New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

"What Are You Working On"- new WC feature

Posts

"What Are You Working On"- new WC feature

#1

"What Are You Working On"- new WC feature

Bill Tindall

As discussed a while ago the "what are you working on" topic heading will be posted periodically with the objective of encouraging WC visitors to post a picture or discussion of what they are working on.

I would like to encourage some breadth for this topic. Stu might discuss some new tool company he discovered, Warren a historical discovery, Kees a new video, well you get the idea.

Frequency: let us try every two weeks. So next post will be Sept 1. If there is minimal response then we will go to every month with the next post October 1.

Re: "What Are You Working On"- new WC feature

#2

Happy birthday Julia

Bill Tindall


In celebration of Julia's 100 birthday I made breakfast crepes with fresh peach filling.(this is not the most beautiful crepe I ever made but it was what was left when I got the idea for the picture)

I hope to glue up the case for the chest of drawers today. In my enthusiasm to get it assembled I almost forgot to make and install the runners. Thankfully I have learned to ALWAYS dry fit before gluing and it was at this step I noticed the absence of anything for the drawers to ride on.

Re: "What Are You Working On"- new WC feature

#3

Follow up to report on the Perth Wood Show

Derek Cohen (in Perth, Australia)

In recent years I have joined Chris Vesper on his stand when he comes to Perth for the bi-annual Wood Show. Each time we make a bit of a spectacle, either with a competition or a demonstration. This time I suggested making a wooden layout square (ala Chris Schwarz). Well I thought it in keeping with Chris' marking and lay out tools.

We got started on the second day with a few lengths of Marri. These needed to be hand jointed ... basically everything was handmade with the exception of roughly slicing the boards down the centre with a bandsaw. Rasps for mouldings, dovetail saw, chisel and router plane for the half-lap joints. LV LA Jack to joint and finish. All held together with glued lap joints.

It took more time than we realised - customers come first. I managed to finish half at the time, and then completed the remainder over this past weekend.

This is a little different to the square of CS as I have added a fence on one side. This permits it to double as a layout square and set square. Each leg is 21" long.




This weekend I have another jointer plane to complete, and then I begin preparing parts for a desk.

Regards from Perth

Derek

Re: "What Are You Working On"- new WC feature

#4

Re: "What Are You Working On"- new WC feature

Howard Pollack

This is a great idea for a thread!

I'm working on a base for a piece of granite that will be an coffee table in my yard. No actual woodwork yet, just sketches to work out the joinery so far.

Re: "What Are You Working On"- new WC feature

#5

Re: Follow up to report on the Perth Wood Show

William Duffield

Very nicely executed, Derek.

In one of the classic texts (I don't remember which one >( ), I noticed an etching showing an enhancement to a square of this design. It had a hole drilled through the joint at the apex, with a string and plumb bob attached. The cross brace was graduated in degrees, like a protractor, so the square could also be used as an inclinometer when situated as in your last photo.

Chris would probably say something rude if he saw the phillips head screws you used to attach the fence. :D

Plans were published in the Dec, 2010 issue of Popular Woodworking, or are available as a PDF download for about $3, for anyone who would like to build one.

Re: "What Are You Working On"- new WC feature

#6

Re: Follow up to report on the Perth Wood Show

Hank Knight

Nice job, Derek. Your fence modification is a great idea.

Hank

Re: "What Are You Working On"- new WC feature

#7

Jack Guzman from Maine

Chairs and repairs

Jack Guzman from Maine

I am in the middle of copying a fanback Windsor for a client to match an existing chair she has. I have all the turnings done and the back is drying in the bending form. I just finished scooping out the seat. I got to use my new Crown hollowing plane for the first time. What a sweet tool. After I finish my lunch I'm headed back to assemble the legs and stretchers.

Also,I have three pieces of furniture in different stages of repair. Mostly waiting for glue to dry.

I almost forgot to mention,the doors to my wife's newly acquired hoosier cabinet are spread out in the shop waiting for the stripper to do it's job. Busy week.---Jack

Re: "What Are You Working On"- new WC feature

#8

A new jig....

roger lance

When I've been able to escape from yard work, I've been making a new sliding table jig for the tablesaw....


still need to modify the fence and add an exit block for safety.

