches shavings on my current bench. My joinery bench will have a 3/8 in slot along the back for chisels and saws I will need again soon. I store most of the rest of what I need in my shop apron. If i need planes at my joinery bench (of course I will) they will go on. Shelf below the work surface.

Re: What are you working on? Dec. edition

#10

Encourages untidiness?  HAH!

Bruce, a MN Galoot

I have one, I like it, but mine virtually demands untidiness. It must because it sure seems to happen a lot.

Re: What are you working on? Dec. edition

#11

Cleaned mine tonight.

Ron Harper

Would not have been shocked to find a gerbil

Re: What are you working on? Dec. edition

#12

Robert Tutsky

Cleaning is a virtue

Robert Tutsky

Was a time where I spent way more time drilling, sawing, sanding, planing, etc with no care of the droppings, chip flinging or dust control. The only major cleanup was a designated area for finishing. I eventually found that a messy shop began to affect the creative process and the overall quality of the project itself.

The creative process needs a clean slate as often as possible. It not only clears the bench and the mind, but opens new directions for the creative process and there is an open time for a reflection on what you are trying to accomplish. You must clean as you go, otherwise you'll find yourself fumbling with all sorts of things.

Re: What are you working on? Dec. edition

#13

Amen

Ron Harper

There are some folks who can do amazing work in the midst of chaos. I have to have some order. Since switching to primarily hand tools there are a lot more plane shavings on my bench. Gotta deal with them or I can't work.

Re: What are you working on? Dec. edition

#14

Re: What are you working on?  Dec. edition

Derek Cohen (in Perth, Australia)

Let's see, I have yet to finish the box for the plough plane. The hinges I ordered arrived but they are tiny and seem too small to carry the load of the lid, which will have blades in French inserts.

Still carving out the inserts ..


Not getting much time in the shop as I rush to complete a pile of psych reports before I leave for a holiday in the States and Canada from December 18th. I did begin a bunch of marking knives as Christmas gifts, some of which have interesting woods, new to me. One in particular was a real bear to turn - Black Palm. This is really a grass, and needed a really sharp edge to avoid breaking up. Never mind pine end grain, try some Black Palm! :)

Here is what a blank looks like ...


I'll post pics of the knives once they are done.

Regards from Perth

Derek

Re: What are you working on? Dec. edition

#15

Robert Tutsky

Dang you sure do work...

Robert Tutsky

with some interesting woods.

Re: What are you working on? Dec. edition

#16

Re: What are you working on?  Dec. edition

Paul Dzioba

The boys and I will be carving some Christmas ornaments (my nephew and girl friend's boy, both 12 year olds). The boys made their own carving knives under my supervision. They did all the work on their own after I demonstrated. They did the grinding, heat and quench in oil, tempering, and the final honing. They made the handles and we glued the blades in with epoxy. I was delighted on how well they listened an how quickly they took to a variety of tools.



With the abundance of wood from hurricane Sandy we hope to make some 'Follansbe' type boxes and spoons.

Paul Dzioba

Re: What are you working on? Dec. edition

#17

Xmas gifts of course

Patrick Gibbons

I have completed so far a bench that I adapted from an article in an old American Woodworker put out under Ellis's watch. I've also completed two colonial-style knife boxes. I'm still working on three jewelry boxes. I hope this picture comes through.


img

Re: What are you working on? Dec. edition

#18

Re: What are you working on?  Dec. edition *LINK*

Paul Dzioba


I completed this small dressing mirror a while back and donated it to the Warwick Township Historical Society. They have an annual reenactment of the encampment of the Continental Army during 1777. A few friends and I demonstrate period woodworking to the public during the reenactment. I worked on the dressing mirror this year and last and completed it at home, all with the appropiate hand tools only. I think I have about 25-30 hours in it. The wood is walnut.

Paul Dzioba


Moland House

Re: What are you working on? Dec. edition

#20

A beautiful mirror and.....

roger lance

I've got a request to build a full length mirror.....no, not so I can look at me !

Re: What are you working on? Dec. edition

#21

Inspiring

Bill Tindall

I need one of these for the dresser I am making. Will you describe the frame joiner details?

Re: What are you working on? Dec. edition

#23

Re: What are you working on?  Dec. edition

eliot d

Making a sand tray. It's about 20 x thirty x 4 inches. Cherry sides that are 3/4 thick with MDF bottom and birch plywood lid. These are used for a kind of therapy often for children.

Re: What are you working on? Dec. edition

#24

Re: Inspiring

Paul Dzioba

Hi Bill,

There is a rectangular sub-frame that is put together with bridle joints. On the inside of the corners that are cut to a radius, I glued in a small glue block on a forty five degree angle. The sub-frame stock is one quarter inch narrower to provide a glazing rabbet. The top frame that shows is about a quarter inch thick with a slight radius in cross section. I used my largest hollow plane, I think a fourteen, to ‘stick’ the stock. The top frame is laminated piece by piece onto the sub- frame with simple butt joints. The upper corners are at a 45 degree angle, the profile is cut after being glued, and are then carved and scraped to match the radii of the top and sides. I used liquid hide glue. Hint: Drive a couple of brads so the points just protrude through the sub-frame for each top piece so that they don’t slide around. I used small spring clamps. Invest the time to make a scale drawing.

Paul Dzioba


Re: What are you working on? Dec. edition

#25

Re: Inspiring

Bruce, a MN Galoot

That's really nice! Question, though, how do you prevent the mirror part from rotating? Just friction?