New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Tuesday Night Hand Tool Chat

Posts

Re: Tuesday Night Hand Tool Chat

#26

David Barnett

Hear, hear!


Re: Tuesday Night Hand Tool Chat

#27

Re: Sharpening..

david weaver

The worst part is you'd read every word of it, the longer it was, the more angry you'd get, and the harder it would be for you to resist reading.

...cue "i wouldn't read it at all statement, I don't know how I know all of the details in your previous sharpening posts" :\

Re: Tuesday Night Hand Tool Chat

#28

Re: The joint's a-jumpin'

david weaver

If mine went out, I'd be a lot less nice, too.

But for now, it feels like I'm having a conversation with my mother...one that I've had 1000 times before on the same subject.

Re: Tuesday Night Hand Tool Chat

#29

Re: Sharpening..

CStan

It would be like watching a train wreck unfold from a distance. It appears to be moving in slow motion and you just cannot take your eyes off it.

Re: Tuesday Night Hand Tool Chat

#30

David Barnett

(Message Deleted by Poster)


Re: Tuesday Night Hand Tool Chat

#31

Re: Sharpening..

david weaver

That sums up about every conversation that the two of us have been in. I don't remember it any other way except for the marples thread months ago, and even at that, there was enough other traffic that it was still a slow train wreck. I just got to watch without spending any for fuel since the two of us actually agreed.

At least that's my point of view as an avid slow train wreck fan.

Re: Tuesday Night Hand Tool Chat

#32

Re: Tuesday Night Hand Tool Chat

CStan

One item, just something, please, to back up your opinion that he's a huckster.

I'll bet Peter Follansbee doesn't think he's a huckster.

Re: Tuesday Night Hand Tool Chat

#33

Re: Remember in "The Quiet Man"...

CStan

Well, we've done that for sure but I think 'ole Stephen was poking a stick at us with the topic he selected.

When I saw his post, I laughed and thought his sense of comedic timing impeccable.

Re: Tuesday Night Hand Tool Chat

#34

David Barnett

Oh, and don't ye be thinkin' otherwise


Re: Tuesday Night Hand Tool Chat

#35

Re: Sharpening..

CStan

Let's focus on Sellers, shall we?

Re: Tuesday Night Hand Tool Chat

#36

Re: Tuesday Night Hand Tool Chat

david weaver

I don't know if peter follansbee talks about the discontentment of others and the ills of society that have resulted as a result of departure from craft, which is sort of goofy reasoning to me in the first place.

If he's providing content, presenting an ill, and then offering a solution, I suppose it's the same thing.

It's just so much easier to tolerate when you don't attempt to sell someone into thinking the sale is the result the solution to something negative, as opposed to a stand-alone positive thing.

I'd put peter in the same basket with tools, perhaps he's a lot more frugal yet than sellers, because he's not using power tools as far as I know. the most negative thing I've seen peter say is "it doesn't make sense to spend two hours trying to figure out how to fake a panel with a router that takes 1 hour to carve." that's hardly negative.

I like peter's blog quite a bit actually, it's the only one I ever read. Good pick.

Re: Tuesday Night Hand Tool Chat

#37

Re: Sharpening..

david weaver

we're in the wrong thread for that...this is stephen's thread :\

Re: Tuesday Night Hand Tool Chat

#38

Stephen Shepherd

Charles and David

Stephen Shepherd

This is fun why don't you two guys show up tonight and continue this discussion in the CHAT ROOM.

Stephen

Re: Tuesday Night Hand Tool Chat

#39

Re: Charles and David

david weaver

here i opened this post and thought for sure that we were about to get scolded.

It'll depend on where I am and what I'm doing. If i'm awake, I may show up, but warning that I don't do anything interesting when it comes to cutting mortises, I just get out a mortise chisel and follow the method presented in robert wearing's book.

Re: Tuesday Night Hand Tool Chat

#40

I thought we were going to talk about mortises


Re: Tuesday Night Hand Tool Chat

#41

David Barnett

(Message Deleted by Poster)


Re: Tuesday Night Hand Tool Chat

#42

Re: You were right, Charles

david weaver

Charles and I are good for business about the same way Tiger Woods is good for publicity at a PGA event.

Except neither of us is as good at anything as Tiger is at golf.

Re: Tuesday Night Hand Tool Chat

#43

David Barnett

(Message Deleted by Poster)


Re: Tuesday Night Hand Tool Chat

#44

David Barnett

Nice parry


Re: Tuesday Night Hand Tool Chat

#45

Re: I haven't been to chat in ages...

david weaver

I think if charles and I would show up, we'd have a failure to perform. It's already been my max effort to actually repeat things on threads. I hate repeating and clarifying about as much as I hate to stop in the middle of work and check it. But I can't avoid that, either.

Charles might have a fixed air conditioner by then and be real rosy....well, rosy might be pushing it. Maybe quiet.

Re: Tuesday Night Hand Tool Chat

#46

This is why I have a hollow chisel mortiser.....

roger lance

less controversy :D .

Re: Tuesday Night Hand Tool Chat

#47

Ellis Walentine

The chat room is always open

Ellis Walentine

I suggest that if you and Charles need to air your differences further, that you do it there in real time, or via e-mail, or somewhere besides the public forum. When I come up for air here, I will be parking this thread in our off-site parking lot. Please, let's keep it civil from now on.

Meanwhile, everyone is invited to the chat tonight, and constructive participation is welcome.

Thanks guys.

Ellis

Re: Tuesday Night Hand Tool Chat

#48

Re: Charles and David

CStan

Well, the hucksters who were working on my air conditioner have finished and the house is cooling by the moment. The proof is in the puddin' I suppose.

I'm about to start dinner - we're tired of eating out. I'm going to run to the store for the ingredients, get a nice bottle of wine, and have something that resembles a civilized evening. You guys will have to do it without me.

Re: Tuesday Night Hand Tool Chat

#49

Re: You were right, Charles

TomD

"Except neither of us is as good at anything as Tiger is at golf. "

For any of us, that pretty much doesn't need to be said. I think the risk of being misled in that direction is pretty small.

Re: Tuesday Night Hand Tool Chat

#50

Re: Tuesday Night Hand Tool Chat

TomD

"That's huckstering. Lots of people do it, like I said below, it's not bad on its own. It is the objection to industrialization and productivity at the expense of craft while reaping a better life due to the increased disposable income from industrialization.

It happens all over the woodworking world, including one-off furniture makers. "here...looky...industrially produced furniture is ruining everything. I will make you a piece of furniture in the traditional way, and you'll pay me for something the middle and upper middle classes never would've been able to afford if we all did traditional woodwork".

Same thing. Huckstering."

I don't really see those as contradictory or particularly huckstering. Who says positions like arts and craft, or modern day craft against industrial views are absolutes. Mostly this kind of thing is only at the margins, it is pretty much impossible to be pure. As you say. These stances are reactionary they are the less than 1% reaction to the dominant culture that forms them in the first place. The world is full of relaxing nature walks that start with a miserable drive on some expressway, burning a lot of gas.