Re: "What Are You Working On"- new WC feature

#9

Re: "What Are You Working On"- new WC feature

Tony - Memphis

I finished a couple of chairs this spring and they need a small table between them, so that's what I'm working on now. I have the base pretty much done. I've been working on the top. I wanted to do something with veneer and this is what I came up with. I had the veneer already (ebay - good deal). I'll try to post a picture. The field is figured makore and the banding is satin wood. I inlaid a dragon fly using dyed veneers and quarter sawn sycamore for the wings. We have lots of dragon flies in our yard and we think they are cool - that was my inspiration. I got the top glued up this weekend and got the tape cleaned off and did a little leveling. Now I have to make it round. I'm planning on using a router trammel that I made. A small puck with a 1/4" hole for the guide pin will be double stick taped to the center to guide the router. Hope that works! The picture of the base is before it was glued, that's why there are some gaps there...no, really! Oh, and there will be a small black dot in the middle of the table. I added the black inlay as an afterthought and that messes up the center. I was playing around with the triangles and the inlay and I liked the look. The bead under the skirts will be black and the "socks" on the bottom of the legs will be black too. The legs are Honduran mahogany and the skirt veneer is quarter sawn African mahogany (sappelle?). The skirts were brick laid using poplar and veneered in the vac bag.

Tony


Re: "What Are You Working On"- new WC feature

#10

Nothing like nearly as pretty as y'all

Bill Houghton, Sebastopol, CA

Currently reworking a room, converted after World War II by a homeowner who made up in enthusiasm for what s/he lacked in competence. The room previously had single-pane windows bracketing the fireplace, and looking out on Main Street and the backyard (we're three houses off Main Street). Main Street is not nearly as interesting now, when we have 7,000 plus people and a lot of folks commuting through town to work down in San Francisco, as it no doubt was after the war, when the town had about 2,000 people and a train running down the middle of Main Street. So we are, mostly, closing off the front windows, except for some small windows, including two with stained-glass panels bracketing the fireplace alcove, now to be a freestanding natural gas heater.

The back wall of the room will have large windows onto the back garden (two six-by-six sliders, total of 12 feet of view). This wall, naturally, bows in 3/4" over 17 feet - a problem when putting in a window wall. The joist structure was also...creative (including the rim joist resting on, but not nailed to, the girders that sit on the mudsill). So we're down to the foundation to built up a straight base, and debating how best to correct the top plate without ripping off all the molding we spent hours installing a couple of years ago, when we reworked the roof in that area.

The current state of the back wall is close to this, but, as of today, with more siding removed:


Hindu theology is right: creation cannot be separated from destruction. Certainly, in remodeling, both are necessary.

Re: "What Are You Working On"- new WC feature

#11

Re: "Construction Methodology Question

William Duffield

Typically, on Federal period tables of this type, especially demiluna tables, the legs are joined to the curved aprons with bridle joints. Yours appears to use mortise and tenons. Why did you choose this unconventional method? I realize if you bricked up the whole apron, since it is a full circle, you might not have any practical way to get your bandsaw blade in to saw the inside face of the aprons, but smooth inside apron surfaces are not critical to the design. Also, some people have a welding attachment on their bandsaws. And some of us might use a bowsaw or/and a compass plane.

And, a decoration question: Often, on tables of this style, reeding is applied to the turned legs. What considerations led to your decision to not do the reeds?

Love the dragonfly!

Re: "What Are You Working On"- new WC feature

#12

Re: "What Are You Working On"- new WC feature

William Duffield

"This is the WoodCentral Police!

"Put Down That Mouse!Keep your hands where we can see them.

"Move Away From that computer!

"Now, Walk to the shop! Build Something!

…Oh, and don't forget to take your camera."

Where are these guys when I need them?

Re: "What Are You Working On"- new WC feature

#13

Shop Upgrade - CAUTION Power Tool Content

Hank Knight

I have an wonderful old Rockwell Super 900 Radial Arm Saw that my father bought new in the late 50s. I use it for cutoffs and dadoes. For years I've had it on it's mobile stand, flanked by two benches which, combined, made a full length RAS bench against the wall behind my regular workbench. I liked the concept, but the realities were that keeping all three of the bench pieces aligned was like trying to keep a snake straight. It became one of those round tuit projects. Well, I finally got around to it. It's still a work in process, but I'm closing in on it. When I finish, I will have LOTS more shop storage than I've ever enjoyed before. Here are some work-in-process shots.

A "Before" shot - note the absolute mess under the RAS and related benches:


I trashed all of the exitstng stuff and I'm pretty well along with the rebuild. The new bench will be, effectively, one piece; so the alignment problems should be a thing of the past.

