We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
While walking around the woodworking show last Friday in Somerset, NJ, I spotted a local tool collector, Frank Scordo, with a wonderful collection of hammers from bygone days. Apparently this is only a fraction of his collection, and they're all for sale. If you're interested, his e-mail address is toolsnj@aol.com.
I'd love to know how some of these tools were intended to be used.
There are some really bizarre hammers there. I like the hammer-adze in the last picture. The large "baby rattle" sphere hammers would be very difficult to use accurately so I have no idea why that needed to be created. Interesting!
I saw one of the finer museums I've ever seen on a trip* to Minnesota and northern Iowa with my then-14-year-old son. Two brothers in the southern Minnesota farmlands had gathered stuff over the years and installed it in one of those Quonset-hut metal farm buildings (or maybe it was two - this was 20 years ago now). Being dairy farmers, they had naturally divided the building into bays about the size of a horse stall, with each stall dedicated to one subject.
One stall was entirely hammers, baling-wired to the walls. No explanations, no helpful signs; museum-studies professionals would not have been deeply impressed. But the several hundred hammers of different sizes, shapes, handle lengths, etc. brought home how finely specialized even mundane tools were, back when the power choices for tools involved people, horses, or oxen, with occasional forays into steam or water power.
Some of the hammers in Ellis' post look to have been brilliant inspirations that turned out not to be quite so brilliant after all (people will no doubt see laser-assisted drywall saws the same way when they turn up in collections a generation from now; if they do). They remain interesting.
*That trip yielded two great museums; the other one was in Winona, run by a nice guy who, again, had just stuck to a lot of stuff in his life and wanted a chance to show it off. He charged us 50 cents each, which, even then, was trivial money, to show us a piece of the cable from the bridge that used to span the Mississippi river there (complete with a photo of a truck stuck on one of the sharp turns at the bridge entrance - the engineers apparently didn't anticipate that vehicles would get larger than Model Ts) and other delights of local history, botany, etc. It made the official city/county museum, which we had just visited, look pitiful.
Alas, they're probably both gone now. The museum owners in both cases were no longer spry youngsters.
I don't think all of those are hammers. There is one that looks to me like a blacksmiths flatter (or maybe set hammer). These are considered "top tools" not hammers.
...in the narrow (and, no doubt, correct) sense of the word. I think the term hammer has generalized in people's mind to include everything with a handle and a striking head.
Can you give us a better definition? What qualifies as a hammer?
I really like the one with claws on both "faces" and no stricking surface, But I think my favorite is the one with all the little spikes in a large eye that are held in with a metal wedge. I would love to kmow what that one was used for.
I would say that a hammer is a tool used to strike (or drive) something else. Blacksmiths top tools are in the realm of tools that are struck by hammers so they really aren`t hammers themselves. They are more like cold chisels or stamps with hammer like handles.
Those double clawed "hammers" (the ones will claws only and no striking face) have more in common with nail,pinch or wrecking bars than they do with functional hammers. Granted the cheek could be used to drive a nail but then you`d scar up the cheek of the "hammer" and the wood as well when you finally drove the nail flush.
I almost went and found a link to the demotivator poster for committees or meetings, but since I saw those almost a decade ago, they must be passe by now!
is that a two handled hammer in the top left corner of the first picture? The head doesn't look to be larger from here, but I'm confused why there would be two handles on the table for that tool.