New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Curly maple

Posts

Curly maple

#1

Curly maple

roninkokomo

I love this wood. It is a serious challenge for a furniture maker because it is so imposing. It requires restraint. I just put some finish on some that I bought from Pete Taran's dad's place 25 years ago. I am going to use some more of it as trim on my new tool storage cabinets in my new shop, when I get moved. Gonna make the cabinets from poplar painted British Racing Green and trim the doors with some of this wild maple finished with clear Maloof finish.

Ron a Kokomo Galoot

Re: Curly maple

#2

exceptional wood deserves a better fate

Bill Tindall

While I subscribe to the idea that one can do as one wants with ones property I also subscribe to the notion that the bystanders can have an opinion on the decision.

We sold lumber for many years. I believe that special lumber deserves a fate in keeping with its rarity and beauty. It took 100 or more years to make and it should survive for another 100 or more years made into something. When we found a piece of special lumber in a pack from our supplier it was set aside and sold for some special application. Maple with a nice curl is not common. When we did receive some it became mandolin backs, or the occasional jewelry box, a side table or some such.

When preparing the inevitable rebuttal to this post focus on the point I made(second sentence second paragraph), not whether or not one can do as one wants with ones lumber, which I acknowledge.

Re: Curly maple

#3

Re: exceptional wood deserves a better fate

Patrick Gibbons

There are worse fates. At one time Cuban mahogany was made into railroad ties. Ron's use is furniture.

Re: Curly maple

#4

Re: Curly maple

cstanford

I'm not sure at all about its 'rarity.' It's not that hard to find.

Build what you want to build with it.

Re: Curly maple

#5

Re: Curly maple

McKay

I believe that ones environment has a direct influence on ones creativity. My shop should reflect the quality of my work. Yes, I could get by with a PB top on my work bench. But why? My work environment should stimulate and encourage me to do even better work. Kudos to those who make shop cabinets to the greatest quality as the finest table, chest of drawers....etc.

Re: Curly maple

#6

What we need is an international wood

roger lance

board that is empowered to allow the use of certain woods for certain projects.....there should be permits issued to allow a project to proceed and stiff penalties for violators....please....remember that part of the allure for working in wood was independence and creativity ??....doing what you want....doing what you are capable of....personally, I would not use curly maple as proposed; but then, I would not be interested in serving on the international wood commission either.

Re: Curly maple

#7

Re: Curly maple

John in NM

I like the painted look with oiled moldings, should look great.

Re: Curly maple

#8

David Barnett

(Message Deleted by Poster)


Re: Curly maple

#9

You just had to remind me!

John in NM

Shop I used to work for once made a mesquite toilet seat, I'd forgotten all about that low point :D

Re: Curly maple

#10

I prefer a "crotch" pattern for this application

Bill Tindall

but "quilted" maple is more comfortable.

Re: Curly maple

#11

Re: exceptional wood deserves a better fate

Curt Putnam

I still have a hard time believing that there are woodworkers who do not have a deep reverence and appreciation for wood.

Re: Curly maple

#12

Re: exceptional wood deserves a better fate

TomD

Really, it is a matter of appreciation for people. The wood doesn`t care whether you put the curly stuff in a toilet seat or not. If anything, a lot of the wood we like in the west is sorta like wood tumours. So when it comes to revering the likes and dislikes of other people, and not wasting what they value scarcity comes into it a lot. And you can`t please everyone. Mondolins, yuck. And not likely to last out the century in most cases.

The Tarant wood was the nicest I have seen of the type. On the other hand, I once stayed in the Asian Pacific Hotel in Vancouver, Can., and he whole thing was at the time wallpapered in birdeye maple. Nice look, so you know that is all going to end up in the dump as soon as they find a dollars to square foot, occupancy ratio they like better. Thousands of square feet.

I pretty much agree with Bill, though I can`t be sure that Ron`s cabinet won`t rise to that level, unless the level is highboy or nothing.

Re: Curly maple

#13

Re: Curly maple

CStanford

There's a fairly long-standing tradition by professional cabinetmakers in lavishing a little wood and extra effort on shop cabinetry, workbenches, etc. with the idea that they will inspire customers and clients who see them. There are plenty of examples over the years of this very thing in all the major woodworking mags.

You won't be the first guy to use a bit of nice stock on shop cabinets. I don't know if you ever make money with your woodworking, doesn't really matter. If you want to surround yourself with nice shop furniture then by all means do it.

