Snipe Hunt
William Duffield
I've been sticking mouldings* on and off for several years, sometimes with a tablesaw and router and lots of sandpaper (Ugh!) and more and more often with my hollows and rounds. However, most of the recent mouldings have been architectural trim for Victorian gingerbread (another Ugh!), and my methods have been less than satisfactory to me. The customers don't mind the 30-30** quality, as they are going to cover them with lots of paint anyway.
In the quest to improve my process and the resultant mouldings, so that I might apply them to fine furniture, I have recently begun a quest to improve my tool set. While I've owned a half set of English middle pitch hollows and rounds for many years, and also rabbets, ploughs and side beads, they're's just not sufficient for what I want to build. I've studied Don McConnell's videos (produced by Lie-Nielsen), followed Matt Bickford's Musings from Big Pink blog, searched the reputable old tool dealers' offerings on both sides of the pond, and recently received Moldings in Practice from Lost Art Press. I need a pair of snipes bills and a pair of side rounds. However, the Schwarz Effect has kicked in with a vengeance, and once esoteric, misunderstood and undesired wooden molding planes have vanished from the face of the earth. I can still remember, a few years ago when I had no idea what they were useful for, a friend walking beside me and picking up a pair of snipes bills off a gravel and grass parking lot and paying a trifling amount for them.
I've recently contacted Larry Williams and Matt Bickford, who both make snipes bill and side round planes. As if their prices were not dear enough, their lead times to make me some new ones range from several months to a few years.
I'm beginning to think I'm desperate enough to try to make my own, but then I'd have to find some seasoned quarter sawn beech, acquire plane floats, and harden steel in sizes beyond the capacity of my minuscule forge and propane torch.
Can anyone offer suggestions to where I might turn for an easier, quicker solution?
* You have to delete the "u" if electrons die in the process.
** 30 MPH @ 30'