Ah, lots of drawers:



Hope to be finished in a week or so. While the RAS is "down," I've taken the opportunity to have the motor serviced -new bearings etc. It should be good for another 50 or 75 years. It's a great old saw.

Hank

Re: "What Are You Working On"- new WC feature

#14

Table and charging station 

Roninkokomo

Started an Arts and Crafts side table today. 18 in round top . Inch and. Half legs ..stretchers through tenoned at the bottom and dovetails into the top of the legs at the top. Cherry. Used my 605c and my 608c to true the two pieces that will make up the top. Ready to assemble a charging station for our iPads nooks phones, etc.

Trying to learn to carve. There is a link to a lesson/ carving that I did last night. Want to add carvings to a few furniture pieces

Fun to be back at it.


img

Re: "What Are You Working On"- new WC feature

#15

Re: Table and charging station 

William Duffield

Ron, your picture didn't show up. :( If you copy a link to a web page or a pic on the web and the address starts with http://, then you have to delete the http:// that's already in the Optional Link URL or Optional Image URL box. Otherwise (Don't click on the link!), you get http://http://, and that invalid syntax confuses your browser.


img

Re: "What Are You Working On"- new WC feature

#16

Thanks Bill


Re: "What Are You Working On"- new WC feature

#17

Ellis Walentine

Fixed the original

Ellis Walentine

If you ever post a picture and it doesn't show up for some reason, send me a note and I'll fix the original post if possible.

Nice carving, by the way. Thanks for posting.

Ellis

Re: "What Are You Working On"- new WC feature

#18

I hadn't seen that Crown hollowing plane before

Bruce, a MN Galoot

Is it easier to work than a travisher? I have a difficult seat to hollow out (birch), and I'm looking for an easier method than to develop the skill than Curt Buchanan displays.

Re: "What Are You Working On"- new WC feature

#19

Jack Guzman from Maine

Short answer- yes

Jack Guzman from Maine

I roughed the seat out with my scorp and once I had the shape roughed in I took the plane to it. It easily took down all the ridges and I had no trouble taking a shaving in any direction. It left a rough surface against the grain but it still was effective in leveling the surface. I think if I pay more attention to grain orientation I'll get a smoother surface but I follow it with the travisher and all is well. The plane makes the process alot easier.---Jack

Re: "What Are You Working On"- new WC feature

#20

Thanks for the compliment

Roninkokomo

Coming fron you, it means a good bit to me.

Thanks Ellis

Ron

Re: "What Are You Working On"- new WC feature

#21

Finished a batch of grips

John in NM


Picture is of three stages of carving, bandsaw the shape after it is fitted to the metal part, rough out with an angle grinder & 24 grit disc, then finish carve with a Foredom tool. I sand them to 80 grit before shipping, the eventual customer gets to sand and finish to their taste.

Also working on some sheetrock in the future guest room, started making cabinets for it's mini-kitchen, and put up some handy shelves in the shop.

Re: "What Are You Working On"- new WC feature

#22

craigd

Learned to make cupids bows

craigd

In metal for mitre planes. But I used only hand tools to make them (well, the buffer eats electrons).


Re: "What Are You Working On"- new WC feature

#23

WOW!

Bruce, a MN Galoot

That's going to be a very spiffy looking miter plane, Craig. What are the dimensions? I was lucky enough to fondle one of Wayne Anderson's miter planes (a mini) a few years back at a MWTCA meet.

This is one of those things that I'm just going to have to do. Work like yours is a great inspiration!

Re: "What Are You Working On"- new WC feature

#24

craigd

Re: WOW!

craigd

Thanks!

Dimensions are 5" x 1 3/8" x 1/4" sole, the shell is about 1" tall, blade is 7/8" wide (a cut in half Sargent bench plane iron) bedded at 20º. Wedge angle is 7º. Just over 1# of steel. Not sure what I'm going to use for wood yet.

Wayne's planes (now that would have been a sweet company name) are soooo beautiful and inspiring. In fact, I got the "sole wider than shell) idea from his "old style theme".

Re: "What Are You Working On"- new WC feature

#25

It has some practical advantages

Bill Tindall

In addition to its attractive look, that square has some practical merit. The alternative, a framing square, has two disadvantages by comparison- it is heavy and it can scratch stuff. As a result I rarely use it even when I should.