New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

"What Are You Working On"- new WC feature

Posts

Re: "What Are You Working On"- new WC feature

#26

Ellis Walentine

Not as much as I'd like to

Ellis Walentine

This picture frame is the only finished product that has come out of the shop in recent days. I'm trying to beg the time to start a fairly major project, though. Promises promises.

Ellis

PS, the photographer is an old pal from my American Woodworker days. You can view some of his photos at http://www.donschroder.com


Re: "What Are You Working On"- new WC feature

#27

keep us posted

Bill Tindall

I would like to also make some sort of outdoor table with a rock top. Joinery that will hold up has kept the project at bay.

Re: "What Are You Working On"- new WC feature

#28

handsome table- question on finishing

Bill Tindall

How do you intend to finish it? I faced a similar problem of finishing mahogany and satinwood and was not pleased with the result.

Re: "What Are You Working On"- new WC feature

#29

Re: Shop Upgrade - CAUTION Power Tool Content

Bill Tindall

I suppose the big drawer is for stuff like drills and the like.?. I like that idea as mine are in a jumble on a shelf.

Re: "What Are You Working On"- new WC feature

#30

Re: "Construction Methodology Question

Tony - Memphis

Well, in short, I guess I'm not a slave to what is "typical." I'm not trying to create a copy of anything. I couldn't have told you this is Federal, I don't tend to label or caterogize my work in to a period or style. This is just something I came up with. With all that this table has going on, I think reeds would have been too much. Maybe not for some. To each his own. As for the joinery, I didn't put a lot of thought into it. I use m&t a lot, so that's a natural way to go for me. I wasn't concerned with the inner surface. It did come out pretty decent off the bandsaw though. I might do that for the outer surface next time. I routed each layer using the previous layer as aa template. Had some tearout in the poplar. I made the skirts in two pieces to make it easier, then cut them in half. I did think to myself that the joinery wouild have been easier had I done two legs lapped and two M&T. Live and learn! Fitting 8 m&t into a cirlce is not easy.

Tony

Re: "What Are You Working On"- new WC feature

#31

Re: handsome table- question on finishing

Tony - Memphis

The base will be stained with water based dye. I use Lockwood - a red followed bhy a brown (can't recall the names). The top will receive no stain. I'll probably finish the top first (I've tested some finishes and Minwax Antique Oil really brings out the figure in the makore and the satin wood). The makore come out a nice brownish red and I'll try to match that best I can. I'm not really worried about it all matching perfectly. I don't see the need for that. I made a dresser using the same combo of mahogany and with the dye, it all matches pretty well. I made a small table a few years ago with mahogany crotch and satin wood and it really dances as you walk by. I will top it off with a gel poly for protection.

Tony

Re: "What Are You Working On"- new WC feature

#32

Re: handsome table- question on finishing

Tony - Memphis

Sorry for the poor pics, but here is the little table with the satin wood cross banding and crotch mahogany. Not sure what I used for finish, but I'm sure it was probably something oil based and some poly in there somewhere.

The dresser is solid honduran and quarter sawen african veneer. The colors matched up pretty well using the Lockwood dye stains (direct or from Lee Valley). Pretty sure I used Rockler gel poly on this one. Not thrilled with the design, but the striped mahogany is real pretty.


Re: "What Are You Working On"- new WC feature

#33

Correct, Bill

Hank Knight

Hi, Bill,

The two deep drawers in center are for hand-held power tools - drills, routers, sanders, etc. Mine have been scattered around my shop for years. It will be nice to have all that stuff together and handy in one place and out of the way when not in use.

Hank

Re: "What Are You Working On"- new WC feature

#34

Re: Not as much as I'd like to

Hank Knight

That's a beauty, Ellis. I love the tiger maple. How did you finish it to accent the figure so nicely?

Re: "What Are You Working On"- new WC feature

#35

Re: Shop Upgrade

roger lance

Hank.....that is a great shop up-grade....drawers not only give an opportunity for increased shop organization but also keep tools dust free.....full extension slides are another plus.....I'm also a fan of the RAS....I built my house with mine and would not be without it....looking forward to pics when all is completed.

Re: "What Are You Working On"- new WC feature

#36

That picture solved a problem...I hope

Bill Tindall

I was worried about oil "yellowing" light banding and stringing. Actually it looks like it warms it and winds up pleasing. I will experiment with oiling the line and berry on walnut I am working on.

Re: "What Are You Working On"- new WC feature

#37

Ellis Walentine

Minimal finish

Ellis Walentine

Hi Hank,

Thanks for your kind words. This frame is finished -- if you want to call it that -- with a couple sprayed coats of Krylon Matte Spray, sanded lightly through 600 grit and then waxed with Goddard's furniture polish.

Picture frames don't get handled or abraded, so there's no great need for a film finish, besides many of my favorite furniture finishes, e.g., Waterlox and other varnishes, impart a color cast to the wood. The matte spray just seals the surface without changing the color, and it provides an excellent base for a wax finish.

Ellis

Re: "What Are You Working On"- new WC feature

#38

Re: Minimal finish

Hank Knight

Thanks. It's beautiful.

Re: "What Are You Working On"- new WC feature

#39

Re: Minimal finish

Bill Tindall

I didn't think one could get that depth without some colorant or oil. It looked mighty fine to me.

Re: "What Are You Working On"- new WC feature

#40

Re: It has some practical advantages

Derek Cohen (in Perth, Australia)

Hi Bill

I have a large steel Stanley framing square that inevitably causes mischief. It lurks in the corner sulking. I find it is limited in its usefulness for cabinetry. A large square is useful to check adjacent sides of cabinets, but why leave it there when a fence will turn it into a drafting tool as well?

Regards from Perth

Derek

Re: "What Are You Working On"- new WC feature

#41

Re: A new jig completed.....

roger lance

For many, many years, I've been using a 'panel cutter" jig fashioned after one by Norm Abram but a recent discussion here on cutting tenon shoulders more accurately inspired me to make one of these....


now back to that outside work......

Re: "What Are You Working On"- new WC feature

#42

I noticed an unmentioned feature

Bill Tindall

The guides stick out the back of the sled. An oversight? Likely not. When I made mine I left the guides long intending to cut them flush when all was assembled. Well, like many things I didn't get around to it. And then I discovered that getting the thing aligned on the table is greatly facilitated by having them stick out the back like you have them. The back edge of my large sled gets wiggled around until the ends of the sticking-out guides fall into the table slots and then the sled can be lowered onto the table.

I have what I think is a precise easier way to set the fence perpendicular to the sawed slot which I will post on the main main Forum.

Re: "What Are You Working On"- new WC feature

#43

completed jig....

roger lance

I leave the sled runners protrude both front and back for easier registration with the tablesaw slots and also a little more stability before/after the cut....


Note the little grove on the back of the sled's right side which was used to adjust the fence to square with a screw on the left functioning as a pivot point. The old N. Abram's panel cutting jig is in the background.

Re: "What Are You Working On"- new WC feature

#44

Re: handsome table- question on finishing

TomD

Mahogany is a classic guitar wood. There are a lot of techniques for getting the high build finish you seem to like. Most guitars have at least a mahogany neck. And some have just about everything other than, or even including the soundboard.