Re: Nails
Bill Tindall
Drawer runners were often nailed to the cabinet sides in Period pieces. Moldings were often nailed on. A trip to any collection of fine antiques will reveal nail usage.
Knowledge You Can Build On — Est. 1998
Re: Nails
Bill Tindall
Drawer runners were often nailed to the cabinet sides in Period pieces. Moldings were often nailed on. A trip to any collection of fine antiques will reveal nail usage.
Re: Nails
TomD
Yeah same here. However the fact that it dates from the 70s does not make it irrelevant. We are all in the slipstream of a movement to rediscover a modern purpose for wood furniture and high end craftsmanship. And we also have the results of a few more hundred years of furniture conservation, consumer preferences, whatever.
Re: Nails
Robin Corell in Atascadero CA
It is also those nailed on moldings that are often missing or have unsightly gaps due to seasonal movement pulling the nails loose over time.
I think nailed moldings are fine for retaining glass in a cabinet But I don't care for them as a sole means of joinery. I don't really like them when used to hold things while glue dries but I think this is a much more appropriate use for nails than to nail a molding on without glue and walk away thinking it is on for good. Of course cross grain applications become an issue and I think this is where the sliding dovetail comes into play.
I am not trained as a furniture maker but rather as a pattern maker and as a pattern maker if two nails will do, three are better. when I started making furniture I looked at stuff that was well over a hundred years old to see what methods hold up well over time. I often saw work with nails in it and the nailed portions rarely held up well over time so I don't use nails.
I like the look of cut nails and rose head nails and someday I will probably use them for their asthetic value but I won't be using them for the sole means of structural integrity.
Robin
Re: Nails
eliot d
I'm not a snob about it; I'm not that good. But I HATE anything metal in my wood work. Whenever I ruin a good table saw blade, it's because I ran it through a nail or screw!