New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Curly maple

Posts

Re: Curly maple

#26

Re: Curly maple

Wiley Horne--So. Calif.

Hello Ron,

Welcome to retirement land! Retirement is about charging in a different direction. Or two or three directions. Whatever. So charge! And send pictures of the cabinet doors. We need to see em.

I personally believe that shop furniture is a great place to prototype ideas. Those cabinet doors may show up--in refined or related or even opposing form--elsewhere in your home. Go for it!

Wiley

Re: Curly maple

#27

Re: Curly maple

CStanford

Yep, oak is definitely furniture wood. And they used to use Cuban mahogany to make railroad ties so your Jarrah roof components don't get a pass.

As far as the figured maples goes - I can reliably lay my hands on that species easier than I can good white pine. I've used tiger maple for drawer sides because I had some drawers to build and I had tiger maple within arm's reach with no wait. All in a day's work.

Unlike money, wood does grow on trees.

Re: Curly maple

#28

David Barnett

(Message Deleted by Poster)


Re: Curly maple

#29

Re: Society could now afford a Ruskin and a Morris

TomD

Yeah, it was a transitional stage replaced by one, at least in part, in which people could afford to have junk. Modern america without a good bootmaker in sight.

Re: Curly maple

#30

Tempest in a teapot......

roger lance

I believe that, in general, really exceptional woods are sold at high prices by people well aware of their value and that, in general, purchasers of these highly valued woods use them in specific, creative, and "appropriate" ways. I, for one, will move on to find something else to worry about.....like dangling a preposition at the end of an idea/sentence.

Re: Curly maple

#31

$1.80 bdft if you are in the neighborhood

Bill Tindall

While white pine is more often associated with the northern states, it grows exceptionally well in the Appalachian Mts. Because stuff rots quick here the pine sheds its shaded limbs quickly and makes clear logs. I can buy unlimited quantities of FAS white pine from one of our former supplies for $1.80/bdft.

Re: Curly maple

#32

Re: Tempest in a teapot......

TomD

I think that is probably not true, at least based on the number of brazilian walnut bic lighters I have seen. That is far more my worry, than it is what I do with it. I probably can't use up enough premium cedar in boats and guitars in a lifetime to add up to one fairly rambling, and not likely to be kept more than a decade, "custom deck".

Re: Curly maple

#33

Re: $1.80 bdft if you are in the neighborhood

CStanford

Could be time for a road trip Bill. Where do you live?

Thx.

Re: Curly maple

#34

Re: Fancy schmancy figured wood

CStanford

I didn't know you are an instrument maker... doesn't get much more exacting than that!!

Re: Curly maple

#35

Wood prices

Bill Tindall

Transportation costs for lumber are not great at the wholesale level(truck load to car load quantities). Hence, there are not great differences in the wholesale price of lumber around the land. Appalachian hardwoods will be a bit more in CA than in eastern TN where I live, but the main difference in prices depends on what sort of place you would be buying from. There are a lots of links in the food chain between the logger and Woodcraft.

Any local place working hundreds to thousands of bdft of lumber a year will be buying lumber for about the same price that I can and this would include any cabinet or custom mill work shop. You must be willing to buy by grade and in 100 bdft or so quantities but a company selling 100 bdft of lumber to a cabinet shop will likely be willing to sell anyone the same quantity at the same price.

For example, Gilbert Lumber company out of SE TN, ran trucks once a week around a several state area delivering lumber to shops and retailers or anyone else that set up an account with them. Gilbert over bought logs and went bankrupt in the housing collapse but someone will have taken their place. I think the new company comes out of Ronaoke, VA. and provides the same service, for example.

The next step back on the food chain is the distributor. Here you will need to buy a minimum of a pack of lumber (500-1000bdft) and have a truck to haul it. These places are located near where the trees grow. Mills will typically sell lumber but you will have to dry it. Pine is trivial to dry.

Re: Curly maple

#36

Re: Wood prices

cstanford

I'd be tickled to have contact information for the specific mill you're using for the white pine.

Thx.

Re: Curly maple

#37

Re: The Irving White Pine Added Value Centre

TomD

That's the huge sign on the local sawmill. And they have a point because backs and sides for guitars can easily cost 200 in curly. That is about 15-20 times the bft price. So there you go, should it be made into cabinet kicks just because you can at that price? No problem from my end.

Some of you in Maine may know Irving. They do have clean bathrooms in their service stations.

Re: Curly maple

#38

Re: Tempest in a teapot......

Bruce, a MN Galoot

Is that your boat in the pic, Thom?

Re: Curly maple

#39

For Wiley, Bill, Derek, and David

Roninkokomo

SWMBO and I are getting our house ready to sell with a view to getting something smaller as the kids are gone. So, though it is certain that I will have shop space, how much is up in the air. So my Roubo bench and my new tool storage set up are on hold till I know how much floor space and wall space I gave. I may very well build a cabinet or two soon, as I am certain to have some wall space.

My shop is a very special place for me and my tools are highly respected ( yes I do have too many). So I will make my shop look nice by designing good looking useful tool storage. And a killer bench. I have a pretty nice bench now that I made 15 years ago. But I have the Roubo disease..and I gotta make one. Thanks for understanding that and not accusing me of squandering the bounty of the forest for using a little curly maple in cabinet trim.

Ron

Re: Curly maple

#40

not being judgmental, just providing  data

Bill Tindall

We kept the big house. It is nice to be able to provide a place for children and grand children to visit various times during the year. I haven't built anything for myself in years. Children and grandchildren appreciate my furniture and trinkets so I am devoting all my building time to making stuff for them.

Re: Curly maple

#41

We have thought about it


Re: Curly maple

#42

You`re in good company

Bob Hackett

I`ve posted in the past about how many of the joiners in the boatyards up here used their tool chests as proof of their talents. Extravagant wood and inlays abound on these highly sought after antiques. In order to see the true skill involved you had to open the box as it was all inside. The outside was a simple painted box, like something used for shipping or storing of shipyard goods.

Seems to me your proposed tool storage plans uphold tradition on several levels. I say go for it (as long as we get to see pics of the results).