New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Something of interest from Benchcrafted....

Posts

Something of interest from Benchcrafted....

#1

Something of interest from Benchcrafted....

roger lance

I've tried and again failed to be able to successfully enter the site for a "new" Benchcrafted leg vise (the computer gods and all)....go to youtube and type in.....St. Peter's Cross....and you'll get a two minute video of a prototype that's based on an old design for leg vises....if any one can post the link, please do so....thanks. I first saw this scissors device discussed in Scott Landis' The Workbench Book (see p. 45) on Norm Vandal's Shaker style bench....its been around awhile and could probably be easily made by some of the talented people here.

Re: Something of interest from Benchcrafted....

#2

Re: Something of interest from Benchcrafted....

JDK


Re: Something of interest from Benchcrafted....

#3

Re: Something of interest from Benchcrafted....

Michael Brady

I saw this in person yesterday at the Lie-Nielsen event in Chicago. It's very imposing; floor to about chest high. The height is a function of the large scissors that eliminate the need for movable pin at the base. Jameel said that they are investigating production, and that there would be more info in the early Fall. For someone with a very large bench, this could be a useful third vise. You just have to realize that it is there all of the time and would be for certain operations, but not a general purpose vise. I'm sure there will be a level of interest. Benchcrafted makes such solid stuff that it is hard to ignore something new from them.

Re: Something of interest from Benchcrafted....

#4

Re: Something of interest from Benchcrafted....

roger lance

Michael....if you look at various benches, the vise can be of a normal height (level with the top of the bench)....the Vandal bench has the vise above the top of the bench as you saw in the prototype....so the scissors feature is doable in various sizes....I really wanted to go to the LN event in Chicago but thought my drive time would be too long....tell us about the event....any pictures??....any impressions....please post away.

Re: Something of interest from Benchcrafted....

#5

Re: Something of interest from Benchcrafted....

Michael Brady

Roger, I may have spoken a bit prematurely about the scissor leg vise proportions. From talking to others who went, this one was put together as a prototype using some Glide vise parts. The final version supposedly can be retrofitted to their leg vise hardware and could be of different sizes. You are asking the wrong person since I don't really favor the leg vise design and didn't pay a lot of attention. Some guys were really hot for this vise. You could inquire with Benchcrafted for more info.

I did get their "Moxon" dual hand screw bench top vise hardware. I will use it for dovetailing and closer work, but keep it stowed at other times. It will utilize the last big piece of 8/4 left from by bench build of a couple of years ago.

The Lie-Nielsen hand toll event is an annual must for me, more for seeing some good friends than for playing with tools. Chicago is one of their best venues from what I have heard. Jeff Miller's studio / shop is fabulous and Jeff is a gracious host. Quality vendors and tool makers were surrounded by an enthusiastic crowd of attendees. It was a bit hectic for really learning much in depth but the company was very enjoyable. Sorry, no pics due to the tight quarters. Just picture a multitude of cast iron and bronze, with tool steel accents and smooth hardwood handles. Lots of it.

Re: Something of interest from Benchcrafted....

#6

Re: Something of interest from Benchcrafted.... *LINK*

Bill Houghton, Sebastopol, CA

I find it interesting that we're seeing the return of, or in some cases reinvention of, old ideas in hand tools and bench fitments like vises.

If Wilton had any sense, they'd reissue their L-shaped vise from the 60s/70s. Even at Wilton prices, I bet they could move some.


Looks like this