Re: Curly maple

#14

Wow

rononkokomo

This discussion took an unanticipated turn. My decision to trim my cabinets with fine wood is an indicator of the respect that I have for my tools. I guess I could make them outta OSB. .

Ron

Re: Curly maple

#15

Re: Wow

roger lance

Just make sure that its not A1, primo OSB....but second grade stuff....which you could trim with pallet wood....you can't keep all of the people happy all of the time....but then again, you really need to just keep you and yours happy :D .

Re: Curly maple

#16

New invention

John in NM

Fiddleback OSB... gonna make a million :D

Re: Curly maple

#17

David Barnett

(Message Deleted by Poster)


Re: Curly maple

#18

Re: I used very beautiful, dense 12/4 & 16/4 walnu

TomD

Yeah stuff sure took an interesting turn when these pretentious ideas got a hold of everything. Don't get me wrong it is a lot of fun playing around with ideas, however. Still when one has to go there just to do what one wants, one must have passed some threshold of population where all of a sudden there were just too many people with a nose in on just about everything. That's the cool thing about boats, and epoxy. You could make something like this:

http://proafile.com/images/reviews/spark1.jpg

out of wood you would not consider for almost anything in a cabinet shop, to go out of, or stay behind the door.

Re: Curly maple

#19

David Barnett

(Message Deleted by Poster)


Re: Curly maple

#20

Re: Curly maple

Richard Jones

What a great way to enjoy both gorgeous wood and your own work than to see it and appreciate it every day. Would love to see some pics when you get done. I just love nice tool cabinets, and strange as it may sound, much more so than a lot of furniture that I see.....

Rich

Re: Curly maple

#21

Re: Curly maple

Derek Cohen (in Perth, Australia)

I love this wood.

Ron, that says it all.

Earlier I wrote that I personally would not use furniture grade wood in a shop, then deleted the post as I reflected on this and decided I was wrong.

The best that we can hope for when we come across special wood is to have the opportunity to use it and have it close by us every day. Whether this means it is used as furniture in a home or as furniture in a shop, well I cannot see the difference any longer - both are places of pleasure, and where you spend important time.

Please post pictures when you are done. Enjoy.

Regards from Perth

Derek

Re: Curly maple

#22

Re: Curly maple

CStanford

I saw your deleted post and wondered if you'd somehow forgotten about the bench you just built. It looked like furniture grade wood to me. And a whole lot of it.

Re: Curly maple

#23

Tool Bins Too!!


Re: Curly maple

#24

Re: Curly maple

Derek Cohen (in Perth, Australia)

Well Charles, I guess the Oak top could be considered furniture grade, although the beams I had bought were not considered so for furniture use. They machined up well. The Jarrah base was made from recycled roofing rafters. The legs were laminated to obtain the thickness, etc etc.

It matters little anyway. I deleted my post because I considered my knee jerk reaction the reaction of a jerk. Who am I to say to someone what should be used? Or how they should use it? It has nothing to do with me how others find pleasure and use their time or spend their money. It is more important that they do find pleasure, and I hope I will always be supportive rather than obstructive.

And I noted that you were supportive as well. You big softie :)

Regards from Perth

Derek

Re: Curly maple

#25

A thought

Bill Houghton, Sebastopol, CA

Lots of kitchens wind up with really fancy woods as cabinets or trim. At one time, kitchens were utilitarian places, because they were seen as working spaces.

Now they've become one of the semi-public rooms in the house, even as public rooms, and the design and decoration of a kitchen has to include both the utilitarian elements of the kitchen and the public-display elements. So we wind up with very fancy kitchens.

In spite of the fact that, at parties in many families, the woodworkers/auto mechanics/whatever the trade wind up out in the shop, admiring the owner's latest work and telling stories and/or lies, shops are still perceived mainly as utilitarian places.

Maybe, for woodworking shops, it's because the shop is used to make the furniture in the shop, and so it seems like a fancy shop is feeding on itself rather than producing for outside the shop. If kitchen cabinets were made from cabbage, we might find using rare, high-end cabbage for cabinets rather than for salads or sauerkraut offensive.

Me, I think if Ron wants to use the curly maple on his shop furniture and gets pleasure from seeing/touching it while he's working, he should; and I say this as someone who'll never get around to putting even pine trim on the edges of the plywood box that forms the base of my workbench.